9
adunc
prog
B-3
rl-sp
3)00
B-2
rl-md
hi
B-1
Engineer level()Raely Output
■Operating Steps
Enter
DecreaseIncrease
Shift
Relay mode Setting type:
LO HI LO.HLD HI.HLD// / /
/OFF
lo：PV Setpoint relay energized＜， 。
hi：PV Setpoint relay energized＞， 。
lo.hld：Display Setpoint relay energized＜， ,
and hold energized status。
hi.hld：Display Setpoint relay energized＞， ,
and hold energized status。
off：Close relay function when relay is off,
,relay remain open, LED will not light。
Press values blink press change value or selection,, &
when done press secto next setting or hold 1.
to previous selection list
Enter
DecreaseIncrease
Shift
Parameters Display Setting Operation
Relay value
setting
Setting range:
-19999~29999 Press values blink press change value or selection,, &
when done press secto next setting or hold 1.
to previous selection list
Default:Hi
Program selection prog Programming for basic(
or advance setting )
Default:basic
Enter
DecreaseIncrease
Shift
In parameters setting level, default is basic during setting it，,
only show common functions,advance functions is hidden.User
can change setting in each group , set it[]prog
advnc()advance to show all functions.
rl-fd
)0)0
B-8
rl-rd
)0)0
B-7
rl-hy
)00
B-6
rl-sd
)0)0
B-5
rl-sb
)00
B-4 Relay stard band Setting range:
00.00~99.99
Default:0.00
Enter
DecreaseIncrease
Shift
When display exceed set start band and after Start
delay time then relay compare PV value, energized.,
Relay start delay
time Setting range:
0.00.00 9.59.9~
Default:0.00.0
Press values blink press change value or selection,, &
when done press secto next setting or hold 1.
to previous selection list
Relay hysteresis
time Setting range:
0. 0 50.000~
Default:0.00
Press values blink press change value or selection,, &
when done press secto next setting or hold 1.
to previous selection list
Relay start
delay time Setting range:
0.00.0~9.59.9
Default:0.00.0
Press values blink press change value or selection,, &
when done press secto next setting or hold 1.
to previous selection list
Relay
de-energized
delay time
Setting range:
0.00.0~9.59.9
Default:0.00.0
Press values blink press change value or selection,, &
when done press secto next setting or hold 1.
to previous selection list
Back to B-1
Default:.030 0
