Advantech USB-4711A Manuale utente

USB-4711A

150 kS/s, 12-bit, USB

Multifunction Module

User Manual

USB-4711A User Manual ii

The documentation and the software included with this product are copy-

righted 2006 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

1st Edition

Printed in Taiwan December 2006

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

USB-4711A User Manual iv

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from Advantech. Please

contact your local supplier for ordering information.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Document Feedback

To assist us in making improvements to this manual, we would welcome

comments and constructive criticism. Please send all such - in writing to:

[email protected]

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the

products from damage.

1. To avoid electrical shock, always disconnect the power from your

PC chassis before you work on it. Don't touch any components on

the CPU card or other cards while the PC is on.

2. Disconnect power before making any configuration changes. The

sudden rush of power as you connect a jumper or install a card may

damage sensitive electronic components.

v Table of Contents

Contents

Chapter 1 Introduction ..................................................... 2

1.1 Features ............................................................................. 2

1.2 Software Overview............................................................ 3

1.2.1 More on the CD ............................................................. 3

Chapter 2 Installation ....................................................... 6

2.1 Unpacking ......................................................................... 6

2.2 Driver Installation ............................................................. 7

2.3 Hardware Installation ........................................................ 9

2.4 Hardware Uninstallation ................................................... 9

Figure 2.1:Unplug or Eject Hardware Dialog .............. 10

Figure 2.2:Stop a Hardware device dialog box ............ 10

Chapter 3 Signal Connections ........................................ 12

3.1 Overview ......................................................................... 12

3.2 I/O Connectors ................................................................ 12

3.2.1 Pin Assignment ............................................................ 12

Figure 3.1:I/O Connector Pin Assignment .................. 13

3.2.2 I/O Connector Signal Description ................................ 14

Table 3.1:I/O Connector Signal Description ............... 14

3.2.3 LED Indicator Status Description ................................ 15

Table 3.2:LED Indicator Status Description ................ 15

3.3 Analog Input Connections............................................... 16

3.3.1 Single-ended Channel Connections ............................. 16

Figure 3.2:Single-Ended Input Channel Connection ... 16

3.3.2 Differential Input Connections .................................... 17

Figure 3.3:Differential Input Channel Connection ...... 17

3.4 Analog Output Connections (Voltage)............................ 18

Figure 3.4:Analog Output Channel Connections ......... 18

3.5 Trigger Source Connections............................................ 18

3.5.1 Internal Pacer Trigger Connection ............................... 18

3.5.2 External Trigger Source Connection ........................... 18

3.6 Field Wiring Considerations ........................................... 19

Appendix A Specifications ................................................. 22

A.1 Analog Input.................................................................... 22

A.2 Analog Output ................................................................. 22

A.3 Non-Isolated Digital Input/Output .................................. 23

A.4 Event/Frequency Input .................................................... 23

A.5 Pulse Output .................................................................... 23

A.6 General ............................................................................ 23

USB-4711A User Manual vi

CHAPTER

Introduction

This chapter will provide information

on the features of the DAS module, a

quick start guide for installation, and

some brief information on software and

accessories for USB-4711A Module.

Sections include:

• Features

• Software Overview

USB-4711A User Manual 2

Chapter 1 Introduction

Thank you for buying the Advantech USB-4711A data acquisition mod-

ule. The Advantech USB-4711A is a powerful data acquisition (DAS)

module for the USB port. It features a unique circuit design and complete

functions for data acquisition and control.

1.1 Features

USB-4711A has the most requested measurement & control functions:

• 16 single-ended/ 8 differential or combination analog input channels

• 12-bit resolution A/D converter, with up to 150 kS/s sampling rate

• 8 digital input & 8 digital output channels (TTL Level)

• 2 analog output channels

• 16-bit programmable counter/timer x 1

• Pulse output channel x 1

• Programmable gain for each analog input channel

• Automatic channel/gain scanning

• Onboard 1K samples FIFO buffer for AI channels

• Bus-powered

• Device status LED indicator

• Removable on-module wiring terminal

• Supports high-speed USB 2.0

• Auto calibration function

• Hot swappable

Note: The USB chip on your system may have a limitation on

the number of USB devices it will support. Normally,

only five USB-4711A devices can be supported.

Note: The power output of an USB port is 500 mA, while the

USB-4711A requires 360 mA (typical). This means that

if an USB hub is used, it will need an external power

supply to support more than one USB-4711A device.

3 Chapter1

1.2 Software Overview

Advantech offers a rich set of DLL drivers, third-party driver support and

application software on the companion CD-ROM to help fully exploit the

functions of your device. Advantech’s Device Drivers feature a complete

I/O function library to help boost your application performance and work

seamlessly with development tools such as Visual C++, Visual Basic,

Inprise C++ Builder, and Inprise Delphi.

1.2.1 More on the CD

For instructions on how to begin programming in each development tool,

Advantech offers some tutorial chapters in the Device Drivers Manual for

your reference. Please refer to the corresponding sections in these chap-

ters on the Device Drivers Manual to begin your programming efforts.

You can also look at the example source code provided for each program-

ming tool, since they can get you very well oriented.

The Device Drivers Manual can be found on the companion CD-ROM.

Alternatively, if you have already installed the Device Drivers on your

system, The Device Drivers Manual can be readily accessed through the

Start button:

Start/Programs/Advantech Automation/Advantech Device Manager /

Device Driver’s Manual

After you install the examples, (in CD-ROM:\Example\) the example

source code can be found under the corresponding installation folder such

as the default installation path:

\Program Files\Advantech\ADSAPI\Examples

USB-4711A User Manual 4

Indice

Altri manuali Advantech Unità di controllo

Advantech

Advantech B+B SmartWorx IE-iMcV-2xLIM Manuale utente

Advantech

Advantech PCM-2610B Manuale di installazione e funzionamento

Advantech

Advantech PCM-3380 Manuale di installazione e funzionamento

Advantech

Advantech MIC-75G20-10B1 Manuale di installazione e funzionamento

Advantech

Advantech PCL-812PG Manuale utente

Advantech

Advantech AMAX-4800 Series Manuale utente

Advantech

Advantech SOM-5780 Guida

Advantech

Advantech WISE-4610 Series Manuale di installazione e funzionamento

Advantech

Advantech B+B SmartWorx 232PTC9 Manuale utente

Advantech

Advantech MIC-75M11 Manuale utente

Advantech

Advantech Network Device USB-4761 Manuale di installazione e funzionamento

Advantech

Advantech AMAX-175 Series Manuale utente

Advantech

Advantech PCM-3526 Manuale di installazione e funzionamento

Advantech

Advantech PCM-3910 Manuale di installazione e funzionamento

Advantech

Advantech SOM-6898 Manuale utente

Advantech

Advantech PCM-3810I Manuale di installazione e funzionamento

Advantech

Advantech USB-4750 Manuale utente

Advantech

Advantech iDAQ-815 Manuale utente

Advantech

Advantech Qseven SOM-3567 Manuale utente

Advantech

Advantech USB-4716 Manuale utente

Advantech

Advantech PCA-TPMSPI Manuale di installazione e funzionamento

Advantech

Advantech PCM-3347 Series Manuale utente

Advantech

Advantech ADAM-3656 Manuale di installazione e funzionamento

Advantech

Advantech Adam 4000 Series Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente