AEMC instruments K100 Manuale utente

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DC/AC MicroProbe Models K100 and K110

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

using standards and instruments traceable to

international standards.

We guarantee that at the time of shipping your

The recommended calibration interval for this

instrument is 12 months and begins on the date of

receipt by the customer. For recalibration, please

use our calibration services. Refer to our repair and

calibration section at

Serial #:

Cata

Model #: K100 / K110

ll in the appropriate date as indicated:

Date Received:

Date Calibration Due:

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DC/AC MicroProbe Models K100 and K110

TABLE OF CONTENTS

1.1 PRECAUTIONS FOR USE ....................................................... 7

1.2 RECEIVING YOUR SHIPMENT................................................ 7

1.3 ORDERING INFORMATION ..................................................... 7

2.1 DESCRIPTION ........................................................................... 8

2.2 MODEL K100 FEATURES ......................................................... 9

2.3 MODEL K110 FEATURES........................................................ 10

3.1 ELECTRICAL SPECIFICATIONS ........................................... 11

3.2 ENVIRONMENTAL SPECIFICATIONS.................................. 12

3.3 MECHANICAL SPECIFICATIONS ......................................... 12

3.4 SAFETY SPECIFICATIONS ................................................... 12

3.5 TYPICAL FREQUENCY RESPONSE .................................... 13

4.1 MAKING MEASUREMENTS WITH THE K100/K110 ............. 14

4.2 INDICATOR LIGHTS - GREEN AND RED LEDS.................. 14

4.3 MODEL K100 OPERATION EXAMPLES ............................... 15

4.3.1 DC Current Measurement Example (K100)........................ 15

4.3.2 DC Current Measurement Example - Current Reversed

(K100) ............................................................................................. 15

4.3.3 Two-Wire Sum-of-Currents Example (K100) ..................... 16

(K100).................. 16

4.3.5 Oscilloscope Measurement Example (K100) ..................... 17

4.3.6 Maximum Step Discontinuity Example (K100)................... 17

4.4 MODEL K110 OPERATION EXAMPLES................................ 18

4.4.1 Measuring the DC Component of an (AC+DC) Waveform

(K110).............................................................................................. 18

4.4.2 Measuring the AC Component of an (AC+DC) Waveform

(K110).............................................................................................. 18

4.4.3 Oscilloscope Measurement Example (K110) ..................... 19

4.5 TIPS FOR MAKING PRECISE MEASUREMENTS............... 19

4.6 RESIDUAL READINGS FOLLOWING SEVERE

OVERLOADS ................................................................................................22

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DC/AC MicroProbe Models K100 and K110

5.1 BATTERY INSTALLATION ...................................................... 23

5.2 CLEANING ............................................................................... 24

5.3 REPAIR AND CALIBRATION ................................................. 25

5.4 TECHNICAL AND SALES ASSISTANCE .............................. 25

5.5 LIMITED WARRANTY............................................................. 26

5.5.1 Warranty Repairs.............................................................. 26

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DC/AC MicroProbe Models K100 and K110

Thank you for purchasing an AEMC®

For the best results from your instrument and for your safety, you must

read the enclosed operating instructions carefully and comply with the

product.

Indicates a WARNING. Whenever this symbol

is present, the operator must refer to the user manual before operation

Indicates a risk of electric shock. The voltage at the parts marked with this

symbol may be dangerous

This product complies with the Low Voltage & Electromagnetic Compatibility

European directives (73/23/CEE & 89/336/CEE)

CAT IV corresponds to measurements performed at the primary electrical

supply (< 1000 V).

Example: primary overcurrent protection devices, ripple control units, and

meters.

CAT III corresponds to measurements performed in the building installa-

tion at the distribution level.

CAT II corresponds to measurements performed on circuits directly con-

nected to the electrical distribution system.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DC/AC MicroProbe Models K100 and K110

These safety warnings are provided to ensure the safety of personnel and

proper operation of the instrument.

• Read the instruction manual completely and follow all the safety

information before attempting to use or service this instrument.

• Use caution on any circuit: Potentially high voltages and currents may

be present and may pose a shock hazard.

•

K110. Never exceed the maximum voltage ratings given.

• Safety is the responsibility of the operator.

• NEVER open the back of the instrument while connected to any circuit

or input.

• ALWAYS connect the Model K100/K110 adapter to the display device

before clamping the probe onto the sample under test.

• ALWAYS inspect the instrument, probe, probe cable and output

terminals prior to use. Replace any defective parts immediately.

• NEVER use the Model K100/K110 on electrical conductors rated above

300V CAT II, EN61010-1.

Upon receiving your shipment, make sure that the contents are consistent

with the packing list. Notify your distributor of any missing items. If the

rier and notify your distributor at once, giving a detailed description of any

damage.

DC/AC MicroProbe Model K100................................................

DC/AC MicroProbe Model K110 .................................................

Both models include an electronic plug-in module with an attached current

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DC/AC MicroProbe Models K100 and K110

Model K100 and Model K110 are low current measurement instruments

that feature a compact, high sensitivity current probe. Unlike other instru-

ments, the Model K100 exhibits a wide dynamic operating range, which

extends from below 100µA to ± 4.5A peak, from DC to 2.0kHz*, without the

need for ranging. The K110 has an operating range of 100µA to ± 450mA

Peak, from DC to 1500Hz.*

Models K100 and K110 are designed to be operated in conjunction with a

digital multimeter, oscilloscope or recording device. The MicroProbe out-

puts the current measured in the form of a voltage that is the image of the

current, in shape and amplitude. The Model K100 outputs 1mV per mA of

measured current. The Model K110 outputs 10mV per mA of measured

current. To take advantage of the Model K100 high sensitivity, best results

are obtained through 4-1/2 digit (or more) DMM with a relative zero func-

tion. The Model K110 was designed to provide the operator with enhanced

low current linearity and accuracy, but is limited to 450mA Peak current.

The Model K100/K110 always outputs a signal proportional to the total

current (AC+DC) in the conductor under test. This has proven to be the

most versatile signal output format, and allows the user to isolate and

measure DC and AC components of measured current separately, if so

desired. Typical applications include 4 to 20mA loop measurements, auto-

motive current applications, benchtop electronic current consumption in

circuits, and other applications requiring very low current measurements

in crowded areas.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DC/AC MicroProbe Models K100 and K110

Figure 1

1. Positive: Red banana plug (+)

2. Negative: Black banana plug (-)

3. Power ON indicator (green LED)

4. OVERLOAD indicator (red LED)

5. Power switch

6. Zero adjust knob (push in and turn to zero)

7. Probe window aperture

8. Probe handle

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DC/AC MicroProbe Models K100 and K110

Figure 2

1. Positive: Red banana plug (+)

2. Negative: Black banana plug (-)

3. Power ON indicator (green LED)

4. OVERLOAD indicator (red LED)

5. Power switch

6. Zero adjust knob (push in and turn to zero)

7. Probe window aperture

8. Probe handle

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

DC/AC MicroProbe Models K100 and K110

MODEL K100

0 to ± 4.5 ADC

(0 to 3) Arms (sinusoidal)

1 mV/mA

Resolution:

DC: 50 µA typical

AC: 100 µA typical

DC: 1 % Reading ± 200 µA

AC: 2 % Reading ± 200 µA

Output Noise:

< 100 µV, DC to 3 kHz

DC to 2 kHz (@ -3 dB sine)

Zero Adjust:

± 25 mA

MODEL K100

0 to ± 4.5 ADC

(0 to 3) Arms (sinusoidal)

1 mV/mA

Resolution:

DC: 50 µA typical

AC: 100 µA typical

DC: 1 % Reading ± 200 µA

AC: 2 % Reading ± 200 µA

Output Noise:

< 100 µV, DC to 3 kHz

DC to 2 kHz (@ -3 dB sine)

Zero Adjust:

± 25 mA

< 200 µS, (10 to 90) % Vout

< 200 µS, (90 to 10) % Vout

200

Probe Inductance: < 1 µH

< 120 µA, null to maximum

Indicates momentary or continuous overload

Indicates power ON and good battery

LED (Green) ON between (6.5 to 10)V

Power Source: 9 V alkaline, NEDA 1604, 6LR61 or IEC 6LF22

Battery life 20 h approx. with alkaline battery

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Questo manuale è adatto per i seguenti modelli

Altri manuali AEMC instruments Strumento di misura

AEMC instruments

AEMC instruments AmpFlex Manuale utente

AEMC instruments

AEMC instruments PowerPad IV 8345 Manuale utente

AEMC instruments

AEMC instruments 6505 Manuale utente

AEMC instruments

AEMC instruments Measure Up PowerPad III Manuale utente

AEMC instruments

AEMC instruments MN09 Manuale utente

AEMC instruments

AEMC instruments MN375 Manuale utente

AEMC instruments

AEMC instruments 6527 Manuale utente

AEMC instruments

AEMC instruments Chauvin Arnoux 6412 Manuale utente

AEMC instruments

AEMC instruments 1035 Manuale utente

AEMC instruments

AEMC instruments JM852 Manuale utente

AEMC instruments

AEMC instruments MN02 Manuale utente

AEMC instruments

AEMC instruments 5070 Manuale utente

AEMC instruments

AEMC instruments MD303 Manuale utente

AEMC instruments

AEMC instruments OX5042 Manuale utente

AEMC instruments

AEMC instruments SIMPLE LOGGER L100 Manuale utente

AEMC instruments

AEMC instruments JM865A Manuale utente

AEMC instruments

AEMC instruments MR525 Manuale utente

AEMC instruments

AEMC instruments 6501 Manuale utente

AEMC instruments

AEMC instruments CA846 Manuale utente

AEMC instruments

AEMC instruments AmpFlex Manuale utente

AEMC instruments

AEMC instruments A196-24-BK Manuale utente

AEMC instruments

AEMC instruments 6505 Manuale utente

AEMC instruments

AEMC instruments MN103 Manuale utente

AEMC instruments

AEMC instruments 6550 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente