Agilent Technologies 54751A Manuale utente

FINAL TRIM SIZE : 7.5 in x 9.0 in

User's Guide

Agilent 83483A,4A,4B

and 54751A,2A,2B

Plug-In Modules

FINAL TRIM SIZE : 7.5 in x 9.0 in

Agilent part number: 83483-90010 and 54751-97011

Printed in US

AApril 2000

Notice

The information contained in this document is subject to change

without notice

.Agilent T

echnologies makes no warranty of any kind

with regard to this material, including but not limited to

,the implied

warranties of merchantability and tness for aparticular purpose

.Agilent

echnologies shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance

,or use

of this material.

Restricted Rights Legend.

Use

,duplication, or disclosure by the U

Government is subject to restrictions as set forth in subparagraph (c) (1) (ii)

of the Rights in T

echnical Data and Computer Software clause at DF

ARS

252.227-7013 for DOD agencies

,and subparagraphs (c) (1) and (c) (2) of the

Commercial Computer Software Restricted Rights clause at F

AR 52.227-19 for

other agencies



echnologies 2000

written permission is prohibited, except as allowed under the copyright laws

FINAL TRIM SIZE : 7.5 in x 9.0 in

Certication

Agilent Technologies certies that this product met its published specications

at the time of shipment from the factory

.Agilent T

echnologies further

certies that its calibration measurements are traceable to the United States

National Institute of Standards and T

echnology

,to the extent allowed by

the Institute's calibration facility, and to the calibration facilities of other

International Standards Organization members

iii

FINAL TRIM SIZE : 7.5 in x 9.0 in

arranty

This Agilent T

echnologies instrument product is warranted against defects in

material and workmanship for aperiod of one year from date of shipment.

During the warranty period, Agilent T

echnologies will, at its option, either

repair or replace products which prove to be defective

or warranty service or repair

,this product must be returned to aservice

facility designated by Agilent T

echnologies

.Buyer shall prepay shipping

charges to Agilent T

echnologies and Agilent T

echnologies shall pay shipping

charges to return the product to Buyer

.However

,Buyer shall pay all shipping

charges

, duties

,and taxes for products returned to Agilent T

echnologies from

another country

Agilent T

echnologies warrants that its software and rmware designated by

Agilent T

echnologies for use with an instrument will execute its programming

instructions when properly installed on that instrument. Agilent T

echnologies

does not warrant that the operation of the instrument, or software

,or

rmware will be uninterrupted or error-free

Limit

tion of W

arranty

The foregoing warranty shall not apply to defects resulting from improper

or inadequate maintenance by Buyer

,Buyer-supplied software or

interfacing, unauthorized modication or misuse

,operation outside of the

environmental specications for the product, or improper site preparation

or maintenance

NO OTHER W

ARRANTY IS EXPRESSED OR IMPLIED

GILENT

TECHNOLOGIES SPECIFICALL

YDISCLAIMS THE IMPLIED W

ARRANTIES

OF MERCHANT

ABILITY AND FITNESS FOR AP

ARTICULAR PURPOSE.

clusive Remedies

THE REMEDIES PRO

VIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE

REMEDIES

GILENT TECHNOLOGIES SHALL NOT BE LIABLE FOR

ANY DIRECT, INDIRECT

, SPECIAL, INCIDENT

AL, OR CONSEQUENTIAL

DAMAGES, WHETHER B

ASED ON CONTRA

, TORT

, OR ANY OTHER

LEGAL THEORY

FINAL TRIM SIZE : 7.5 in x 9.0 in

Assistance

Product maintenance agreements and other customer assistance agreements

are available for A

gilent T

echnologies products.

Sales and service oces

Agilent T

echnologies has sales and service oces located around the world

to provide complete support for Agilent T

echnologies products

oobtain

servicing information or to order replacement parts

,contact the nearest

Agilent T

echnologies Sales and Service Oce

.In any correspondence or

telephone conversation, refer to the instrument by its model number

,serial

number

,and option designation.

Before returning an instrument for service

,call the Agilent

Technologies Instrument Support Center at (800) 403-0801,

visit the Test and Measurement W

eb Sites by Country page at

http://www.tm.agilent.com/tmo/country/English/index.html, or call one of the

numbers listed below

FINAL TRIM SIZE : 7.5 in x 9.0 in

Agilent T

echnologies Service Numbers

Austria 01/25125-7171

Belgium 32-2-778.37.71

Brazil (11) 7297-8600

China 86 10 6261 3819

Denmark 45 99 12 88

Finland 358-10-855-2360

France 01.69.82.66.66

German

y0180/524-6330

India 080-34 35788

Italy +39 02 9212 2701

Ireland 01 615 8222

Japan (81)-426-56-7832

Korea 82/2-3770-0419

Mexico (5) 258-4826

Netherlands 020-547 6463

Norwa

y22 73 57 59

Russia +7-095-797-3930

Spain (34/91) 631 1213

Sweden 08-5064 8700

Switzerland (01) 735 7200

United Kingdom 01 344 366666

United States and Canada (800) 403-0801

FINAL TRIM SIZE : 7.5 in x 9.0 in

Declaration of Conformity

vii

FINAL TRIM SIZE : 7.5 in x 9.0 in

viii

FINAL TRIM SIZE : 7.5 in x 9.0 in

Safety Symbols

The following safety symbols are used throughout this manual. F

amiliarize

yourself with each of the symbols and its meaning before operating this

instrument.

CAUTION

The

caution

sign denotes a hazard to the instrument. It calls attention to a

procedure which, if not correctly performed or adhered to

,could result in

damage to or destruction of the instrument. Do not proceed beyond a

caution

sign until the indicated conditions are fully understood and met.

WARNING

The

warning

sign denotes alife-threatening hazard. It calls attention to a

procedure which, if not correctly performed or adhered to

,could result

in injury or loss of life

.Do not proceed beyond a

warning

sign until the

indicated conditions are fully understood and met.

Instruction

Manual

The

instruction manual

symbol. The product is marked with this symbol when it is necessary

for the user to refer to the instructions in the manual.

FINAL TRIM SIZE : 7.5 in x 9.0 in

General Safety Considerations

WARNING

Before this instrument is switched on

,make sure it has been properly

grounded through the protective conductor of the ac power cable to a

socket outlet provided with protective earth contact.

Any interruption of the protective (grounding) conductor

,inside or

outside the instrument, or disconnection of the protective earth terminal

can result in personal injury

WAR

NING

There are many points in the instrument which can, if contacted, cause

personal injury. Be extremely careful.

Any adjustments or service procedures that require operation of the

instrument with protective covers removed should be performed only by

trained service personnel.

WARNING

If this instrument is not used as specied, the protection provided by the

equipment could be impaired. This instrument must be used in anormal

condition (in which all means for protection are intact) only

CAUTION

Before this instrument is switched on,

make sure its primary power circuitry

has been adapted to the voltage of the ac power source

ailure to set the ac power input to the correct voltage could cause damage to

the instrument when the ac power cable is plugged in.

CAUTION

Electrostatic discharge (ESD) on or near input connectors can damage circuits

inside the instrument. Repair of damage due to misuse is

not

covered under

warranty

Before connecting any cable to the electrical input, momentarily short the

center and outer conductors of the cable together

.Personnel should be

properly grounded, and should touch the frame of the instrument before

touching any connector

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Unità di controllo

Agilent Technologies

Agilent Technologies 75000 Series C Manuale utente

Agilent Technologies

Agilent Technologies 8490D Manuale di servizio

Agilent Technologies

Agilent Technologies 70341A Manuale utente

Agilent Technologies

Agilent Technologies E8482A Manuale utente

Agilent Technologies

Agilent Technologies N5532A Manuale

Agilent Technologies

Agilent Technologies G1157A Manuale utente

Agilent Technologies

Agilent Technologies E2259A Istruzioni operative

Agilent Technologies

Agilent Technologies VME VXI 75000 B Series Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies 83481A Manuale utente

Agilent Technologies

Agilent Technologies 1200 series Manuale utente

Agilent Technologies

Agilent Technologies E2261A Istruzioni operative

Agilent Technologies

Agilent Technologies 81630B Manuale utente

Agilent Technologies

Agilent Technologies LC Series Manuale utente

Agilent Technologies

Agilent Technologies 8495D Manuale di servizio

Agilent Technologies

Agilent Technologies 81610A Manuale utente

Agilent Technologies

Agilent Technologies InfinityLab G4237A Manuale utente

Agilent Technologies

Agilent Technologies 81618A Manuale utente

Agilent Technologies

Agilent Technologies 355C Manuale di servizio

Agilent Technologies

Agilent Technologies E8361AU-016 Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies Turbo-V Manuale utente

Agilent Technologies

Agilent Technologies N5532A Manuale

Agilent Technologies

Agilent Technologies TwisTorr 305 FS Series Manuale utente

Agilent Technologies

Agilent Technologies 81662A Manuale utente

Agilent Technologies

Agilent Technologies 83486A Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente