Agilent Technologies E8257DS02 Manuale utente

Agilent E8257DS02-S15 Source Modules User Guide

http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html

The E8257DS02, S03, S05, S06, S08, S10, S12, and S15 are Millimeter-wave Source Modules that

are manufactured by Oleson Microwave Labs (OML) and is provided as an ordering convenience by

Agilent Technologies. This product can be ordered directly from OML. For additional Millimeter-wave

Source Modules information go to the Agilent website at http://www.agilent.com/find

ManualLib.com collects and classifies the global product

instrunction manuals to help users access anytime and

anywhere, helping users make better use of products.

http://www.manuallib.com

Agilent Technologies

E8257DS02 - S15

User’s Guide

Millimeter Source Modules

E8257DS02, E8257DS03, E8257DS05, E8257DS06, E8257DS08,

E8257DS10, E8257DS12 and E8257DS15

Manufacturing Part Number: E8251-90283

Printed in USA April 2014

Supersede November 2011

This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html

Warranty Statement

THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED “AS IS,” AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, AGILENT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. AGILENT SHALL NOT BE LIABLE FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR ANY INFORMATION CONTAINED HEREIN. SHOULD AGILENT AND THE USER HAVE

A SEPARATE WRITTEN AGREEMENT WITH WARRANTY TERMS COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE TERMS, THE WARRANTY TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

DFARS/Restricted Rights Notice

If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is

delivered and licensed as “Commercial computer software” as defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in FAR 2.101(a) or as “Restricted computer software” as defined in

FAR 52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or

disclosure of Software is subject to Agilent Technologies’ standard commercial license terms, and

non-DOD Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights

as defined in FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited

Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html

iii

Safety Notes

The following safety notes are used throughout this document. Familiarize yourself with each of these

notes and its meaning before performing any of the procedures in this document.

WARNING Warning denotes a hazard. It calls attention to a procedure which, if not correctly

performed or adhered to, could result in injury or loss of life. Do not proceed

beyond a warning note until the indicated conditions are fully understood and met.

CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not correctly

performed or adhered to, could result in damage to or destruction of the instrument.

Do not proceed beyond a caution sign until the indicated conditions are fully

understood and met.

Definitions

•Specifications describe the performance of parameters covered by the product warranty (temperature

+20 to +30 °C, unless otherwise noted.)

•Ty p i c a l describes additional product performance information that is not covered by the product

warranty. It is performance beyond specification that 80% of the units exhibit with a 95% confidence

level over the temperature range 20 to 30 °C. Typical performance does not include measurement

uncertainty.

•Nominal values indicate expected performance or describe product performance that is useful in the

application of the product, but is not covered by the product warranty.

•Characteristic Performance describes performance parameter that the product is expected to meet

before it leaves the factory, but is not verified in the field and is not covered by the product warranty. A

characteristic includes the same guard bands as a specification.

This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html

Contents

Contents-1

E8257DS02-S15

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Content list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Safety and Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Safety Earth Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Statement of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Before Applying Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connector Care and Cleaning Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Electrostatic Discharge Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Instrument Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Battery Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Electrical Safety Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

EMI and EMC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Agilent Support, Services, and Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Service and Support Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Contacting Agilent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Shipping Your Product to Agilent for Service or Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html

Contents-2

Contents

This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html

User’s Guide E8251-90283 1

E8257DS02-S15

This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html

2User’s Guide E8251-90283

Introduction E8257DS02-S15

Introduction

The E8257DS02, S03, S05, S06, S08, S10, S12, and S15 are Millimeter-wave Source Modules that are

manufactured by Oleson Microwave Labs (OML) and is provided as an ordering convenience by Agilent

Technologies. This product can be ordered directly from OML. For additional Millimeter-wave Source

Modules information go to the Agilent website at http://www.agilent.com/find

This product is warranted by OML against defective materials and workmanship. Refer to documentation

supplied with this product or go to http://www.omlinc.com for more information.

NOTE A periodic calibration is not required for millimeter-wave modules.

Description

The millimeter-wave source modules are designed to work with the E8247C, E8257C, E8257D, E8267C or

E8267D PSG Series Synthesized Sources.

The following list of adapters are required to connect the PSG RF Output to the millimeter-wave source

module RF Input. The adapter is included with the PSG product, but is not included with the

millimeter-wave source module. Refer to the following table for required adapters.

Content list

Each source module ordered includes one each of the standard accessories listed below:

• Source Module Interface cable (2 meter)

• RF cable SMA (m) to SMA (m) (1 meter)

Table 1 Ada pter s

Instrument Options Adapter Description Agilent

Part Number

520 3.5 mm (f) to (f) 5061-5311

532, 540, 550 and 567 2.4 mm (f) to 3.5 mm (f) 1250-2187

1ED 3.5 mm (f) to Type-N (m) 1250-1744

This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html

User’s Guide E8251-90283 3

E8257DS02-S15 System Setup

System Setup

1. Connect the interface cable (included with this option) from the millimeter-wave source module and to

the rear panel on the PSG. Refer to Figure 1.

2. Connect the RF cable (included with this option) from the SMA RF Input connector on the

millimeter-wave source module to the RF Output connector on the PSG, using the adapter listed in

Ta b l e 1 . Refer to Figure 2.

Figure 1 Interface Cable Installation

Figure 2 RF Cable Installation

Interface Cable

Source Module Interface Connector

RF Cable

Millimeter

Source RF Output

RF Cable

This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Unità di controllo

Agilent Technologies

Agilent Technologies 81662A Manuale utente

Agilent Technologies

Agilent Technologies LC Series Manuale utente

Agilent Technologies

Agilent Technologies TwisTorr Medium-TMP X3512-64016 Manuale utente

Agilent Technologies

Agilent Technologies 8494A Manuale di servizio

Agilent Technologies

Agilent Technologies 70341A Manuale utente

Agilent Technologies

Agilent Technologies VPI Series Manuale utente

Agilent Technologies

Agilent Technologies 1200 series Manuale utente

Agilent Technologies

Agilent Technologies 75000 SERIES B Manuale utente

Agilent Technologies

Agilent Technologies E2261A Istruzioni operative

Agilent Technologies

Agilent Technologies G4315A Manuale utente

Agilent Technologies

Agilent Technologies 81663A Manuale utente

Agilent Technologies

Agilent Technologies 54753A Manuale utente

Agilent Technologies

Agilent Technologies 6850 GC Manuale utente

Agilent Technologies

Agilent Technologies 8495D Manuale di servizio

Agilent Technologies

Agilent Technologies CrossLab RapidFire 400 Manuale utente

Agilent Technologies

Agilent Technologies VME VXI 75000 B Series Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies 83400 Series Manuale utente

Agilent Technologies

Agilent Technologies X3507-64002 Manuale utente

Agilent Technologies

Agilent Technologies G1360A Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies N5102A Manuale utente

Agilent Technologies

Agilent Technologies E1339A Manuale del proprietario

Agilent Technologies

Agilent Technologies N3307A Manuale del proprietario

Agilent Technologies

Agilent Technologies 54751A Manuale utente

Agilent Technologies

Agilent Technologies N5532A Manuale

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente