Agilent Technologies LC Series Manuale utente

1290 Infinity II Valve Drive and Valve Heads

Agilent InfinityLab LC Series

User Manual

1290 Infinity II Valve Drive and Valve Heads User Manual

Notices

Document Information

Document No: SD-29000412 Rev. C.00

Edition: 06/2021

No part of this manual may be repro-

duced in any form or by any means

(including electronic storage and retrieval

or translation into a foreign language)

without prior agreement and written con-

sent from Agilent Technologies, Inc. as

governed by United States and interna-

tional copyright laws.

Warranty

The material contained in this document

is provided “as is,” and is subject to being

changed, without notice, in future edi-

tions. Further, to the maximum extent

permitted by applicable law, Agilent dis-

claims all warranties, either express or

implied, with regard to this manual and

any information contained herein, includ-

ing but not limited to the implied warran-

ties of merchantability and fitness for a

particular purpose. Agilent shall not be lia-

ble for errors or for incidental or conse-

quential damages in connection with the

furnishing, use, or performance of this

document or of any information con-

tained herein. Should Agilent and the user

have a separate written agreement with

warranty terms covering the material in

this document that conflict with these

terms, the warranty terms in the separate

agreement shall control.

Technology Licenses

The hardware and/or software described

in this document are furnished under a

license and may be used or copied only in

accordance with the terms of such

license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only

those rights customarily provided to end

user customers. Agilent provides this

customary commercial license in Soft-

ware and technical data pursuant to FAR

12.211 (Technical Data) and 12.212

(Computer Software) and, for the Depart-

ment of Defense, DFARS 252.227-7015

(Technical Data - Commercial Items) and

DFARS 227.7202-3 (Rights in Commer-

cial Computer Software or Computer

Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in damage to the product or loss

of important data. Do not proceed

beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARN-

ING notice until the indicated

conditions are fully understood

and met.

Agilent Technologies

Hewlett-Packard-Strasse 8

76337 Waldbronn, Germany

1290 Infinity II Valve Drive and Valve Heads User Manual 3

In This Guide…

This manual covers the following:

•Agilent InfinityLab LC Series 1290 Infinity II Valve Drive (G1170A)

•Agilent InfinityLab Quick Change Valves

1 Introduction to the Agilent 1290 Infinity II Valve Drive and InfinityLab LC

Series Valves

This chapter gives an introduction to the module, instrument overview and internal

connectors

2 Site Requirements and Specifications

This chapter provides information on environmental requirements, physical and

performance specifications.

3 Installing the Module

This chapter gives information about the installation of the valve drive and the

valve heads.

4UsingtheModule

This chapter provides information on how to use the module.

5Troubleshootingand Diagnostics

This chapter gives an overview about the troubleshooting and diagnostic features

and the different user interfaces.

6 Error Information

This chapter describes the meaning of error messages, and provides information

on probable causes and suggested actions how to recover from error conditions.

1290 Infinity II Valve Drive and Valve Heads User Manual 4

7 Maintenance

This chapter gives you an overview and instructions about the possible

maintenance and repair procedures that can be performed by the user.

8 Parts and Materials

This chapter provides information on parts and materials.

9 Identifying Cables

This chapter provides information on cables used with the Agilent Infinity and

Infinity II Series modules.

10 Hardware Information

This chapter describes the module in more detail on hardware and electronics.

11 Appendix

This chapter provides additional information on safety, legal and web.

1290 Infinity II Valve Drive and Valve Heads User Manual 5

Contents

1 Introduction to the Agilent 1290 Infinity II Valve Drive and InfinityLab LC

Series Valves 8

Overview of the Valve Drive 9

Overview of the Agilent InfinityLab Quick Change Valves 13

Typical Applications 15

Leak and Waste Handling 21

2 Site Requirements and Specifications 26

Site Requirements 27

Physical Specifications 30

Performance Specifications 31

3 Installing the Module 32

Unpacking the Module 33

Installing the Valve Drive 35

Installing the Valve Heads 47

4UsingtheModule54

Turn on/off 55

Status Indicators 57

Hints for Successful Use 58

Solvent Information 59

Software Configuration 66

Agilent Local Control Modules 70

5Troubleshootingand Diagnostics 71

Overview of the Module’s Indicators and Test Functions 72

1290 Infinity II Valve Drive and Valve Heads User Manual 6

6 Error Information 73

What Are Error Messages 74

General Error Messages 75

Module Specific Error Messages 81

7 Maintenance 84

Introduction to Maintenance 85

Cautions and Warnings 86

Overview of Maintenance 88

Cleaning the Module 89

Replacing Parts of the Valve Head 90

Replacing the Fuses of the Infinity II Valve Drive 92

Replacing Valve Heads 94

Replacing the Module Firmware 99

8 Parts and Materials 100

Valve Drive Parts 101

Valve Options Overview 103

Accessory Kit 105

9 Identifying Cables 106

Cable Overview 107

Analog Cables 109

Remote Cables 111

CAN/LAN Cables 114

RS-232 Cables 115

USB 116

1290 Infinity II Valve Drive and Valve Heads User Manual 7

10 Hardware Information 117

Firmware Description 118

Electrical Connections 121

Interfaces 124

Config Switch Settings of the Infinity II Valve Drive 132

11 Appendix 134

General Safety Information 135

Waste Electrical and Electronic Equipment (WEEE) Directive 141

Radio Interference 142

Sound Emission 143

Solvent Information 144

Agilent Technologies on Internet 145

1290 Infinity II Valve Drive and Valve Heads User Manual 8

1 Introduction to the Agilent 1290 Infinity II

Valve Drive and InfinityLab LC Series Valves

Overview of the Valve Drive 9

Overview of the Agilent InfinityLab Quick Change Valves 13

Typical Applications 15

Dual and Multiple Column Selection 15

Sample Enrichment and Sample Cleanup 17

Alternating Column Regeneration 19

Solvent Selection 20

Leak and Waste Handling 21

Leak Sensor 25

Waste Concept 25

This chapter gives an introduction to the module, instrument overview and

internal connectors

1290 Infinity II Valve Drive and Valve Heads User Manual 9

1 Introduction to the Agilent 1290 Infinity II Valve Drive and InfinityLab LC Series

Valves

Overview of the Valve Drive

The Agilent 1290 Infinity II Valve Drive (G1170A) is a part of the InfinityLab LC

Series. This is a valve drive delivered without a specific valve head. To be used in

a HPLC system it is required to add a valve head to this device. It is compatible

with all currently available Agilent InfinityLab Quick Change Valves (see Table 1

on page 13)

It includes the following features:

•Built-in power supply

•Leak handling with a leak pane and a leak sensor underneath the valve head

•User exchangeable valve heads (Agilent InfinityLab Quick Change Valves)

•Valve type and pressure detected by RFID tag

•Flexible mounting bracket, for left- or right-side mounting on LC stacks or at

the Agilent Column Organizer (G1383A).

1 Introduction to the Agilent 1290 Infinity II Valve Drive and InfinityLab LC Series

Valves

Overview of the Valve Drive

1290 Infinity II Valve Drive and Valve Heads User Manual 10

Figure 1 Mounting Examples for 1290 Infinity II Valve Drive

Altri manuali per LC Series

Indice

Altri manuali Agilent Technologies Unità di controllo

Agilent Technologies

Agilent Technologies 70341A Manuale utente

Agilent Technologies

Agilent Technologies 4890 Manuale utente

Agilent Technologies

Agilent Technologies G1360A Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies VXI 75000 C Series Manuale utente

Agilent Technologies

Agilent Technologies 83481A Manuale utente

Agilent Technologies

Agilent Technologies 83486A Manuale utente

Agilent Technologies

Agilent Technologies 355C Manuale di servizio

Agilent Technologies

Agilent Technologies 8494A Manuale di servizio

Agilent Technologies

Agilent Technologies E2259A Istruzioni operative

Agilent Technologies

Agilent Technologies 81618A Manuale utente

Agilent Technologies

Agilent Technologies 54751A Manuale utente

Agilent Technologies

Agilent Technologies Turbo-V Manuale utente

Agilent Technologies

Agilent Technologies G3375A Manuale di istruzioni

Agilent Technologies

Agilent Technologies 83487A Manuale utente

Agilent Technologies

Agilent Technologies N5532A Manuale

Agilent Technologies

Agilent Technologies 83400 Series Manuale utente

Agilent Technologies

Agilent Technologies 34946A Manuale utente

Agilent Technologies

Agilent Technologies 81570A Manuale utente

Agilent Technologies

Agilent Technologies 81650A Manuale utente

Agilent Technologies

Agilent Technologies 6850 GC Manuale utente

Agilent Technologies

Agilent Technologies E8361AU-016 Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies HP E1355A Manuale utente

Agilent Technologies

Agilent Technologies 75000 Series C Manuale utente

Agilent Technologies

Agilent Technologies N3307A Manuale del proprietario

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente