Agilent Technologies 1290 Infinity II Manuale utente
Agilent Technologies
Agilent InfinityLab LC Series
1290 Infinity II
MS Flow Modulator
User Manual
MS Flow Modulator User Manual
Notices
© Agilent Technologies, Inc. 2017
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from Agi-
lent Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
G7170-90000
Edition
09/2017
Printed in Germany
Agilent Technologies
Hewlett-Packard-Strasse 8
76337 Waldbronn
Warranty
The material contained in this docu-
ment is provided “as is,” and is sub-
ject to being changed, without notice,
in future editions. Further, to the max-
imum extent permitted by applicable
law, Agilent disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequential damages in connection
with the furnishing, use, or perfor-
mance of this document or of any
information contained herein. Should
Agilent and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of
a U.S. Government prime contract or sub-
contract, Software is delivered and licensed
as “Commercial computer software” as
defined in DFAR 252.227-7014 (June 1995),
or as a “commercial item” as defined in
FAR 2.101(a) or as “Restricted computer
software” as defined in FAR 52.227-19
(June 1987) or any equivalent agency regu-
lation or contract clause. Use, duplication
or disclosure of Software is subject to Agi-
lent Technologies’ standard commercial
license terms, and non-DOD Departments
and Agencies of the U.S. Government will
receive no greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will receive
no greater than Limited Rights as defined in
FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could
result in damage to the product
or loss of important data. Do not
proceed beyond a CAUTION
notice until the indicated condi-
tions are fully understood and
met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice,
or the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indi-
cated conditions are fully
understood and met.
MS Flow Modulator User Manual 3
In This Guide…
In This Guide…
This manual covers the Agilent InfinityLab LC Series 1290 Infinity II MS Flow
Modulator (G7170B)
1Introduction
This chapter gives an introduction to the module.
2 Site Requirements and Specifications
This chapter provides information on environmental requirements, physical
and performance specifications.
3 Installing the Module
This chapter gives information about the installation of the valve drive and the
valve heads.
4 Using the Module
This chapter provides information on how to use the module.
5 Troubleshooting and Diagnostics
Overview about the troubleshooting and diagnostic features.
6 Error Information
This chapter describes the meaning of error messages, and provides
information on probable causes and suggested actions how to recover from
error conditions.
7 Maintenance
This chapter describes the maintenance of the module.
8 Parts and Materials
This chapter provides information on parts for maintenance.
4 MS Flow Modulator User Manual
In This Guide…
9 Identifying Cables
This chapter provides information on cables used with the modules.
10 Hardware Information
This chapter describes the module in more detail on hardware and electronics.
11 Appendix
This chapter provides addition information on safety, legal and web.
MS Flow Modulator User Manual 5
Contents
Contents
1Introduction 7
1290 Infinity II MS Flow Modulator 8
Features (G7170B) 9
Leak and Waste (G7170B) 10
Operating Principle 11
2 Site Requirements and Specifications 13
Site Requirements 14
Physical Specifications 17
Performance Specifications 18
3 Installing the Module 19
Unpacking the Module 20
Installation of the MS Flow Modulator 21
4 Using the Module 31
Overview 32
Solvent Information 33
Status Indicator 40
Leak and Waste Handling 41
Configure the Flow Modulator 43
5 Troubleshooting and Diagnostics 47
User Interfaces 48
Agilent Lab Advisor Software 49
6 Error Information 51
What Are Error Messages 52
General Error Messages 53
Module Specific Error Messages 58
6 MS Flow Modulator User Manual
Contents
7 Maintenance 61
Introduction to Maintenance 62
Warnings and Cautions 63
Cleaning the Module 64
Replacing the Fuses of the Infinity Valve Drive 65
Replace Rotor and Stator 67
Replace Valve Heads 70
Replacing the Module Firmware 74
8 Parts and Materials 77
Accessory Kit for the Flow Modulator 78
Optional Parts 80
9 Identifying Cables 81
Cable Overview 82
Analog Cables 84
Remote Cables 86
CAN/LAN Cables 90
Agilent Module to PC 91
USB 92
10 Hardware Information 93
Electrical Connections 94
Interfaces 96
Config Switch Settings of the Infinity Valve Drive 102
11 Appendix 105
General Safety Information 106
Waste Electrical and Electronic Equipment (WEEE) Directive (2002-96-EC) 113
Radio Interference 114
Sound Emission 115
Agilent Technologies on Internet 116
8 MS Flow Modulator User Manual
1
Introduction
1290 Infinity II MS Flow Modulator
1290 Infinity II MS Flow Modulator
Based on technology in our InfinityLab Quick Change valves, the 1290 Infinity
II MS Flow Modulator facilitates efficient flow control for mass-based fraction
collection on all InfinityLab LC Purification Solutions. The Flow Modulator is
a compact module suitable for flow rates up to 100 mL/min and supports split
ratios between 40:1 and 400000:1 with split frequencies up to 2 Hz.
Figure 1 Overview of the MS flow modulator
6WDWXVLQGLFDWRU
9DOYH
MS Flow Modulator User Manual 9
Introduction
1
Features (G7170B)
Features (G7170B)
Purification efficiency
•Supports wide range of split modes from 40:1 up to 400000:1 depending on
flow rate
•Enables split frequencies of up to 2 Hz
•Handles flow rates up to 100 mL/min
Instrument efficiency
•Integrates into any InfinityLab LC Purification Solution through CAN-bus
technology
•Supported by Agilent drivers – no additional software or macros required
Laboratory efficiency
•Compact design and easy connection to any InfinityLab LC Purification
Solution saves bench space
•Compatible with all InfinityLab LC Purification Solutions, enabling upgrade
to mass-based fraction collection when needs demand
•Integrates seamlessly in OpenLAB CDS ChemStation for familiar and
reliable operation
10 MS Flow Modulator User Manual
1
Introduction
Leak and Waste (G7170B)
Leak and Waste (G7170B)
1
NOTE
This example shows the leak and waste concept of the module, if installed to a leak tray and attached to
another module.
Alternatively, the module can be installed and integrated to the leak and waste concept of 1290 Infinity II
Preparative Column Compartment.
/HDNWUD\
7XEHWRZDVWH
Altri manuali per 1290 Infinity II
5
Indice
Altri manuali Agilent Technologies Attrezzature da laboratorio
Agilent Technologies
Agilent Technologies 850-DS Manuale utente
Agilent Technologies
Agilent Technologies Agilent 1260 Infinity Manuale utente
Agilent Technologies
Agilent Technologies 1290 Infinity II 2D-LC Solution Manuale utente
Agilent Technologies
Agilent Technologies 280-DS MQS Manuale utente
Agilent Technologies
Agilent Technologies 7693A Manuale utente
Agilent Technologies
Agilent Technologies 7890 Series Manuale utente
Agilent Technologies
Agilent Technologies 6890 Series Istruzioni operative
Agilent Technologies
Agilent Technologies N2727A Manuale utente
Agilent Technologies
Agilent Technologies agilent 7683B Istruzioni per l'installazione e il funzionamento
Agilent Technologies
Agilent Technologies 1200 series Manuale utente
Agilent Technologies
Agilent Technologies Enhancer Cell Manuale utente
Agilent Technologies
Agilent Technologies 1260 Infinity II Manuale utente
Agilent Technologies
Agilent Technologies 5100 ICP-OES Istruzioni operative
Agilent Technologies
Agilent Technologies B1500A Manuale utente
Agilent Technologies
Agilent Technologies 7820A Istruzioni per il montaggio
Agilent Technologies
Agilent Technologies 1260 Infinity Manuale utente
Agilent Technologies
Agilent Technologies G2570A GC/MSD Manuale del proprietario
Agilent Technologies
Agilent Technologies Bravo Guida all'installazione
Agilent Technologies
Agilent Technologies ZORBAX Series Manuale utente
Agilent Technologies
Agilent Technologies 4100 Istruzioni operative
