Agilent Technologies DNA 7500 Manuale
Agilent Technologies
Agilent
DNA 7500 and
DNA 12000
Kit Guide
Notices
© Agilent Technologies, Inc. 2000-2015,
2016
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from Agi-
lent Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
G2938-90024 Rev. C
Edition
12/2016
Printed in Germany
Agilent Technologies
Hewlett-Packard-Strasse 8
76337 Waldbronn
Warranty
The material contained in this docu-
ment is provided “as is,” and is sub-
ject to being changed, without notice,
in future editions. Further, to the max-
imum extent permitted by applicable
law, Agilent disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequential damages in connection
with the furnishing, use, or perfor-
mance of this document or of any
information contained herein. Should
Agilent and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of
a U.S. Government prime contract or sub-
contract, Software is delivered and licensed
as “Commercial computer software” as
defined in DFAR 252.227-7014 (June 1995),
or as a “commercial item” as defined in
FAR 2.101(a) or as “Restricted computer
software” as defined in FAR 52.227-19
(June 1987) or any equivalent agency regu-
lation or contract clause. Use, duplication
or disclosure of Software is subject to Agi-
lent Technologies’ standard commercial
license terms, and non-DOD Departments
and Agencies of the U.S. Government will
receive no greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will receive
no greater than Limited Rights as defined in
FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could
result in damage to the product
or loss of important data. Do not
proceed beyond a CAUTION
notice until the indicated condi-
tions are fully understood and
met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice,
or the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indi-
cated conditions are fully
understood and met.
For Research Use Only
Not for use in diagnostic procedures
3
Contents
Contents
1 Agilent DNA 7500 and DNA 12000 Kit 4
2 Equipment Required for a DNA 7500 and DNA 12000 Assay 6
3 Setting up the Assay Equipment and Bioanalyzer 7
Setting up the Chip Priming Station 8
Setting up the Bioanalyzer 9
Vortex Mixer 9
Starting the 2100 Expert Software 10
4 Essential Measurement Practices 11
5 Agilent DNA 7500 and DNA 12000 Assay Protocol 12
Preparing the Gel-Dye Mix 12
Loading the Gel-Dye Mix 14
Loading the Marker 15
Loading the Ladder and the Samples 16
Inserting a Chip in the Agilent 2100 Bioanalyzer 17
Starting the Chip Run 18
Cleaning Electrodes after a Chip Run 20
6 Checking Your Agilent DNA 7500 and DNA 12000 Assay Results 21
DNA 7500 and DNA 12000 Ladder Well Results 21
DNA 7500 and DNA 12000 Sample Well Results 23
4
Agilent Technologies
Agilent DNA 7500 and DNA 12000 Kit 1
Agilent DNA 7500 Kit (reorder number 5067-1506) Agilent DNA 12000 Kit (reorder number 5067-1508)
DNA Chips DNA Chips
25 DNA Chips 25 DNA Chips
1 Electrode Cleaner 1 Electrode Cleaner
DNA 7500 Reagents (reorder number 5067-1507)&
Supplies
DNA 12000 Reagents (reorder number 6067-1509)&
Supplies
(yellow) DNA 7500 Ladder (yellow) DNA 12000 Ladder
(green) DNA 7500 Markers (2 vials) (green) DNA 12000 Markers (2 vials)
(blue) DNA Dye Concentrate
1
(1 vial) (blue) DNA Dye Concentrate
1
(1 vial)
(red) DNA Gel Matrix (3 vials) (red) DNA Gel Matrix (3 vials)
3 Spin Filters 3 Spin Filters
Syringe Kit Syringe Kit
1 Syringe 1 Syringe
1
“This product is provided under a license by Life Technologies Corporation to Agilent Technologies. The purchase of this
product conveys to the buyer the non-transferable right to use the purchased amount of the product and components of
the product only as described in accompanying product literature. The sale of this product is expressly conditioned on the
buyer not using the product or its components (1) in manufacturing; (2) to provide a service, information, or data to an un-
affiliated third party for payment; (3) for therapeutic, diagnostic or prophylactic purposes; (4) to resell, sell or otherwise
transfer this product or its components to any third party, or use for any use other than use in the subfields of research
and development, quality control, forensics, environmental analysis, biodefense or food safety testing. For information on
purchasing a license to this product for purposes other than described above contact Life Technologies Corporation,
Cell Analysis Business Unit, Business Development, 29851 Willow Creek Road, Eugene, OR 97402, Tel: (541) 465-8300.
Fax: (541) 335-0354.”
5
Agilent DNA 7500 and DNA 12000 Kit
1
Table 1 Physical Specifications
Type Specification
Analysis time 30 minutes
Samples per chip 12
Sample volume 1 µL
Kit stability 4 months (see box for storage temperatures)
Kit size 12 samples/chip = 300 samples/kit
Table 2 Analytical Specifications
Type Agilent DNA 7500 Agilent DNA 12000
Sizing range 100 – 7500 bp 100 – 12000 bp
Sizing resolution 100 – 1000 bp: 5 %
1000 – 7500 bp: 15 %
100 – 1000 bp: 5 %
100 – 12000 bp: 15 %
Sizing accuracy ± 10 % ± 15 %
Sizing reproducability 5 % CV 5 % CV
Quantitation
accuracy
1
1
Determined using the respective DNA ladder as sample
20 % 25 %
Quantitation
reproducibility
1
100 – 1000 bp: 10 % CV
1000 – 7500 bp: 5 % CV
100 – 1000 bp: 15 % CV
1000 – 12000 bp: 10 % CV
Quantitative range
1
0.5 – 50 ng/µl 0.5 – 50 ng/µl
Maximum salt 250 mM for KCl
15 mM for MgCl
2
250 mM NaCl
250 mM for KCl
15 mM for MgCl
2
250 mM NaCl
6
Agilent Technologies
Equipment Required for a DNA 7500 and
DNA 12000 Assay 2
Equipment Supplied with the Agilent 2100 Bioanalyzer
•Chip priming station (reorder number 5065-4401)
•IKA vortex mixer
Additional Material Required (Not Supplied)
•Pipettes (10 μl, 100 μl and 1000 μl) with compatible tips
•Microcentrifuge tubes:
•0.5 ml for sample preparation
•1.5 ml for gel-dye mix preparation
•Microcentrifuge
Check the Agilent Lab-on-a-Chip webpage for details on assays:
www.agilent.com/chem/labonachip.
7
Agilent Technologies
Setting up the Assay Equipment and
Bioanalyzer 3
Before beginning the chip preparation protocol, ensure that the chip priming
station and the bioanalyzer are set up and ready to use.
You have to
•replace the syringe at the chip priming station with each new kit
•adjust the base plate of the chip priming station
•adjust the syringe clip at the chip priming station
•set up the vortex mixer
•finally, make sure that you start the software before you load the chip.
NOTE
The DNA 7500 and DNA 12000 assay is a high sensitivity assay. Please read this guide
carefully and follow all instructions to guarantee satisfactory results.
8
3
Setting up the Assay Equipment and Bioanalyzer
Setting up the Chip Priming Station
Setting up the Chip Priming Station
1Replace the syringe:
aUnscrew the old syringe from the lid of the chip
priming station.
bRelease the old syringe from the clip. Discard the old
syringe.
cRemove the plastic cap of the new syringe and insert it
into the clip.
dSlide it into the hole of the luer lock adapter and screw
it tightly to the chip priming station.
2Adjust the base plate:
aOpen the chip priming station by pulling the latch.
bUsing a screwdriver, open the screw at the underside
of the base plate.
cLift the base plate and insert it again in position C.
Retighten the screw.
3Adjust the syringe clip:
aRelease the lever of the clip and slide it up to the top
position.
NOTE
Replace the syringe with each new reagent kit.
9
Setting up the Assay Equipment and Bioanalyzer
3
Setting up the Bioanalyzer
Setting up the Bioanalyzer
1Open the lid of the bioanalyzer and make sure that the electrode cartridge is
inserted in the instrument. If not, open the latch and insert the electrode
cartridge.
Figure 1 Electrode cartridge inserted in the instrument (graphic shows an
example).
2Remove any remaining chip.
Vortex Mixer
IKA - Model MS3
1To set up the vortex mixer, adjust the
speed knob to 2400 rpm.
10
3
Setting up the Assay Equipment and Bioanalyzer
Starting the 2100 Expert Software
Starting the 2100 Expert Software
To start the software:
1Go to your desktop and double-click the following icon.
The screen of the software appears in the Instrument context. The icon in the
upper part of the screen represents the current instrument-PC
communication status:
2If more than one instrument is connected to your PC, select the instrument
you want to use in the tree view.
Lid closed, no chip or chip
empty
Lid open
Dimmed icon: no
communication
Lid closed, chip inserted,
DNA or demo assay
selected
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Agilent Technologies Attrezzature da laboratorio
Agilent Technologies
Agilent Technologies 1260 Infinity II Manuale utente
Agilent Technologies
Agilent Technologies InfinityLab LC Series Manuale utente
Agilent Technologies
Agilent Technologies PlateLoc Manuale utente
Agilent Technologies
Agilent Technologies 1260 Infinity II Manuale utente
Agilent Technologies
Agilent Technologies PR02 Manuale utente
Agilent Technologies
Agilent Technologies Small RNA Kit Manuale utente
Agilent Technologies
Agilent Technologies G1701EA Manuale utente
Agilent Technologies
Agilent Technologies QuickSwap G3185B Manuale
Agilent Technologies
Agilent Technologies Cryogenic Manuale utente
Agilent Technologies
Agilent Technologies N2792A Manuale utente
Agilent Technologies
Agilent Technologies 7890A Manuale utente
Agilent Technologies
Agilent Technologies 8890 Manuale utente
Agilent Technologies
Agilent Technologies InfinityLab LC Series Manuale utente
Agilent Technologies
Agilent Technologies 1260 Infinity II Quaternary System Manuale utente
Agilent Technologies
Agilent Technologies 1200 series Manuale utente
Agilent Technologies
Agilent Technologies 1200 series Manuale utente
Agilent Technologies
Agilent Technologies 2200 TapeStation Manuale utente
Agilent Technologies
Agilent Technologies G2545A Manuale per l'uso e la cura
Agilent Technologies
Agilent Technologies 8860 Manuale utente
Agilent Technologies
Agilent Technologies Nano Indenter G200 Manuale utente
Agilent Technologies
Agilent Technologies 5100 ICP-OES Istruzioni operative
Agilent Technologies
Agilent Technologies 1220 Infinity II LC Manuale di installazione e funzionamento
Agilent Technologies
Agilent Technologies 6100 Series LC/MS Manuale utente
Agilent Technologies
Agilent Technologies 5975T LTM GC Manuale utente
