Agilent Technologies 83483A Manuale utente

FINAL TRIM SIZE : 7.5 in x 9.0 in

User's Guide

Agilent 83483A,4A,4B

and 54751A,2A,2B

Plug-In Modules

FINAL TRIM SIZE : 7.5 in x 9.0 in

Agilent part number: 83483-90010 and 54751-97011

Printed in US

AApril 2000

Notice

The information contained in this document is subject to change

without notice

.Agilent T

echnologies makes no warranty of any kind

with regard to this material, including but not limited to

,the implied

warranties of merchantability and tness for aparticular purpose

.Agilent

echnologies shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance

,or use

of this material.

Restricted Rights Legend.

Use

,duplication, or disclosure by the U

Government is subject to restrictions as set forth in subparagraph (c) (1) (ii)

of the Rights in T

echnical Data and Computer Software clause at DF

ARS

252.227-7013 for DOD agencies

,and subparagraphs (c) (1) and (c) (2) of the

Commercial Computer Software Restricted Rights clause at F

AR 52.227-19 for

other agencies



echnologies 2000

written permission is prohibited, except as allowed under the copyright laws

FINAL TRIM SIZE : 7.5 in x 9.0 in

Certication

Agilent Technologies certies that this product met its published specications

at the time of shipment from the factory

.Agilent T

echnologies further

certies that its calibration measurements are traceable to the United States

National Institute of Standards and T

echnology

,to the extent allowed by

the Institute's calibration facility, and to the calibration facilities of other

International Standards Organization members

iii

FINAL TRIM SIZE : 7.5 in x 9.0 in

arranty

This Agilent T

echnologies instrument product is warranted against defects in

material and workmanship for aperiod of one year from date of shipment.

During the warranty period, Agilent T

echnologies will, at its option, either

repair or replace products which prove to be defective

or warranty service or repair

,this product must be returned to aservice

facility designated by Agilent T

echnologies

.Buyer shall prepay shipping

charges to Agilent T

echnologies and Agilent T

echnologies shall pay shipping

charges to return the product to Buyer

.However

,Buyer shall pay all shipping

charges

, duties

,and taxes for products returned to Agilent T

echnologies from

another country

Agilent T

echnologies warrants that its software and rmware designated by

Agilent T

echnologies for use with an instrument will execute its programming

instructions when properly installed on that instrument. Agilent T

echnologies

does not warrant that the operation of the instrument, or software

,or

rmware will be uninterrupted or error-free

Limit

tion of W

arranty

The foregoing warranty shall not apply to defects resulting from improper

or inadequate maintenance by Buyer

,Buyer-supplied software or

interfacing, unauthorized modication or misuse

,operation outside of the

environmental specications for the product, or improper site preparation

or maintenance

NO OTHER W

ARRANTY IS EXPRESSED OR IMPLIED

GILENT

TECHNOLOGIES SPECIFICALL

YDISCLAIMS THE IMPLIED W

ARRANTIES

OF MERCHANT

ABILITY AND FITNESS FOR AP

ARTICULAR PURPOSE.

clusive Remedies

THE REMEDIES PRO

VIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE

REMEDIES

GILENT TECHNOLOGIES SHALL NOT BE LIABLE FOR

ANY DIRECT, INDIRECT

, SPECIAL, INCIDENT

AL, OR CONSEQUENTIAL

DAMAGES, WHETHER B

ASED ON CONTRA

, TORT

, OR ANY OTHER

LEGAL THEORY

FINAL TRIM SIZE : 7.5 in x 9.0 in

Assistance

Product maintenance agreements and other customer assistance agreements

are available for A

gilent T

echnologies products.

Sales and service oces

Agilent T

echnologies has sales and service oces located around the world

to provide complete support for Agilent T

echnologies products

oobtain

servicing information or to order replacement parts

,contact the nearest

Agilent T

echnologies Sales and Service Oce

.In any correspondence or

telephone conversation, refer to the instrument by its model number

,serial

number

,and option designation.

Before returning an instrument for service

,call the Agilent

Technologies Instrument Support Center at (800) 403-0801,

visit the Test and Measurement W

eb Sites by Country page at

http://www.tm.agilent.com/tmo/country/English/index.html, or call one of the

numbers listed below

FINAL TRIM SIZE : 7.5 in x 9.0 in

Agilent T

echnologies Service Numbers

Austria 01/25125-7171

Belgium 32-2-778.37.71

Brazil (11) 7297-8600

China 86 10 6261 3819

Denmark 45 99 12 88

Finland 358-10-855-2360

France 01.69.82.66.66

German

y0180/524-6330

India 080-34 35788

Italy +39 02 9212 2701

Ireland 01 615 8222

Japan (81)-426-56-7832

Korea 82/2-3770-0419

Mexico (5) 258-4826

Netherlands 020-547 6463

Norwa

y22 73 57 59

Russia +7-095-797-3930

Spain (34/91) 631 1213

Sweden 08-5064 8700

Switzerland (01) 735 7200

United Kingdom 01 344 366666

United States and Canada (800) 403-0801

FINAL TRIM SIZE : 7.5 in x 9.0 in

Declaration of Conformity

vii

FINAL TRIM SIZE : 7.5 in x 9.0 in

viii

FINAL TRIM SIZE : 7.5 in x 9.0 in

Safety Symbols

The following safety symbols are used throughout this manual. F

amiliarize

yourself with each of the symbols and its meaning before operating this

instrument.

CAUTION

The

caution

sign denotes a hazard to the instrument. It calls attention to a

procedure which, if not correctly performed or adhered to

,could result in

damage to or destruction of the instrument. Do not proceed beyond a

caution

sign until the indicated conditions are fully understood and met.

WARNING

The

warning

sign denotes alife-threatening hazard. It calls attention to a

procedure which, if not correctly performed or adhered to

,could result

in injury or loss of life

.Do not proceed beyond a

warning

sign until the

indicated conditions are fully understood and met.

Instruction

Manual

The

instruction manual

symbol. The product is marked with this symbol when it is necessary

for the user to refer to the instructions in the manual.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies 6813B Manuale utente

Agilent Technologies

Agilent Technologies 8757D Manuale utente

Agilent Technologies

Agilent Technologies 4263B Manuale utente

Agilent Technologies

Agilent Technologies U1211A Manuale utente

Agilent Technologies

Agilent Technologies HP 16500B Manuale utente

Agilent Technologies

Agilent Technologies 4155C Manuale utente

Agilent Technologies

Agilent Technologies 8719D Manuale utente

Agilent Technologies

Agilent Technologies E5900B Manuale utente

Agilent Technologies

Agilent Technologies N9010A Manuale utente

Agilent Technologies

Agilent Technologies 11867A? Manuale di servizio

Agilent Technologies

Agilent Technologies E5071C ENA Series Manuale utente

Agilent Technologies

Agilent Technologies 4294A Manuale utente

Agilent Technologies

Agilent Technologies 5062-8218 Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies E5052A Manuale utente

Agilent Technologies

Agilent Technologies 339B Guida all'installazione

Agilent Technologies

Agilent Technologies 8757D Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies E5080 Series Manuale utente

Agilent Technologies

Agilent Technologies N8262A P Series Manuale utente

Agilent Technologies

Agilent Technologies 8719ET Manuale

Agilent Technologies

Agilent Technologies OmniBER 718 SDH Manuale utente

Agilent Technologies

Agilent Technologies 8753ET Manuale utente

Agilent Technologies

Agilent Technologies 86038A Manuale utente

Agilent Technologies

Agilent Technologies Agilent 4396B Manuale utente

Agilent Technologies

Agilent Technologies 8712ET Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente