Agilent Technologies 8753ET Manuale utente

Agilent 8753ET/8753ES Network Analyzers

8753ET, 300 kHz to 3 or 6 GHz

8753ES, 30 kHz to 3 or 6 GHz

Configuration Guide

System configuration summary

The following summary lists the main components

required to form a basic measurement system.

In this configuration guide, the network analyzer

options for each model are listed first. General

product options that are available for both the

Agilent Technologies 753ET and 753ES are listed

next. Measurement accessories and peripherals

for both the 753ET and 753ES are also provided

in this configuration guide.

Transmission/reflection measurements

•Agilent 8753ET network analyzer

•Test-port return cable(s), 50 ohms

•Calibration kit for applicable connector type

Full S-parameter measurements

•Agilent 8753ES network analyzer

•Test-port return cables, 50 or 75 ohms

•Calibration kit for applicable connector type

System with user-selected test set

•Agilent 8753ES network analyzer

•Option 011 delete built-in test set

•S-parameter test set

•Test port return cables for selected test set

•Calibration kit for applicable connector type

Agilent 8753ET network analyzer

A standard 753ET covers 300 kHz to 3 GHz,

includes a built-in transmission/reflection test

set, and has two 50 ohm type-N female test ports.

Included with each instrument is a manual set

which includes an installation and quick start

guide, user’s guide, reference guide, programmer’s

guide, example programs CD-ROM, and a CD-ROM

containing the manual set. Instruments include

a 3-year return-to-Agilent service warranty.

Network analyzer options

•Option 002

harmonic measurement capability

Provides measurements of swept second and

third harmonic responses. Option 006 extends

harmonic measurement capability to 6 GHz.

•Option 004

step attenuator

Extends source output power range from

– 5 to +10 dBm.

•Option 006

6 GHz frequency extension

Provides source and receiver operation to 6 GHz.

•Option 010

time-domain capability

For viewing reflection and transmission

responses in time or distance domain.

•Option 1D5

high-stability frequency reference

Provides improved frequency accuracy over time

and with temperature variation.

Agilent 8753ES network analyzer

A standard 753ES covers 30 kHz to 3 GHz,

includes a built-in S-parameter test set, and has

two 7-mm test ports. Included with each instru-

ment is a manual set which includes an installa-

tion and quick start guide, user’s guide, reference

guide, programmer’s guide, example programs

CD-ROM, and a CD-ROM containing the manual

set. Instruments include a 3-year return-to-

Agilent service warranty.

Network analyzer options

•Option 002

harmonic measurement capability

For measuring swept second and third harmonic

responses. Option 006 extends harmonic meas-

urement capability to 6 GHz.

•Option 006

6 GHz frequency extension

Provides source and receiver operation to 6

GHz. Do not order Option 006 with Option 075.

•Option 010

time-domain capability

For viewing reflection and transmission

responses in time or distance domain.

•Option 011

deletes built-in test set

Removes test set components and allows direct

access to the source output power and the R, A,

and B receiver inputs via type-N female connec-

tors. Source start frequency is limited to 300

kHz for units that do not have Option 006. Do

not order Option 011 with Option 014 or 075.

•Option 014

configurable test set

Adds SMA connectors on front panel for access

to various source output and receiver input sig-

nal paths, including direct access to receivers.

When jumpers are in place, the analyzer per-

forms like a standard 753ES except that maxi-

mum source output power is reduced by 2 dB.

Do not order Option 014 with Option 011 or 075.

This option is not available as an upgrade kit, it

must be purchased at time of initial instrument

order.

•Option 075

75-ohm impedance

Replaces the standard 50 ohm test set with

a 75 ohm test set. Test ports are 75-ohm type-N

female connectors. Do not order Option 075

with Option 006, 011, or 014.

•Option 1D5

High-stability frequency reference

Provides improved frequency accuracy over time

and with temperature variation.

The following special options are available to cus-

tomize the 753ES for particular applications.

Please contact Agilent for a quote on these options,

to obtain information on expected instrument per-

formance, or to request other special configurations.

•Option H16

low noise floor

Adds switches that allow the port 2 coupler

to be reversed, so that the forward transmitted

signal travels along the through path in the

coupler instead of the coupled path, increasing

the forward dynamic range by about 12 dB while

decreasing the dynamic range in the reverse

direction by about 15 dB.

•Option H39

three-port test set

Test set has an added coupler and switching

to provide three 50-ohm type-N female test

ports for measuring all nine S-parameters of

a three-port device.

•Option H68

6.8 GHz operation

Extends operation to 6. GHz. Performance

above 6 GHz is not specified (typical only).

•Option H85

high-power test set

Provides jumpers to allow the user to add an

external power amplifier to provide up to 20

watts (+43 dBm) of power at the test ports, and

high-power attenuators or isolators for higher

input power handling. The standard solid-state

transfer switch is replaced by a mechanical

transfer switch to handle higher output power,

and step attenuators are added between the

couplers and samplers to prevent receiver over-

load. Test ports are 3.5 mm, and the start

frequency of this test set is 50 MHz.

General product options

The following options are available for both the

Agilent 753ET and 753ES.

Rack mount options

•Option 1CM

rack mount kit without handles

•Option 1CP

rack mount kit with handles

Documentation options

•Option 0B0

deletes manual set

•Option 0B1

adds extra manual set

•Option 0BW

adds assembly-level service manual

This option provides a service manual for all

analyzers except an 753ES with Option 011.

•Option 911

adds assembly-level service manual

For 753ES Option 011.

The following language options provide

a translated user’s guide.

Part number

Option AB0 Traditional Chinese 5967- 513

(Taiwan) manual

Option AB1 Korean manual 5967- 514

Option AB2 Simplified Chinese 5967- 512

(PRC) manual

Option ABD German manual 5967- 516

Option ABF French manual 5967- 517

Option ABJ Japanese manual 5967- 511

Certification options

•Option UK6

Commercial calibration certificate with test data

Service and support options

•W01 converts three year return-to-Agilent

service warranty to a one year on-site service

warranty where available.

•W32 adds three years of return-to-Agilent

calibration.

•W34 adds three years of return-to-Agilent

standards-compliant calibration.

•W52 adds five years of return-to-Agilent

calibration.

•W54 adds five years of return-to-Agilent

standards-compliant calibration.

Measurement accessories

Accessories are available in these connector

types: 3.5 mm, 7 mm, 50-ohm type-N, 7-16, 75-ohm

type-N, and type-F. A standard 753ES or one

equipped with Option 075 includes a built-in

S-parameter test set. A calibration kit and test-

port cables should be added for a complete meas-

urement system. For an 753ES Option 011 net-

work analyzer, you also need to add a test set

or power splitter and bridge.

Test-port cables are used to connect to the device

under test. Calibration kits include standards,

such as open/short circuits and loads, which are

measured by the network analyzer for increased

measurement accuracy. Electronic calibration

(ECal) modules are used with the ECal interface

kit to provide automated calibration (in place of

a calibration kit). A verification kit is used in

conjunction with a calibration kit to verify system

performance.

50-ohm device measurements

Test-port cables

•11857D

50-ohm 7-mm test-port return cables

A pair of phase-matched 610-mm (24 in) cables,

for use with the standard 753ES network ana-

lyzer or the 5046A and 5047A test sets.

•Option B24

Deletes phase-match requirement.

•11851B

50-ohm type-N RF cable set

For systems based on an 753ES Option 011.

Includes three phase-matched 610-mm (24 in)

cables and one 60-mm (34 in) cable. Used with

Agilent 11 50C and 11667A power splitters.

•Option B24

Deletes phase-match requirement.

•Agilent part number 8120-5639

50-ohm type-N male to type-N male test-port cable

For use with the 753ET.

Calibration kits

Choose a kit for each connector type to be used.

•85031B

7-mm calibration kit

Contains fixed loads, and open/short circuit.

•85032B

50-ohm type-N calibration kit

Contains fixed loads, open and short circuits,

and 7-mm to type-N adapters for both connector

sexes for use with 7-mm test-port cables.

•Option 001

deletes 7-mm to type-N adapters

These adapters are not needed when this kit

is used exclusively with an 753ET system.

•85033D

3.5-mm calibration kit

Contains fixed loads, one-piece open and short

circuits, and 7-mm to 3.5-mm adapters for both

connector sexes for use with 7-mm test-port

cables.

•Option 001

deletes 7-mm to 3.5-mm adapters

These adapters are not needed when this kit

is used exclusively with an 753ET system.

•Option 002

replaces 7-mm to 3.5-mm adapters with type-N

to 3.5-mm adapters

This option is recommended when the cali-

bration kit is used with the 753ET.

•85038A

7-16 calibration kit

Contains fixed loads, opens, and short circuits

in both connector sexes. Adapters not included

(see the “Adapters” section later in this guide

for information about the Agilent 11906 series

of 7-16 adapter kits).

•85038F

7-16 calibration kit (female standards)

Contains fixed load, open, and short circuit with

7-16 female connectors and a 7-16 (f) to 7-16 (f)

adapter. Other adapters not included; see the

“Adapters” section on the next page for informa-

tion about the 11906 series of 7-16 adapter kits.

•85038M

7-16 calibration kit (male standards)

Contains fixed load, open, and short circuit with

7-16 male connectors and a 7-16 (m) to 7-16 (m)

adapter. Other adapters not included; see the

“Adapters” section on the next page for informa-

tion about the 11906 series of 7-16 adapter kits.

RF electronic calibration modules

This product family provides electronic calibration

(ECal) capability. With ECal, the usual calibration

kit standards are replaced by one solid-state cali-

bration module that can be programmed by the

analyzer’s internal firmware to present many dif-

ferent impedances to the test ports. A full two-port

calibration can be done with a single connection

in a few minutes, with reduced errors and wear

on connectors.

•85097B

VNA interface kit and software

Contains interface module for connecting an

ECal module to an 753E, 753ET and 753ES

analyzer.

•85091C

7-mm RF ECal module

•85092C

50-ohm type-N RF ECal module

•Option M0F

Module with type-N(m) and type-N(f)

connectors.

•Option 00F

Module with two type-N female connectors.

•Option 00M

Module with two type-N male connectors.

•Option 00A

Adds type-N(m) to type-N(m) adapter and

type-N(f) to type-N(f) adapter.

•85093C

3.5-mm RF ECal module

•Option M0F

Module with 3.5-mm(m) and 3.5-mm(f)

connectors.

•Option 00F

Module with two 3.5-mm female connectors.

•Option 00M

Module with two 3.5-mm male connectors.

•Option 00A

Adds 3.5-mm(f) to 3.5-mm(f) adapter and

3.5-mm(m) to 3.5-mm(m) adapter.

•85098C

7-16 RF ECal module

•Option M0F

Module with 7-16(m) and 7-16(f) connectors.

•Option 00F

Module with two 7-16 female connectors.

•Option 00M

Module with two 7-16 male connectors.

•Option 00A

Adds 7-16(m) to 7-16(m) adapter and 7-16(f)

to 7-16(f) adapter.

Verification kit

•85029B

7-mm verification kit

Includes attenuators and mismatch attenuator

with data on a 3.5-inch disk for use in confirm-

ing system measurement performance after a

calibration has been performed, traceable to

national standards. Test procedure is provided

in the service manual. For use with a standard

753ES, or with systems including an 753ES

Option 011 and an 5046A, or 5047A test set.

This verification kit may also be used with an

753ET with the addition of two type-N(m) to

7-mm adapters. The 5031B 7-mm calibration kit

and 11 57D test-port cables are also required.

Test sets (for use with 8753ES Option 011)

•85046A

50-ohm S-parameter test set

300 kHz to 3 GHz. Requires the 11 57D 7-mm

test-port return cables for two-port device

measurements. Includes a test set interconnect

cable and four RF cables to connect to the

753ES Option 011.

•Option 913

Rack-mount kit, part number 5062-4069.

•85047A

50-ohm S-parameter test set

300 kHz to 6 GHz. Requires the 11 57D 7-mm

test-port return cables for two-port device

measurements. Includes a test set interconnect

cable and four RF cables to connect to the

753ES Option 011.

•Option 913

Rack-mount kit, Agilent part number

5062-4069.

•11850C

50-ohm type-N three-way power splitter

300 kHz to 3 GHz. Requires the Agilent 11 51B

RF cable kit.

•11667A

50-ohm type-N two-way power splitter

DC to 1 GHz. Requires the Agilent 11 51B

RF cable kit.

•86205A

50-ohm RF bridge 300 kHz to 6 GHz

•86207A

75-ohm RF bridge 300 kHz to 3 GHz

Adapters

•11525A

7-mm to 50-ohm type-N (male) adapter

•11853A

50-ohm type-N accessory kit

Contains type-N(m) to type-N(m) adapters,

type-N(f) to type-N(f) adapters, and type-N male

and female shorts.

•11854A

50-ohm BNC accessory kit

Contains type-N to BNC adapters for both

connector sexes and a BNC male short.

•11906A

7-16 to 7-16 adapter kit

Contains one 7-16(m) to 7-16(m) adapter, one

7-16(f) to 7-16(f) adapter, and two 7-16(m) to

7-16(f) adapters.

•11906B

7-16 to 50-ohm type-N adapter kit

Contains adapters for type-N(m) to 7-16(m),

type-N(m) to 7-16(f), type-N(f) to 7-16(m), and

type-N(f) to 7-16(f).

•11906C

7-16 to 7-mm adapter kit

Contains two 7-mm to 7-16(m) adapters and two

7-mm to 7-16(f) adapters.

•11906D

7-16 to 3.5-mm adapter kit

Contains adapters for 3.5-mm(m) to 7-16(m),

3.5-mm(m) to 7-16(f), 3.5-mm(f) to 7-16(m), and

3.5-mm(f) to 7-16(f) adapters.

75-ohm device measurements

Test-port cables

•11857B

75-ohm type-N test-port cables

A pair of phase-matched 610 mm (24 in) cables,

for use with the 753ES Option 075 or the

5046B S-parameter test set.

•Option B24

Deletes phase-match requirement.

•11851B

50-ohm type-N RF cable kit

For systems based on an 753ES Option 011.

Includes three phase-matched 610-mm (24 in)

cables and one 60-mm (34 in) cable. Used with

the 11 50D power splitter.

•Option B24

Deletes phase-match requirement.

•11857F

75-ohm type-F cables

Includes one 75-ohm type-N(m) to type-F(m)

cable, Agilent part number 120- 396, and one

type-N(m) to type-F(f), part number 120- 397.

Calibration kits

•85036B

75-ohm type-N calibration kit

Contains 75-ohm fixed loads, open/short

circuits, and 50-ohm type-N to 75-ohm type-N

adapters in both sexes.

•85039B

75-ohm type-F calibration kit

Includes 75-ohm male/female open, short, and

load standards and precision adapters N(f) to

F(m), N(m) to F(f), F(m) to F(m) and F(f) to F(f).

•Option 00M

male standards kit

Includes male open, short, and load standards

and precision F(m) to F(m) adapter.

•Option 00F

female standards kit

Includes female open, short, and load stan-

dards and precision F(f) to F(f) adapter.

RF electronic calibration modules

This product family provides electronic calibration

(ECal) capability. With ECal, the usual calibration

kit standards are replaced by one solid-state cali-

bration module that can be programmed by the

analyzer’s internal firmware to present many dif-

ferent impedances to the test ports. A full two-port

calibration can be done with a single connection in

a few minutes, with reduced errors and wear on

connectors.

•85097B

VNA interface kit and software

Contains interface module for connecting an

ECal module to an 753E, 753ET and 753ES

analyzer.

•85096C

75-ohm type-N RF ECal module

•Option M0F

Module with 75-ohm type-N(m) and type-N(f)

connectors.

•Option 00F

Module with two type-N female connectors.

•Option 00M

Module with two type-N male connectors.

•Option 00A

Adds type-N(m) to type-N(m) adapter and

type-N(f) to type-N(f) adapter.

•85099C

75-ohm type-F RF ECal module

•Option M0F

Module with type-F(m) and type-F(f)

connectors.

•Option 00F

Module with two type-F female connectors.

•Option 00M

Module with two type-F male connectors.

•Option 00A

Adds type-F(m) to type-F(m) adapter and

type-F(f) to type-F(f) adapter.

Test sets (for use with 8753ES Option 011)

•85046B

75-ohm S-parameter test set

300 kHz to 2 GHz. Requires the 11 57B 75-ohm

test-port return cables. Includes a test set inter-

connect cable and four RF cables to connect to

the 753ES Option 011.

•Option 913

Rack-mount kit, Agilent part number

5062-4069.

•11850D

75-ohm type-N three-way power splitter

300 kHz to 2 GHz. Includes three 11 52B 50-

to 75-ohm minimum loss pads for use with the

753ES Option 011 (50 ohms). Requires the

11 51B RF cable kit.

Minimum loss pads and adapters

•11852B

50- to 75-ohm minimum loss pad (300 kHz to 3 GHz)

Adapts from 50-ohm type-N female to 75-ohm

type-N male. Nominal insertion loss is 5.7 dB.

•Option 004

Provides 50-ohm type-N male and 75-ohm

type-N female connectors.

•11855A

75-ohm type-N accessory kit

Contains 75-ohm type-N male to type-N male

adapters, type-N female to type-N female

adapters, type-N male and female shorts, and

type-N male termination.

•11856A

75-ohm BNC accessory kit

Contains 75-ohm type-N to 75-ohm BNC

adapters for both connector sexes, a BNC male

short and BNC male termination.

Test configuration accessories

RF limiter

Externally attaches to one or both test ports of

the analyzer. Provides protection against potential

high-power transients from external devices.

•11930A

7-mm RF limiter, DC to 6 GHz,

max power +2 dBm typical

•11930B

50-ohm type-N RF limiter, 5 MHz to 6 GHz,

max power +2 dBm typical

Probe

•85024A

high-frequency probe

Provides high-impedance in-circuit test

capability, from 300 kHz to 3 GHz.

Amplifier

•8347A RF

power amplifier

Used to set leveled output power or increase

system dynamic range, from 100 kHz to 3 GHz.

Power meters

For more accurate control of leveled test-port

power. Requires an 4 0 series power sensor

and a GPIB cable for connection to the 753ET

or 753ES.

•E4418B

single-channel power meter

•E4419B

dual-channel power meter

Altri manuali per 8753ET

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies E4991A Manuale utente

Agilent Technologies

Agilent Technologies UHV-24 Manuale utente

Agilent Technologies

Agilent Technologies MXA N9020A Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies 8720E Series Manuale utente

Agilent Technologies

Agilent Technologies 6813B Manuale utente

Agilent Technologies

Agilent Technologies U1701A Manuale utente

Agilent Technologies

Agilent Technologies 1156A Manuale utente

Agilent Technologies

Agilent Technologies E8362A PNA Series Guida rapida

Agilent Technologies

Agilent Technologies PNA Series Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies N2771A Manuale utente

Agilent Technologies

Agilent Technologies J2126A Manuale utente

Agilent Technologies

Agilent Technologies 42941A Manuale operativo

Agilent Technologies

Agilent Technologies 10400B Series Manuale utente

Agilent Technologies

Agilent Technologies N5242A Manuale utente

Agilent Technologies

Agilent Technologies E4417A Manuale utente

Agilent Technologies

Agilent Technologies Flow Tracker 1000 Series Manuale operativo

Agilent Technologies

Agilent Technologies 42841A Manuale utente

Agilent Technologies

Agilent Technologies 4263B Manuale utente

Agilent Technologies

Agilent Technologies 16753A Manuale utente

Agilent Technologies

Agilent Technologies OmniBER 718 SDH Manuale utente

Agilent Technologies

Agilent Technologies 8970B Manuale utente

Agilent Technologies

Agilent Technologies 1660A Series Manuale di servizio

Agilent Technologies

Agilent Technologies 8753ET Manuale utente

Agilent Technologies

Agilent Technologies N7745A Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente