Agilent Technologies B2901 Manuale utente

Agilent B2901/02/11/12A Precision Source/Measure Unit

How to source continuous pulses without any measurement

This material shows how to setup the instrument to source continuous pulses without any measurement using the

B2901/02/11/12A, through example to source 2 V continuous pulses with the timing parameters such as 300 us pulse

delay, 200 us pulse width and 500 us source trigger period.

Figure 1 shows the timing chart for the continuous pulse source.

Figure 1. Timing chart for the continuous pulse source

It is required to abort the instrument when you’d like to stop sourcing continuous pulses.

This material also shows how to abort the instrument to stop continuous pulses.

Setting up the pulse condition

Step 1. Press to edit the source function, and then select to set the source function to the voltage

source.

TIMER TriggerOutput ON

Source Value

Output

Off State

V or I

Time

TPD TPW

Pulse

Peak Value

TPD TPW TPD TPW

TSP TSP TSP

TPW : Pulse WidthTPD : Pulse Delay TSP : Source Trigger Period

(1) Press Mode (2) Press VOLTS (V)

Agilent B2901/02/11/12A Precision Source/Measure Unit

Step 2. Press to edit the source value, and then enter 0 V to set the source value to 0 V.

Step 3. Press to edit the limit value, and then enter 10 mA to set the limit value to 10 mA.

Step 4. Press to change the keys shown in Assist keys, and then press to show Pulse Sub-Panel.

Step 5. Press , then press to set the pulse source ON. After turning on the pulse source, you can

see Source Shape which shows the pulse source mode.

(1) Press Source (2) Enter Source Value

(1) Press Limit (2) Enter Limit Value

(1) Press Show Pulse (2) Pulse Sub-Panel appears

(1) Press ON Source Shape

Agilent B2901/02/11/12A Precision Source/Measure Unit

Step 6. Rotate to select Channel 1 Pulse Parameters and set them up as below.

(Peak: 2 V, Delay: 300 us, Width: 200 us)

Step 7. Press to show Trigger Sub-Panel.

Step 8. Press to edit the trigger type, and then select to set the trigger type to MANUAL.

(1) Press Show Trigger (2) Trigger Sub-Panel appears

(2) Press MANUAL(1) Press

Agilent B2901/02/11/12A Precision Source/Measure Unit

Step 9. Rotate to select the source trigger period and press to edit it. Then enter 500 us to set the

source trigger period to 500 us.

Step 10. Rotate to select the source trigger source and press to edit it. Then press to set

the source trigger source to TIMER.

Step 11. If you aren’t on the top of the Function menu, press repeatedly to return to the top level.

Step 12. Press and then press to open Trigger Configuration dialogue.

(2) Enter Source Trigger Period(1) Rotate and press

Source Trigger Period

to edit

(2) Press TIMER(1) Rotate and press

Source Trigger Source

to edit

On the top level of the Function menu

In the middle level of the Function menu

Any tree structure can’t be seen

Some tree structure can be seen

(1) Press Trigger

(2) Press Config

Agilent B2901/02/11/12A Precision Source/Measure Unit

Step 13. Press and select to specify the layer, the trigger parameters of which are configured.

Step 14. Rotate to select the arm count and press to edit it. Then press to set the arm

count to INFINITY.

Step 15. Press to make the modification effective.

(2) Press ARM(1) Press

(2) Press INF.

(1) Rotate and press

ARM Count

to edit

(1) Press OK to make the modification effective

Agilent B2901/02/11/12A Precision Source/Measure Unit

Starting sourcing the continuous pulses

Step 16. If you aren’t on the top of the Function menu, press repeatedly to return to the top level.

Step 17. Press , , , and then press to start sourcing the

continuous pulses.

On the top level of the Function menu

In the middle level of the Function menu

Any tree structure can’t be seen

Some tree structure can be seen

(1) Press Trigger

(2) Press Initiate

(3) Press Trans.

(4) Press Ch 1

Agilent B2901/02/11/12A Precision Source/Measure Unit

Stopping sourcing the continuous pulses

Step 18. If you aren’t on the top of the Function menu, press repeatedly to return to the top level.

Step 19. Press , , , and then press to stop sourcing the

continuous pulses.

On the top level of the Function menu

In the middle level of the Function menu

Any tree structure can’t be seen

Some tree structure can be seen

(1) Press Trigger

(2) Press Abort

(3) Press Trans.

(4) Press Ch 1

Altri manuali per B2901

Questo manuale è adatto per i seguenti modelli

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies E4404B Guida rapida

Agilent Technologies

Agilent Technologies u8903a Manuale utente

Agilent Technologies

Agilent Technologies 2100 Bioanalyzer System Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies Agilent 4396B Manuale utente

Agilent Technologies

Agilent Technologies E5500A Manuale utente

Agilent Technologies

Agilent Technologies 7820A Manuale utente

Agilent Technologies

Agilent Technologies 8719D Manuale utente

Agilent Technologies

Agilent Technologies 4155B Manuale utente

Agilent Technologies

Agilent Technologies 4338B Manuale utente

Agilent Technologies

Agilent Technologies E4443A Guida rapida

Agilent Technologies

Agilent Technologies 85024A Manuale

Agilent Technologies

Agilent Technologies N4373A Manuale utente

Agilent Technologies

Agilent Technologies FieldFox N9912A Guida rapida

Agilent Technologies

Agilent Technologies 4339B Manuale utente

Agilent Technologies

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Istruzioni operative e di sicurezza

Agilent Technologies

Agilent Technologies 8757D Manuale utente

Agilent Technologies

Agilent Technologies 87075C Option H08 Manuale

Agilent Technologies

Agilent Technologies E4402B Option H3B Manuale

Agilent Technologies

Agilent Technologies Agilent 4396B Manuale utente

Agilent Technologies

Agilent Technologies 8720E Series Manuale utente

Agilent Technologies

Agilent Technologies 34952a Manuale utente

Agilent Technologies

Agilent Technologies 8712ET Manuale

Agilent Technologies

Agilent Technologies E4980A Manuale utente

Agilent Technologies

Agilent Technologies U1731A Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente