Agilent Technologies FieldFox N9912A Guida rapida

IIF

IIC

IIO

ADMINISTRATIVE INFORMATION

SERVICE NOTE CLASSIFICATION:

MODIFICATION RECOMMENDED

ACTION X ON SPECIFIED FAILURE

CATEGORY: [[]] AGREEABLE TIME

STANDARDS

LABOR: 7.0 Hours

LOCATION [[]] CUSTOMER INSTALLABLE

CATEGORY: [[]] ON-SITE

X SERVICE CENTER

[[]] CHANNEL PARTNER

SERVICE [[]] RETURN

INVENTORY:X SCRAP

[[]] SEE TEXT

USED [[]] RETURN

PARTS: X SCRAP

[[]] SEE TEXT

AVAILABILITY: PRODUCT’S SUPPORT LIFE

NO CHARGE AVAILABLE UNTIL: 31-DEC-2020

X Calibration Required

[[]] Calibration NOT Required

PRODUCT LINE: WN

AUTHOR: LSH

ADDITIONAL INFORMATION:

PRINTED IN U.S.A.

August 9, 2012

Rev. 20 Page 1 of 3

N9912A-03A

S E R V I C E N O T E

Supersedes:

N9912A-03

N9912A FieldFox RF Analyzer

Serial Numbers: US00000000-US49230000, SG00000000-SG49230000, MY00000000-MY49230000

Replace or modify the System Board (N9912-60004) to prevent power up problem.

Parts Required:

P/N Description Qty.

N9912-60004 System Board 1

N9912-60002 RF assy 1

Page 2 of 3 N9912A-03A

Situation:

A FieldFox may not power up under the following circumstances:

- The FieldFox has been operated until the battery has become completely discharged and the unit

turns off.

- The user connects external power but the unit will not turn on.

- Installing a charged battery in the unit does not fix the problem, the unit will not power up.

Work around:

- Remove the battery and external power from the unit.

- Connect external power to the unit.

- Turn the unit on.

- Insert the battery after the unit has successfully powered on.

Solution/Action:

If the power up problem described above occurs and if the customer insists the problem be permanently fixed

then replace the System Board (N9912-60004). Alternatives to replacing the System Board are to use the

work around given above or to modify the existing System Board.

Process to replace the System Board:

For some units, it will be necessary to replace both the System Board (N9912-60004) and the RF

Assy (N912-60002). See Service Note N9912A-02 for an explanation. Do the following to check the

revision of the RF Assy:

- If the firmware revision is less than A.03.02, upgrade the firmware.

- Power up the FieldFox and press the System hard key.

- Press Service Diagnostics then System Information

- On the “SB Identity” line, the value following “HW=” should be 6 or greater.

- On the “RF Identity” line, note the value following “HW=”.

For “RF Identity”, if the value following “HW=” is 9 or less (or if “N/A” is displayed), the RF Assy

must be replaced along with the System Board.

Assembly replacement instructions are contained in the N9912A Service Guide (N9912-90003).

After assembly replacement is complete, do the following to check for compatible assembly

revisions:

- If the firmware revision is less than A.03.02, upgrade the firmware.

- Power up the FieldFox and press the System hard key.

- Press Service Diagnostics then System Information

- On the “SB Identity” line, the value following “HW=” should be 6 or greater.

After replacing the System Board, perform the Operation Check in chapter 3 of the FieldFox Service

Guide (N9912-90003).

Process to modify existing System Board:

It is possible to modify the existing System Board if your facility has limited surface mount soldering

capability. The modification involves removing a surface mount capacitor. Contact CTD email at ctd-

soco_support@agilent.com to obtain detailed information. If your facility is qualified, this solution

is faster and less expensive.

Page 3 of 3 N9912A-03A

After modifying the System Board, perform the Operation Check in chapter 3 of the FieldFox Service

Guide (N9912-90003).

Altri manuali per FieldFox N9912A

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies 35670A Manuale utente

Agilent Technologies

Agilent Technologies OmniBER 720 Manuale utente

Agilent Technologies

Agilent Technologies 7820A Guida utente

Agilent Technologies

Agilent Technologies 4284A Guida all'installazione

Agilent Technologies

Agilent Technologies WireScope 350 Manuale utente

Agilent Technologies

Agilent Technologies 8719ET Manuale

Agilent Technologies

Agilent Technologies 83483A Manuale utente

Agilent Technologies

Agilent Technologies 8614 B Series Manuale utente

Agilent Technologies

Agilent Technologies 16901A Manuale utente

Agilent Technologies

Agilent Technologies 8504B Manuale utente

Agilent Technologies

Agilent Technologies E5070A ENA Series Manuale utente

Agilent Technologies

Agilent Technologies 8753ET Manuale utente

Agilent Technologies

Agilent Technologies E4406A VSA Series Manuale

Agilent Technologies

Agilent Technologies U1731B Manuale utente

Agilent Technologies

Agilent Technologies HP 8566B Manuale del proprietario

Agilent Technologies

Agilent Technologies G8610A Manuale utente

Agilent Technologies

Agilent Technologies E444 AU Series Manuale utente

Agilent Technologies

Agilent Technologies N9010AK-REA Manuale utente

Agilent Technologies

Agilent Technologies U1731B Manuale

Agilent Technologies

Agilent Technologies U1701A Manuale utente

Agilent Technologies

Agilent Technologies E5071C Manuale utente

Agilent Technologies

Agilent Technologies 4263B Manuale utente

Agilent Technologies

Agilent Technologies 8712ET Manuale

Agilent Technologies

Agilent Technologies 2100 Bioanalyzer System Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente