Agilent Technologies U1731C Manuale utente

Agilent Technologies

Agilent U1731C, U1732C,

and U1733C Handheld

LCR Meter

User’s Guide

II U1731C/U1732C/U1733C User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

U1731-90077

Edition

Seventh Edition, November 28, 2012

Agilent Technologies, Inc.

5301, Stevens Creek Blvd.

Santa Clara, CA 95051 USA

Warranty

The material contained in this document is

provided “as is,” and is subject to change,

without notice, in future editions. Further,

to the maximum extent permitted by the

applicable law, Agilent disclaims all war-

ranties, either express or implied, with

regard to this manual and any information

contained herein, including but not limited

to the implied warranties of merchantabil-

ity and fitness for a particular purpose.

Agilent shall not be liable for errors or for

incidental or consequential damages in

connection with the furnishing, use, or

performance of this document or of any

information contained herein. Should Agi-

lent and the user have a separate written

agreement with warranty terms covering

the material in this document that conflict

with these terms, the warranty terms in

the separate agreement shall control.

Technology Licenses

The hardware and or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the likes

of that, if not correctly performed

or adhered to, could result in dam-

age to the product or loss of impor-

tant data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the likes of that, if not correctly

performed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARN-

ING notice until the indicated

conditions are fully understood

and met.

U1731C/U1732C/U1733C User’s Guide III

Safety Symbols

The following symbols on the instrument and in the documentation

indicate precautions which must be taken to maintain safe operation of

the instrument.

Direct current (DC) Off (supply)

Alternating current (AC) On (supply)

Both direct and alternating current Caution, risk of electric shock

Three-phase alternating current Caution, risk of danger (refer to this manual

for specific Warning or Caution information)

Earth (ground) terminal Caution, hot surface

Protective conductor terminal Out position of a bi-stable push control

Frame or chassis terminal In position of a bi-stable push control

Equipotentiality

Equipment protected throughout by

double insulation or reinforced

insulation

IV U1731C/U1732C/U1733C User’s Guide

Safety Considerations

Read the information below before using this instrument.

The following general safety precautions must be observed during all

phases of operation, service, and repair of this instrument. Failure to

comply with these precautions or with specific warnings elsewhere in this

manual violates safety standards for design, manufacture, and intended

use of the instrument. Agilent Technologies assumes no liability for the

customer’s failure to comply with these requirements.

CAUTION

•Disconnect circuit power and discharge all high-voltage capacitors

before testing.

•When measuring in-circuit components, first de-energize the

circuits before connecting them to the test leads.

•This device is for indoor use at altitudes of up to 2000 m.

•Always use the specified battery type (listed in “Product

Characteristics" on page 76). The power for the meter is supplied

with a single standard 9 V battery. Observe the correct polarity

markings before you insert the battery to ensure proper insertion of

the battery in the meter.

•Line operation is also possible using a 12 V AC to DC adapter. If a

power adapter is selected, please be sure it meets the safety

requirements of a relevant IEC standard.

U1731C/U1732C/U1733C User’s Guide V

WARNING

• Use this meter only as specified in this manual; otherwise, the

protection provided by the meter may be impaired.

• Do not use the meter if it is damaged. Before you use the meter,

inspect the case. Look for cracks or missing plastic. Pay

particular attention to the insulation surrounding the connectors.

• Inspect the test leads for damaged insulation or exposed metal.

Check the test leads for continuity. Replace damaged test leads

before you use the meter.

• Do not operate the meter around explosive gas, vapor, or wet

environments.

• Never use the meter in wet conditions or when there is water on

the surface. If the meter is wet, ensure that the meter is dried only

by trained personnel.

• When servicing the meter, use only the specified replacement

parts.

• When using the probes, keep your fingers behind the finger

guards on the probes.

• Connect the common test lead before you connect the live test

lead. When you disconnect the leads, disconnect the live test lead

first.

• Remove the test leads from the meter before you open the battery

cover.

• Do not operate the meter with the battery cover or portions of the

cover removed or loosened.

• To avoid false readings, which may lead to possible electric shock

or personal injury, replace the battery as soon as the low battery

indicator appears and flashes.

VI U1731C/U1732C/U1733C User’s Guide

Environmental Conditions

This instrument is designed for indoor use and in an area with low

condensation. The table below shows the general environmental

requirements for this instrument.

Environmental conditions Requirements

Operating temperature Full accuracy from –10 °C to 55 °C

Operating humidity Full accuracy up to 80% RH (relative humidity)

Storage temperature –20 °C to 70 °C

Storage humidity 0% to 80% RH non-condensing

Altitude Up to 2000 meters

Pollution degree Pollution degree II

NOTE

The U1731C/U1732C/U1733C Handheld LCR Meter complies with the following

safety and EMC requirements:

•IEC61010-1:2001/EN61010-1:2001 (Second Edition)

•IEC 61326-1:2005/EN 61326-1:2006

•Canada: ICES/NMB-001:Issue 4, June 2006

•Australia/New Zealand: AS/NZS CISPR11:2004

U1731C/U1732C/U1733C User’s Guide VII

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia. This

signifies compliance with

the Australia EMC Framework

regulations under the terms of the

Radio Communication Act of 1992.

ICES/NMB-001 indicates that this ISM

device complies with the Canadian

ICES-001.

Cet appareil ISM est confomre a la

norme NMB-001 du Canada.

This instrument complies with the

WEEE Directive (2002/96/EC) marking

requirement. This affixed product label

indicates that you must not discard

this electrical or electronic product in

domestic household waste.

This symbol indicates the time period

during which no hazardous or toxic

substance elements are expected to

leak or deteriorate during normal use.

Forty years is the expected useful life

of the product.

VIII U1731C/U1732C/U1733C User’s Guide

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard

this electrical or electronic product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste.

To return this unwanted instrument, contact your nearest Agilent Service

Centre, or visit

www.agilent.com/environment/product

for more information.

U1731C/U1732C/U1733C User’s Guide IX

Declaration of Conformity (DoC)

The Declaration of Conformity (DoC) for this instrument is available on the

Agilent website. You can search the DoC by its product model or

description at the web address below.

http://regulations.corporate.agilent.com/DoC/search.htm

NOTE

If you are unable to search for the respective DoC, please contact your

local Agilent representative.

X U1731C/U1732C/U1733C User’s Guide

THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

Altri manuali per U1731C

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies ADM2000 Manuale utente

Agilent Technologies

Agilent Technologies 89410A Manuale utente

Agilent Technologies

Agilent Technologies Agilent 4396B Istruzioni operative

Agilent Technologies

Agilent Technologies U2722A Manuale utente

Agilent Technologies

Agilent Technologies E4404B Guida rapida

Agilent Technologies

Agilent Technologies OmniBER OTN Series Manuale utente

Agilent Technologies

Agilent Technologies 4155B Manuale utente

Agilent Technologies

Agilent Technologies 81950A Manuale utente

Agilent Technologies

Agilent Technologies 3588A Manuale utente

Agilent Technologies

Agilent Technologies N9039A Manuale utente

Agilent Technologies

Agilent Technologies E4418B Manuale utente

Agilent Technologies

Agilent Technologies Cary 8454 Manuale utente

Agilent Technologies

Agilent Technologies 100 Manuale utente

Agilent Technologies

Agilent Technologies N4906B Serial BERT Manuale utente

Agilent Technologies

Agilent Technologies 8960 Manuale utente

Agilent Technologies

Agilent Technologies U1731C Manuale utente

Agilent Technologies

Agilent Technologies 83438A Manuale utente

Agilent Technologies

Agilent Technologies 8560 E-Series Manuale utente

Agilent Technologies

Agilent Technologies 55B AA Manuale utente

Agilent Technologies

Agilent Technologies 86120C Manuale utente

Agilent Technologies

Agilent Technologies 4285A Manuale utente

Agilent Technologies

Agilent Technologies U1401B Manuale utente

Agilent Technologies

Agilent Technologies 86038A Manuale utente

Agilent Technologies

Agilent Technologies U1731A Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente