Agilent Technologies E5022A Manuale utente

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

Agilent E5022A/B and E5023A Hard Disk Read/Write Test System

Operation Manual

27th Edition

Software Revision

This manual applies directly to system which has

the software revision B.04.00.

Part No. E5023-90090

January 2004

Printed in Japan

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Notices

The information contained in this document is subject to change without notice.

This document contains proprietary information that is protected by copyright.All rights

are reserved. No part of this document may be photocopied, reproduced, or translated to

another language without the prior written consent of the Agilent Technologies, Inc.

Agilent Technologies Japan, Ltd.

Component Test PGU Kobe

1-3-2, Murotani, Nishi-Ku, Kobe-shi, Hyogo, 651-2241 Japan

Microsoft is a registered trademark of Microsoft Corporation.

Windows 95/2000 and Visual Basic are registered trademarks of Microsoft Corporation.

Acrobat Reader is a registered trademark of Adobe Corporation.

AgilentTechnologies Japan, Ltd. 1998-2004

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Manual Printing History

The manual’s printing date and part number indicate its current edition. The printing date

changes when a new edition is printed. (Minor corrections and updates that are

incorporated at reprint do not cause the date to change.) The manual part number changes

when extensive technical changes are incorporated.

November 1998 1st Edition

January 1999 2nd Edition

May 1999 3rd Edition

June 1999 4th Edition

August 1999 5th Edition

August 1999 6th Edition

November 1999 7th Edition

December 1999 8th Edition

February 2000 9th Edition

April 2000 10th Edition

June 2000 11th Edition

July 2000 12th Edition

July 2000 13th Edition

October 2000 14th Edition

November 2000 15th Edition

December 2000 16th Edition

March 2001 17th Edition

June 2001 18th Edition

August 2001 19th Edition

August 2001 20th Edition

October 2001 21st Edition

February 2002 22nd Edition (part number: E5023-90040)

July 2002 23rd Edition (part number: E5023-90050)

September 2002 24th Edition (part number: E5023-90060)

January 2003 25th Edition (part number: E5023-90070)

March 2003 26th Edition (part number: E5023-90080)

January 2004 27th Edition (part number: E5023-90090)

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Safety Summary

The following general safety precautions must be observed during all phases of operation,

service, and repair of this instrument. Failure to comply with these precautions or with

specific WARNINGS elsewhere in this manual may impair the protection provided by the

equipment. In addition it violates safety standards of design, manufacture, and intended use

of the instrument.

The Agilent Technologies, Inc. assumes no liability for the customer’s failure to comply

with these requirements.

• Ground The Instrument

To avoid electric shock hazard, the instrument chassis and cabinet must be connected to

a safety earth ground by the supplied power cable with earth blade.

• DO NOT Operate In An Explosive Atmosphere

Do not operate the instrument in the presence of flammable gasses or fumes. Operation

of any electrical instrument in such an environment constitutes a definite safety hazard.

• Keep Away From Live Circuits

Operating personnel must not remove instrument covers. Component replacement and

internal adjustments must be made by qualified maintenance personnel. Do not replace

components with the power cable connected. Under certain conditions, dangerous

voltages may exist even with the power cable removed. To avoid injuries, always

disconnect power and discharge circuits before touching them.

• DO NOT Service Or Adjust Alone

Do not attempt internal service or adjustment unless another person, capable of

rendering first aid and resuscitation, is present.

• DO NOT Substitute Parts Or Modify Instrument

Because of the danger of introducing additional hazards, do not install substitute parts

or perform unauthorized modifications to the instrument. Return the instrument to

Agilent Technologies Sales and Service Office for service and repair to ensure that

safety features are maintained.

• Dangerous Procedure Warnings

Warnings, such as the example below, precede potentially dangerous procedures

throughout this manual. Instructions contained in the warnings must be followed.

WARNING Dangerous voltages, capable of causing death, are present in this instrument. Use

extreme caution when handling, testing, and adjusting this instrument.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

• When you notice any of the unusual conditions listed below, immediately

terminate operation and disconnect the power cable.

Contact your local Agilent Technologies sales representative or authorized service

company for repair of the instrument. If you continue to operate without

repairing the instrument, there is a potential fire or shock hazard for the operator.

— Instrument operates abnormally.

— Instrument emits abnormal noise, smell, smoke or sparklike light during

operation.

— Instrument generates high temperature or electrical shock during operation.

— Power cable, plug or receptacle on instrument is damaged.

—Foreign substance or liquid has fallen into the instrument.

Warning

• Do not stick your fingers near the HLM- Spindle stage while it is moving as it may

cause injury to the operating personnel.

• Do not stick your fingers in shroud while the spindle is running.

• The furnished shroud does not provide protection from glass shards which can cause

death or serious injury. To prevent injury to the operating personnel use a safety cover

when you use glass media. Contact Agilent Technologies when you design a safety

cover.

Caution

• Strong magnetic fields exist in the X-Y stage drive motors. Keep magnetic devices

away from the motor to avoid damaging it.

• When applications such as VEE and Visual Basic is aborted abnormally or when the

reset button on the spinstand turns to red, you should remove the cassette first before

restarting. The cassette and spindle could bump into the shroud as the head moves to

home position during restarting.

Safety Symbol

General definitions of safety symbols used on the instrument or in manuals are listed

below.

Instruction Manual symbol: the product is marked with this symbol when it is necessary for

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

the user to refer to the instrument manual.

Alternating current.

Direct current.

On (Supply).

Off (Supply).

In position of push-button switch.

Out position of push-button switch.

Frame (or chassis) terminal. A connection to the frame (chassis) of the equipment which

normally include all exposed metal structure.

Do not stick your fingers.

WARNING This warning sign denotes a hazard. It calls attention to a procedure, practice,

condition or the like, which, if not correctly performed or adhered to, could result in

injury or death to personnel.

CAUTION This Caution sign denotes a hazard. It calls attention to a procedure, practice, condition or

the like, which, if not correctly performed or adhered to, could result in damage to or

destruction of part or all of the product.

NOTE Note denotes important information. It calls attention to a procedure, practice, condition or

the like, which is essential to highlight.

Certification

Agilent Technologies, Inc. certifies that the module and the spectrum analyzer and the

oscilloscope met its published specifications at the time of shipment from the factory.

Agilent Technologies further certifies that their calibration measurements are traceable to

the United States National Institute of Standards and Technology, to the extent allowed by

the Institution’s calibration facility, or to the calibration facilities of other International

Standards Organization members.

Documentation Warranty

The material contained in this document is provided "as is," and is subject to being

changed, without notice, in future editions. Further, to the maximum extent permitted by

applicable law, Agilent disclaims all warranties, either express or implied with regard to

this manual and any information contained herein, including but not limited to the implied

warranties of merchantability and fitness for a particular purpose. Agilent shall not be

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

liable for errors or for incidental or consequential damages in connection with the

furnishing, use, or performance of this document or any information contained herein.

Should Agilent and the user have a separate written agreement with warranty terms

covering the material in this document that conflict with these terms, the warranty terms in

the separate agreement will control.

Exclusive Remedies

The remedies provided herein are buyer’s sole and exclusive remedies. Agilent

Technologies shall not be liable for any direct, indirect, special, incidental, or

consequential damages, whether based on contract, tort, or any other legal theory.

Assistance

Product maintenance agreements and other customer assistance agreements are available

for Agilent Technologies products.

For any assistance, contact your nearest Agilent Technologies Sales and Service Office.

Addresses are provided at the back of this manual.

Typeface Conventions

Bold Boldface type is used when a term is defined. For

example: icons are symbols.

Italic Italic type is used for emphasis and for titles of

manuals and other publications.

Sample Program

A sample program is installed in the PC. The sample program list is described in the

programming manual.

The customer shall have the personal, non-transferable rights to use, copy, or modify

SAMPLE PROGRAMS in this manual for the Customer’s internal operations. The

customer shall use the SAMPLE PROGRAMS solely and exclusively for their own

purpose and shall not license, lease, market, or distribute the SAMPLE PROGRAMS or

modification of any part thereof.

Agilent Technologies shall not be liable for the quality, performance, or behavior of the

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

SAMPLE PROGRAMS. Agilent Technologies especially disclaims that the operation of

the SAMPLE PROGRAMS shall be uninterrupted or error free. The SAMPLE

PROGRAMS are provided AS IS.

AGILENT TECHNOLOGIES DISCLAIMS THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Agilent Technologies shall not be liable for any infringement of any patent, trademark,

Technologies does not warrant that the SAMPLE PROGRAMS are free from

infringements of such rights of third parties. However, Agilent Technologies will not

knowingly infringe or deliver software that infringes the patent, trademark, copyright, or

other proprietary right of a third party.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Apparecchiature di prova

Agilent Technologies

Agilent Technologies E6392B Manuale utente

Agilent Technologies

Agilent Technologies N9360A Manuale del proprietario

Agilent Technologies

Agilent Technologies aurora Duet Manuale utente

Agilent Technologies

Agilent Technologies 1142A Manuale utente

Agilent Technologies

Agilent Technologies 85056A Manuale

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Manuale utente

Agilent Technologies

Agilent Technologies U1602B Manuale

Agilent Technologies

Agilent Technologies J-BERT N4903A Manuale utente

Agilent Technologies

Agilent Technologies 16452A Manuale operativo

Agilent Technologies

Agilent Technologies N4413A Manuale utente

Agilent Technologies

Agilent Technologies 54845B Manuale utente

Agilent Technologies

Agilent Technologies BERT N4901A Manuale utente

Agilent Technologies

Agilent Technologies e6601a Istruzioni per l'installazione e il funzionamento

Agilent Technologies

Agilent Technologies 8960 Series 10 Manuale utente

Agilent Technologies

Agilent Technologies 85056K Manuale utente

Agilent Technologies

Agilent Technologies Medalist x6000 Manuale utente

Agilent Technologies

Agilent Technologies 1153A Guida alla risoluzione dei problemi

Agilent Technologies

Agilent Technologies InfiniiVision 2000 X-Series Manuale utente

Agilent Technologies

Agilent Technologies 86100C Manuale utente

Agilent Technologies

Agilent Technologies ProBER 2 Istruzioni per il montaggio

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Manuale utente

Agilent Technologies

Agilent Technologies Infiniium 80000 Series Manuale utente

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Manuale

Agilent Technologies

Agilent Technologies Infiniium 90000 Q-Series Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuale utente

Ritmix

Ritmix RAT-701 Manuale utente