Agilent Technologies N4010A Manuale utente

Getting Started Guide

Wireless Connectivity Test Set

N4010A

Manufacturing Part Number: N4010-90086

Printed in Malaysia

November 2013

©Copyright Agilent Technologies, Inc. 2006, 2009, 2013

N4010-90086.book Page i Monday, November 18, 2013 9:20 AM

General

The material contained in this document is provided “as is,” and is subject to being

changed, without notice, in future editions. Further, to the maximum extent

permitted by applicable law, Agilent disclaims all warranties, either express or

implied with regard to this manual and any information contained herein, including

but not limited to the implied warranties of merchantability and fitness for a

particular purpose. Agilent shall not be liable for errors or for incidental or

consequential damages in connection with the furnishing, use, or performance of

this document or any information contained herein. Should Agilent and the user

have a separate written agreement with warranty terms covering the material in this

document that conflict with these terms, the warranty terms in the separate

agreement will control.

N4010-90086.book Page ii Monday, November 18, 2013 9:20 AM

iii

Legal Information

Certification

Agilent Technologies certifies that this product met its published specifications at

the time of shipment from the factory. Agilent Technologies further certifies that its

calibration measurements are traceable to the United States National Institute of

Standards and Technology, to the extent allowed by the Institute’s calibration

facility, and to the calibration facilities of other International Standards Organization

members.

Safety Symbols

The following symbols on the Test Set and in the documentation indicate

precautions which must be taken to maintain safe operation of the Test Set.

This is the ‘Caution - Refer to Instruction

Documentation’ Symbol. The product is marked with

this symbol when it is necessary for the user to refer to

the instructions in the supplied documentation.

Alternating current (AC)

This symbol indicates the position of the operating

switch for ‘Stand-by’ mode. Note, the Test Set is NOT

isolated from the mains when the switch is in this

position. To isolate the Test Set, the mains coupler

(mains input cord) should be removed from the power

supply.

N4010-90086.book Page iii Monday, November 18, 2013 9:20 AM

Safety Notices

This guide uses warnings and cautions to denote hazards

WARNING Warning denotes a hazard. It calls attention to a procedure, which if not correctly

performed or adhered to, could result in injury or loss of life. Do not proceed beyond

a warning until the indicated conditions are fully understood and met.

CAUTION Caution denotes a hazard. It calls attention to a procedure, which if not correctly

performed or adhered to, could result in damage to or destruction of the instrument.

Do not proceed beyond a caution until the indicated conditions are fully understood

and met.

General Safety Information

The following general safety precautions must be observed during all phases of

operation, service, and repair of this Test Set. Failure to comply with these

precautions or with specific warnings elsewhere in this manual violates safety

standards of design, manufacture, and intended use of the Test Set. Agilent

Technologies assumes no liability for the customer’s failure to comply with these

requirements.

WARNING This is a Safety Class I Test Set (provided with a protective earthing ground,

incorporated in the power cord). The mains plug shall only be inserted in a

socket outlet provided with a protective earth contact. Any interruption of the

protective conductor inside or outside of the Test Set is likely to make the Test

Set dangerous. Intentional interruption is prohibited.

DO NOT operate the product in an explosive atmosphere or in the presence of

N4010-90086.book Page iv Monday, November 18, 2013 9:20 AM

flammable gasses or fumes.

DO NOT perform procedures involving cover or shield removal unless you are

qualified to do so: Operating personnel must not remove equipment covers or

shields. Procedures involving the removal of covers and shields are for use by

service-trained personnel only.

DO NOT service or adjust alone: Under certain conditions, dangerous voltages may

exist even with the equipment switched off. To avoid dangerous electrical shock,

service personnel must not attempt internal service or adjustment unless another

person, capable of rendering first aid and resuscitation, is present.

DO NOT operate damaged equipment: Whenever it is possible that the safety

protection features built into this product have been impaired, either through

physical damage, excessive moisture, or any other reason, REMOVE POWER and

do not use the product until safe operation can be verified by service-trained

personnel. If necessary, return the product to a Agilent Sales and Service Office for

service and repair to ensure the safety features are maintained.

DO NOT substitute parts or modify equipment: Because of the danger of

introducing additional hazards, do not install substitute parts or perform any

unauthorized modification to the product. Return the product to an Agilent Sales and

Service Office for service and repair to ensure the safety features are maintained.

CAUTION Before switching on this Test Set, make sure that the correct fuse is installed and

ensure the power supply voltage is in the specified range.

CAUTION Mains supply voltage fluctuations should not exceed +/- 10% of the nominal

selected line voltage.

N4010-90086.book Page v Monday, November 18, 2013 9:20 AM

WARNING Appliance coupler (mains input power cord) is the power disconnect device. Do

not position the Test Set such that access to the coupler is impaired.

Acknowledgements

Bluetooth® and the Bluetooth Logo® are trademarks owned by Bluetooth SIG, Inc.,

U.S.A. and licensed to Agilent Technologies, Inc.

MATLAB® is a U.S. registered trademark of The Math Works, Inc.

Microsoft® is a U.S. registered trademark of Microsoft Corporation. Windows®

and MS Windows® are U.S. registered trademarks of Microsoft Corporation.

Pentium® is a U.S. registered trademark of Intel Corporation.

N4010-90086.book Page vi Monday, November 18, 2013 9:20 AM

Contents

vii

1. Getting Started

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Interfacing with the N4010A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Initial Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Adjusting the Carrying Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Turning the Test Set On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Minimum PC Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing the Measurement Software, Applications, and Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2. Making Your First Measurements

Selecting the Application Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Running a Confidence Check on the Front Panel (Bluetooth) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting USB, GPIB or LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Running a SCPI Confidence Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Running a WLAN Confidence Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Running the Graphical Measurement Application (GMA) N4017A. . . . . . . . . . . . . . . . . . . . . . . . . 33

Rack Mounting the Test Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3. Regulatory Information

General Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Compliance and Markings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Responsibilities of the Customer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Agilent Sales and Service Offices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

N4010-90086.book Page vii Monday, November 18, 2013 9:20 AM

Contents

viii

N4010-90086.book Page viii Monday, November 18, 2013 9:20 AM

Chapter 1 1

1 Getting Started

N4010-90086.book Page 1 Monday, November 18, 2013 9:20 AM

Getting Started

Welcome

Chapter 12

Welcome

Welcome to the Agilent Technologies N4010A Wireless Connectivity Test Set’s

Getting Started Guide.

Use this guide with the N4010A, equipped with any option, to help you:

• Inspect the Test Set.

• Adjust the carrying handle.

• Switch the Test Set on and confirm it passes the power-on self test.

• Determine the minimum requirements for your PC.

• Install the Measurement Software, Applications, and Help from the N4010A

CD-ROM.

• Make connections to the rear panel.

• Run a SCPI confidence check using the Connection Expert application.

• Run a Bluetooth confidence check using front panel operation.

•RunaBluetooth confidence check using the remote interface option.

• Run a WLAN confidence check using the Test Harness example application.

• Attach the rack mounting kits (supplied with option N4010A-AX4).

N4010-90086.book Page 2 Monday, November 18, 2013 9:20 AM

Altri manuali per N4010A

Indice

Altri manuali Agilent Technologies Apparecchiature di prova

Agilent Technologies

Agilent Technologies 1142A Manuale utente

Agilent Technologies

Agilent Technologies 16034H Manuale utente

Agilent Technologies

Agilent Technologies E6198B Manuale utente

Agilent Technologies

Agilent Technologies 16452A Manuale operativo

Agilent Technologies

Agilent Technologies U1583A Manuale utente

Agilent Technologies

Agilent Technologies E1852A Manuale utente

Agilent Technologies

Agilent Technologies E4406A VSA Series Manuale

Agilent Technologies

Agilent Technologies 85057B Manuale

Agilent Technologies

Agilent Technologies Medalist i3070 Series 5i Manuale

Agilent Technologies

Agilent Technologies E5515BU-863 Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies E8285A Manuale utente

Agilent Technologies

Agilent Technologies 54621A Manuale utente

Agilent Technologies

Agilent Technologies J-BERT N4903A Manuale utente

Agilent Technologies

Agilent Technologies 54621A Manuale

Agilent Technologies

Agilent Technologies 85056D Manuale

Agilent Technologies

Agilent Technologies E1852B Manuale utente

Agilent Technologies

Agilent Technologies 54610B Manuale

Agilent Technologies

Agilent Technologies Medalist i3070 Series Guida utente

Agilent Technologies

Agilent Technologies 8960 Series 10 Manuale utente

Agilent Technologies

Agilent Technologies N9360A Manuale utente

Agilent Technologies

Agilent Technologies 16194A Manuale operativo

Agilent Technologies

Agilent Technologies 54641A Manuale utente

Agilent Technologies

Agilent Technologies 8648A Manuale operativo

Agilent Technologies

Agilent Technologies 85050B Manuale

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuale utente

Ritmix

Ritmix RAT-701 Manuale utente