Agilent Technologies N9360A Manuale del proprietario

Agilent Technologies

Agilent N9360A

Multi UE Tester

GSM Programming Manual

Notices

No part of this manual may be repro-

duced in any form or by any means

(including electronic storage and

retrieval or translation into a foreign

language) without prior agreement

and written consent from Agilent

Technologies, Inc. as governed by

United States and international copy-

right laws.

Manual Part Number

N9360-90702

Edition

Fourth Edition, February 2008

Printed in Malaysia

Agilent Technologies Microwave

Products (Malaysia) Sdn. Bhd.

Bayan Lepas Free Industrial Zone

11900 Penang, Malaysia

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the maxi-

mum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sepa-

rate agreement shall control.

Technology Licenses

The hardware and/or software described

in this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S.

Government will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Govern-

ment users will receive no greater than

Limited Rights as defined in FAR 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in personal

injury or death. Do not proceed

beyond a WARNING notice until

the indicated conditions are fully

understood and met.

N9360A Multi UE Tester GSM Programming Manual ii

N9360A Multi UE Tester GSM Programming Manual iii

Preface

Thank-you for purchasing the Agilent N9360A Global System for Mobile

Communication (GSM) option. This is the GSM software for the N9360A

Multi UE Tester.

•Before using the tester, the user is advised to read this manual

carefully to ensure correct usage and also to fully utilize the tester

capability.

•This manual is a reference document and the user is advised to keep it

carefully for future reference.

•The manual includes the characteristics of GSM, the tester operation,

test procedures and screen references.

•Refer to the

N9360A Multi UE Tester Installation Guide

for information

regarding installation and details of the tester. Refer also to the

N9360A W-CDMA Programming Manual

for information about the test

functions of Wideband Code Division Multiple Access (W-CDMA).

•This manual applies directly to the Tester with firmware revision

F.02.14 and above.

Notation

The following notations are used in this manual:

•Softkey:indicates a softkey;

•[Screen Name] : indicates a screen name;

•Tester/tester : indicates the N9360A Multi UE Tester.

Notices

•The information contained in this manual is subjected to change with

notice.

•No part of this manual may be reproduced either mechanically,

electronically or otherwise, without permission from Agilent

Technologies, Inc.

iv N9360A Multi UE Tester GSM Programming Manual

Trademarks

•Ethernet is the registered trademark of the Xerox Corporation.

•EPSON is the registered trademark of the EPSON Corporation.

•Microsoft, Windows and Visual Basic are registered trademarks of

Microsoft Corporation in the United States and/or other countries.

•cdma2000 is a registered trademark of Telecommunication Industry

Association (TIA-USA).

•Other product names and companies used herein are trademarks or

registered trademarks of their respective companies or Agilent

Technologies, Inc. For registered trademarks, the trademarks symbols

® and ™ are omitted in this manual.

N9360A Multi UE Tester GSM Programming Manual v

DECLARATION OF CONFORMITY

According to EN ISO/IEC 17050-1:2004

Generic DoC example

Manufacturer’s Name: Agilent Technologies Microwave Products (M) Sdn. Bhd

Manufacturer’s Address: Bayan Lepas Free Industrial Zone,

11900, Bayan Lepas, Penang, Malaysia

Declares under sole responsibility that the product as originally delivered

Product Name: Multi UE Tester

Model Number: N9360A (GS8210)

Product Options: This declaration covers all options of the above product(s)

complies with the essential requirements of the following applicable European Directives, and

carries the CE marking accordingly:

Low Voltage Directive (2006/95/EC)

EMC Directive (2004/108/EC)

and conforms with the following product standards:

EMC Standard

StandardStandard

Standard

Limit

LimitLimit

Limit

IEC 61326:2002 / EN 61326:1997+A1:1998+A2:2001+A3:2003

CISPR 11:1990 / EN55011:1990 Class A Group 1

IEC 61000-4-2:1995 / EN 61000-4-2:1995 4 kV CD, 8 kV AD

IEC 61000-4-3:1995 / EN 61000-4-3:1996 3 V/m, 80-1000 MHz

IEC 61000-4-4:1995 / EN 61000-4-4:1995 0.5 kV signal lines, 1 kV power lines

IEC 61000-4-5:1995 / EN 61000-4-5:1995 0.5 kV line-line, 1 kV line-ground

IEC 61000-4-6:1996 / EN 61000-4-6:1996 3 V, 0.15-80 MHz

IEC 61000-4-11:1994 / EN 61000-4-11:1994 1 cycle / 100%

Canada: ICES-001:2004

Australia/New Zealand: AS/NZS CISPR11:2004

The product was tested in a typical configuration with Agilent Technologies test systems.

Safety IEC 61010-1:2001 / EN 61010-1:2001

Canada: CAN/CSA-C22.2 No. 61010-1-04

USA: ANSI/UL 61010-1:2004

190695

Supplementary Information:

The N9360A-S01, N9360A-S02, N9360A-S03, N9360A-S04 are the RF shield box options which are

intended to be used together with N9360A (GS8210) tester. Therefore as being an accessory of the

N9360A, the RF shield box does not carry a separate CE marking.

This DoC applies to above-listed products placed on the EU market after:

1-February-2008

Date

Tay Eng Su

Quality Manager

For further information, please contact your local Agilent Technologies sales office, agent or distributor,

or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, D 71034 Böblingen, Germany.

Template: A5971-5302-2, Rev. E.00 N9360A Rev 2.0

vi N9360A Multi UE Tester GSM Programming Manual

Product Regulations

Performance

Criteria

IEC 61326:2002 / EN 61326:1997+A1:1998+A2:2001+A3:2003

CISPR 11:1990 / EN 55011:1990 – Group 1 Class A

IEC 61000-4-2:1995+A1:1998 / EN 61000-4-2:1995 (ESD 4kV CD, 8kV AD) A

IEC 61000-4-3:1995 / EN 61000-4-3:1996 (3V/m, 80% AM) A

IEC 61000-4-4:1995 / EN 61000-4-4:1995 (EFT 0.5kV line-line, 1kV line-earth) A

IEC 61000-4-5:1995 / EN 61000-4-5:1995 (Surge 0.5kV line-line, 1kV line-earth) A

IEC 61000-4-6:1996 / EN 61000-4-6:1996 (3V, 0.15~80 MHz, 80% AM, power line) A

IEC 61000-4-11:1994 / EN 61000-4-11:1994 (Dips 1 cycle, 100%) A

Canada: ICES-001:2004

Australia/New Zealand: AS/NZS CISPR11:2004

EMC

IEC 61010-1:2001 / EN 61010-1:2001

Canada: CAN/CSA-C22.2 No. 61010-1-04

Safety

USA: ANSI/UL 61010-1:2004

Additional Information:

The product herewith complies with the essential requirements of the Low Voltage Directive 2006/95/EC and the

EMC Directive 2004/108/EC and carries the CE Marking accordingly (European Union).

Performance Criteria:

A Pass - Normal operation, no effect.

B Pass - Temporary degradation, self recoverable.

C Pass - Temporary degradation, operator intervention required.

D Fail - Not recoverable, component damage.

N/A – Not applicable.

Notes:

Regulatory Information for Canada

ICES/NMB-001:2004

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est confomre à la norme NMB-001 du Canada.

Regulatory Information for Australia/New Zealand

This ISM device complies with Australian/New Zealand AS/NZS CISPR11:2004

N9360A Multi UE Tester GSM Programming Manual vii

Contents

Preface iii

Notation iii

Notices iii

Trademarks iv

1Legal Information 1-2

Warranty 1-2

Technology Licenses 1-2

Restricted Rights Legend 1-2

Service And Support 1-3

Agilent On The Web 1-3

Agilent By Phone 1-3

2Safety Information 2-2

Safety Summary 2-2

Safety Notices 2-2

Warning Label 2-3

General 2-3

When Operating The Tester 2-4

3Preparing for Use 3-1

Equipment for Automated Test System 3-2

Ethernet 3-2

GP-IB 3-3

RS-232C (Option E01) 3-5

Connecting to Controller 3-6

Ethernet 3-6

GP-IB 3-6

RS-232C 3-6

4Programming Command Guideline 4-1

Getting Started with Programming Commands 4-2

Understanding common terms 4-2

Standard Notation 4-2

Command Syntax 4-3

Overview of the Ethernet Interface 4-5

Overview of the GP-IB Interface 4-8

Overview of the RS-232C Serial Interface 4-10

Programming Guidelines 4-13

Typical Programming Flow for the Tester 4-13

viii N9360A Multi UE Tester GSM Programming Manual

Using the Status Registers 4-16

Why Would You Use the Status Registers? 4-16

Status Register System 4-19

Error Messages 4-23

5Programming Command Reference 5-1

IEEE Common Commands 5-2

IEEE Common Commands Reference 5-2

Top Menu Commands 5-5

System Commands 5-5

Display Commands 5-6

Application Select Commands 5-8

Initial Softkey Screen Commands 5-9

Configuration Screen Commands 5-9

Command Reference for Configuration: Network Setting Screen 5-12

Command Reference for Firmware Update 5-15

Command Reference for Update Flash 5-21

DISPlay Subsystem 5-23

DISPlay Subsystem Command Reference 5-23

Command Reference for Automatic Test Screens 5-25

Command Reference for Manual Test Screens 5-26

Command Reference for TX Analyzer Screens 5-27

Command Reference for Signal Generator Screen 5-28

Command Reference for Configuration Screens 5-28

INITialsoftkey Subsystem 5-31

CONFigure Subsystem 5-32

CONFigure Subsystem Command Reference 5-32

Command Reference for Configuration: Test Sequence Screen 5-34

Command Reference for Configuration: Test Condition Screen 5-58

Command Reference for Configuration: Test Condition (Loss) Screen 5-78

Command Reference for Configuration: Test Condition (BA) Screen 5-79

Command Reference for File Management Screen 5-81

Command Reference for Network Setting Screen 5-85

TESTs Subsystem for Automatic Test 5-89

Command Reference for Stand-by/Measuring Screens 5-89

Command Reference of Tests Results 5-96

Command Reference for Peak TX Power Measurement Screen 5-99

Command Reference for Burst Timing/Power Ramp Measurement Screen 5-100

Command Reference for Phase/Frequency Error Measurement Screen 5-104

Command Reference for Sensitivity/RX Quality/RX Level Measurement

Screen 5-114

N9360A Multi UE Tester GSM Programming Manual ix

Command Reference for MS Information 5-117

TESTs Subsystem for Manual Test 5-118

Command Reference for Stand-by Screens 5-118

Command Reference for Signaling Screens 5-129

Command Reference for MS Information 5-139

Command Reference for Measurement Screen 5-141

Command Reference for Peak TX Power/Burst Timing/Power Ramp Measurement

Screen 5-146

Command Reference for Phase/Frequency Error Measurement Screen 5-153

Command Reference for Sensitivity/RX Quality/RX Level Measurement

Screen 5-154

Output RF Spectrum (ORFS) 5-159

Command Reference for Spectrum Monitor Measurement Screen 5-162

Command Reference for SMS Screen 5-164

TXANalyzer Subsystem 5-166

Command Reference for Stand-by/Measuring Screens 5-166

Command Reference for Peak TX Power/Burst Timing/Power Ramp Measurement

Screen 5-172

Command Reference for Phase/Frequency Error/EVM/Origin Offset Spr.

Measurement Screen 5-180

Command Reference for Output RF Spectrum Screen 5-185

Command Reference for Spectrum Monitor Measurement Screen 5-187

RFGenerator Subsystem 5-190

RFGenerator Subsystem Command Reference 5-190

HCOPy Subsystem 5-194

HCOPy Subsystem Command Reference 5-194

SYSTem Subsystem 5-195

SYSTem Subsystem Command Reference 5-195

TRIGger Subsystem 5-197

TRIGger Subsystem Command Reference 5-197

6Programming Command Summary 6-1

IEEE Common Commands 6-2

Top Menu Commands 6-2

Display Screen 6-5

Initial Softkey Screen 6-6

Configuration Screen 6-7

System Configuration Screen 6-7

Test Sequence : Test Sequence Screen 6-8

x N9360A Multi UE Tester GSM Programming Manual

Configuration : Test Condition Screen 6-13

Configuration: Test Condition (Loss) Screen 6-16

Configuration: Test Condition (Limit) Screen 6-16

File Management Screens 6-18

Network Setting Screens 6-18

Automatic Test Screens 6-20

Stand-by/Measuring Screens 6-20

Test Result Screens 6-22

Manual Test Screens 6-28

Stand-by Screens 6-28

Measuring Screens 6-29

MS Information Screens 6-30

Peak TX Power/Burst Timing/Power Ramp Screens 6-31

Phase Error/Frequency Error Screens 6-32

Sensitivity/RX Quality/RX Level Screens 6-32

Output RF Spectrum (ORFS) Screen 6-33

Spectrum Monitor Screens 6-34

SMS Screen 6-35

TX Analyzer Screens 6-36

Stand-by Screens 6-36

Peak TX Power/Burst Timing/Power Ramp Screens 6-37

Phase Error/Frequency Error Screens 6-39

ORFS Screen 6-39

Spectrum Monitor Screens 6-40

Signal Generator Screen 6-41

Print Screen Function 6-42

System Control Function 6-42

Trigger Function 6-43

7Sample Program 7-1

Summary of Sample Programs 7-2

Components of Window 7-3

Functions 7-4

Test Ev e n t 7-5

Automatic Test Function 7-6

Manual Test (GSM) function 7-10

Manual Test (GPRS) Function 7-13

TX Analyzer Function 7-16

Altri manuali per N9360A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Apparecchiature di prova

Agilent Technologies

Agilent Technologies 85110L Manuale

Agilent Technologies

Agilent Technologies 16442A Manuale utente

Agilent Technologies

Agilent Technologies Infiniium DCA Manuale

Agilent Technologies

Agilent Technologies E4406A Manuale utente

Agilent Technologies

Agilent Technologies Ininiium 9000 Manuale utente

Agilent Technologies

Agilent Technologies U4002A Manuale utente

Agilent Technologies

Agilent Technologies Infiniium 9000 Series Manuale utente

Agilent Technologies

Agilent Technologies InfiniiVision 7000 Series Manuale utente

Agilent Technologies

Agilent Technologies Infiniium 90000 A Manuale utente

Agilent Technologies

Agilent Technologies Medalist i3070 Series Guida utente

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Manuale utente

Agilent Technologies

Agilent Technologies 4072A Advanced Manuale utente

Agilent Technologies

Agilent Technologies Infinium DCA 86100A Manuale utente

Agilent Technologies

Agilent Technologies E8285A Manuale utente

Agilent Technologies

Agilent Technologies 35670A Manuale utente

Agilent Technologies

Agilent Technologies 93000 SOC Series Guida all'installazione

Agilent Technologies

Agilent Technologies 8960 Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies 8960 Manuale di istruzioni

Agilent Technologies

Agilent Technologies E4400-60598 Guida rapida

Agilent Technologies

Agilent Technologies 54831A Manuale utente

Agilent Technologies

Agilent Technologies HP 83711A Manuale utente

Agilent Technologies

Agilent Technologies 16048A Manuale operativo

Agilent Technologies

Agilent Technologies 16334A Manuale operativo

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuale utente

Ritmix

Ritmix RAT-701 Manuale utente