Allen-Bradley ArmorBlock Series Manuale

Wiring Diagrams

ArmorBlock Dual-Port EtherNet/IP 8-Point

Digital Modules

Catalog Numbers 1732E-IB8M8SOER, 1732E-OB8M8SR, 1732E-8CFGM8R

Parts List

Your package contains one 1732E ArmorBlock™ module and these pinout guide

wiring instructions.

For complete installation instructions, refer to the Module Publication Number

table and visit http://literature.rockwellautomation.com.

Module Publication Number

1732E ArmorBlock Dual Port EtherNet/IP Digital Modules Installation

Instructions

1732E-IN007

ATTENTION: Two sets of mounting holes are used to mount the module

directly to a panel or machine. Mounting holes accommodate #6 (M3) pan

head screws. The torque specification is 0.68 Nm (6 lb-in.).

ATTENTION: To comply with the CE Low Voltage Directive (LVD), this

equipment and all connected I/O must be powered from a source compliant

with the following:

Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).

ATTENTION: To comply with UL restrictions, this equipment must be powered

from a source compliant with the following: Limited Voltage.

ATTENTION: The device meets UL Type 1 Enclosure rating.

2ArmorBlock Dual-Port EtherNet/IP 8-Point Digital Modules

Publication 1732E-WD002C-EN-P - March 2014

I/O Connectors

EtherNet/IP Connector

D-Code M12 Micro Network Female Connector

ATTENTION: Sensors/actuators power should not be supplied externally.

IMPORTANT

Use the 1585D–M4DC–H: Polyamide small body unshielded mating

connectors for the D-Code M12 female network connector.

Note that the distance between the center of each Ethernet connector is

16.2 mm. Rockwell Automation recommends the use of suitable cable

based on this measurement. Some of the recommended cables are

1585D-M4TBJM-x and 1585D-M4TBDM-x for daisychains.

ATTENTION: Make sure all connectors and caps are securely tightened to

properly seal the connections against leaks and maintain IP enclosure type

requirements.

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Input

45383

Pico-style 3-Pin Input Female Connector

45383

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Output

Pico-style 3-Pin Output Female Connector

Pico-style 3-Pin Self-configuring Female Connector

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Input or Output

45383

(View into connector)

Pin 1 Tx+

Pin 2 Rx+

Pin 3 Tx-

Pin 4 Rx-

Pin 5 Shell

44808

ArmorBlock Dual-Port EtherNet/IP 8-Point Digital Modules 3

Publication 1732E-WD002C-EN-P - March 2014

Power Connectors

Micro-style 4-Pin Input Male Receptacle

Specifications

IMPORTANT

Use two twisted pair CAT5E UTP or STP cables.

IMPORTANT

The maximum current that any pin on the power connectors can

carry is 4 A.

Environmental Specifications

Attribute Value

Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),

IEC 60068-2-2 (Test Bd, Operating Dry Heat),

IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20…60 °C (-4…140 °F)

Temperature, ambient, max 60 °C (140 °F)

Voltage, power, max 30V DC

Voltage, power, min 12V DC

Output current 0.5A per output, up to 4A per module

D-Code

M12 Pin

Wire Color Signal 8-way Modular

RJ45 Pin

1 White-orange TX+ 1

2 White-green RX+ 3

3 Orange TX- 2

4 Green RX- 6

45764

(View into receptacle)

Pin 1 Auxiliary power+

Pin 2 Module power+

Pin 3 Module power-

Pin 4 Auxiliary power-

45763

Male Input Female Output

Publication 1732E-WD002C-EN-P - March 2014 PN-245397

Allen-Bradley, Rockwell Automation, ArmorBlock and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Pilot Duty Rating DC-14

Enclosure type rating Meets IP65/66/67/69K

ATTENTION: This equipment is considered Group 1, Class A industrial equipment

according to IEC/CISPR 11. Without appropriate precautions, there may be difficulties

with electromagnetic compatibility in residential and other environments due to

conducted and radiated disturbance.

Certifications

Certification (when

product is marked)(1)

(1) See the Product Certification link at http://www.rockwellautomation.com/products/certification/ for

Declarations of Conformity, Certificates, and other certification details.

Value

c-UR-us UL Recognized Component Industrial Control Equipment, certified for US

and Canada. See UL File E322657.

CE European Union 2004/108/EC EMC Directive, compliant with:

EN 61326-1; Meas./Control/Lab., Industrial Requirements

EN 61000-6-2; Industrial Immunity

EN 61000-6-4; Industrial Emissions

EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)

C-Tick Australian Radiocommunications Act, compliant with:

AS/NZS CISPR 11; Industrial Emissions

EtherNet/IP ODVA conformance tested to Ethernet/IP specifications.

KC Korean Registration of Broadcasting and Communications Equipment,

compliant with:

Article 58-2 of Radio Waves Act, Clause 3

Environmental Specifications

Attribute Value

Altri manuali per ArmorBlock Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Allen-Bradley Unità di controllo

Allen-Bradley

Allen-Bradley OptiSIS 1711-P05SISID050S Manuale utente

Allen-Bradley

Allen-Bradley 1747-KE Manuale utente

Allen-Bradley

Allen-Bradley PowerFlex 755 Manuale utente

Allen-Bradley

Allen-Bradley 1791-16BC Manuale utente

Allen-Bradley

Allen-Bradley MSR41 Manuale utente

Allen-Bradley

Allen-Bradley 1771-OG Manuale utente

Allen-Bradley

Allen-Bradley FLEX I/O ControlNet 1794-ACN15 Manuale utente

Allen-Bradley

Allen-Bradley Micro800 2080-MEMBAK-RTC2 Manuale utente

Allen-Bradley

Allen-Bradley ArmorBlock 1732E-12X4M12QCDR Manuale

Allen-Bradley

Allen-Bradley MicroLogix 1200 Manuale utente

Allen-Bradley

Allen-Bradley ControlNet ControlLogix 1756 Manuale utente

Allen-Bradley

Allen-Bradley ControlLogix ControlNet Scanner Module Manuale di servizio

Allen-Bradley

Allen-Bradley Compact 5000 Manuale utente

Allen-Bradley

Allen-Bradley ControlLogix SynchLink 1756-SYNCH Manuale utente

Allen-Bradley

Allen-Bradley 1492-CM1771-LD006 Manuale utente

Allen-Bradley

Allen-Bradley ArmorBlock A Series Manuale utente

Allen-Bradley

Allen-Bradley FLEX I/O 1794-IV32 Manuale utente

Allen-Bradley

Allen-Bradley 1734-OB2 Manuale utente

Allen-Bradley

Allen-Bradley 1794-OA8K Manuale utente

Allen-Bradley

Allen-Bradley CompactLogix EtherNet/IP 1768-EWEB Manuale utente

Allen-Bradley

Allen-Bradley ControlLogix DeviceNet 1756-DNB Foglio di istruzioni

Allen-Bradley

Allen-Bradley Kinetix 5700 Manuale utente

Allen-Bradley

Allen-Bradley 1794-IA8 Manuale utente

Allen-Bradley

Allen-Bradley 1606-XLS960BUFFER Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente