Anritsu Sire Master S331D Manuale utente

User Guide

Site Masterä

S331D

Cable and Antenna Analyzer

Anritsu Company PN: 10580-00079

490 Jarvis Drive Revision: K

Morgan Hill, CA 95037-2809 Published: April 2009

USA Copyright ã2003-2009 Anritsu Co.

WARRANTY

The Anritsu product(s) listed on the title page is (are) warranted against defects in

materials and workmanship for one year from the date of shipment.

Anritsu's obligation covers repairing or replacing products which prove to be defec-

tive during the warranty period. Buyers shall prepay transportation charges for

equipment returned to Anritsu for warranty repairs. Obligation is limited to the origi-

nal purchaser. Anritsu is not liable for consequential damages.

LIMITATION OF WARRANTY

The foregoing warranty does not apply to Anritsu connectors that have failed due to

normal wear. Also, the warranty does not apply to defects resulting from improper or

inadequate maintenance by the Buyer, unauthorized modification or misuse, or op-

eration outside the environmental specifications of the product. No other warranty is

expressed or implied, and the remedies provided herein are the Buyer's sole and

exclusive remedies.

TRADEMARK ACKNOWLEDGMENTS

Windows, Windows 95, Windows NT, Windows 98, Windows 2000, Windows ME,

Windows XP, Windows VISTA, and .NET are registered trademarks of the Microsoft

Corporation.

Anritsu, FlexCal, InstaCal and Site Master are trademarks of Anritsu Company.

NOTICE

Anritsu Company has prepared this manual for use by Anritsu Company personnel

and customers as a guide for the proper installation, operation and maintenance of

Anritsu Company equipment and computer programs. The drawings, specifications,

and information contained herein are the property of Anritsu Company, and any un-

authorized use or disclosure of these drawings, specifications, and information is

prohibited; they shall not be reproduced, copied, or used in whole or in part as the

basis for manufacture or sale of the equipment or software programs without the

prior written consent of Anritsu Company.

UPDATES

Updates to this manual, if any, may be downloaded from the Anritsu Internet site at:

http://www.us.anritsu.com

Anritsu contact information can be accessed from the following Internet site:

http://www.anritsu.com/Contact.asp

S331D, MS2711D

ѻકЁ᳝↦᳝ᆇ⠽䋼៪ܗ㋴ⱘৡ⿄ঞ৿䞣

᳝↦᳝ᆇ⠽䋼៪ܗ㋴䚼ӊৡ⿄

䪙

3E

∲

+J

䬝

&G

݁Ӌ䫀

>&UĎ@

໮⒈㘨㣃

3%%

໮⒈Ѡ㣃䝮

3%'(

ࠋ㒓䏃ᵓ

3&$



hhƻƻ

ᴎ໇ǃᬃᶊ

&KDVVLV

h

ƻhhƻƻ

/&'hhhhƻƻ

݊Ҫ˄⬉㓚ǃ亢᠛ǃ

䖲᥹఼ㄝ˅

$SSHQGHGJRRGV

hƻhhƻƻ

ƻ˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ 6-7 󰵼ޚ㾘

ᅮⱘ䰤䞣㽕∖ҹϟǄ

h˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ 6-7

󰵼ޚ㾘ᅮⱘ䰤䞣㽕∖Ǆ

⦃ֱՓ⫼ᳳ䰤

䖭Ͼ󰵼䆄ᰃḍ᥂  ݀Ꮧⱘǋ⬉ᄤֵᙃѻક∵ᶧ᥻ࠊㅵ⧚ࡲ⊩ǌҹঞ

6-7ǋ⬉ᄤֵᙃѻક∵ᶧ᥻ࠊ󰵼䆚㽕∖ǌⱘ㾘ᅮˈ䗖⫼Ѣ೼Ё೑

䫔ଂⱘ⬉ᄤֵᙃѻકⱘ⦃ֱՓ⫼ᳳ䰤Ǆҙ䰤Ѣ೼䙉ᅜ䆹ѻકⱘᅝܼ㾘㣗ঞՓ⫼

⊼ᛣџ乍ⱘ෎⸔ϞˈҢ⫳ѻ᮹䍋ㅫⱘ䆹ᑈ䰤ݙˈϡӮ಴ѻક᠔৿᳝ᆇ⠽䋼ⱘ⊘

ⓣ៪さথᗻবᓖˈ㗠ᇍ⦃๗∵ᶧˈҎ䑿ঞ䋶ѻѻ⫳⏅ࠏഄᕅડǄ

⊼˅⬉∴ⱘ⦃ֱՓ⫼ᳳ䰤ᰃ  ᑈǄ⫳ѻ᮹ᳳ󰵼Ѣѻકᑣোⱘࠡಯⷕ

བ 61;;;;

 ᑈ㄀  ⫳ѻǄ

For Chinese Customers Only YLYB

Equipment marked with the Crossed-out Wheelie

Bin symbol complies with the European

Parliament and Council Directive 2002/96/EC (the

“WEEE Directive”) in European Union.the

For Products placed on the EU market after

August 13, 2005, please contact your local Anritsu

representative at the end of the product's useful

life to arrange disposal in accordance with your

initial contract and the local law.

Table of Contents

Chapter 1

General Information

Introduction ..................................1-1

Description ...................................1-1

Standard Accessories .............................1-2

Options .....................................1-2

External Detectors ...............................1-3

Optional Accessories..............................1-4

Performance Specifications ..........................1-7

Preventive Maintenance ...........................1-10

Calibration ..................................1-10

InstaCal Module ..............................1-11

Annual Verification..............................1-11

ESD Precautions ...............................1-11

Anritsu Service Centers............................1-11

Mode References ...............................1-11

Chapter 2

Functions and Operations

Introduction ..................................2-1

Test Connector Panel .............................2-1

Display Overview ...............................2-3

Front Panel Overview .............................2-4

Function Hard Keys ..............................2-5

Keypad Hard Keys ...............................2-6

Soft Keys....................................2-8

Power Monitor, External Detector (Option 5) ................2-16

Symbols....................................2-17

Self Test ...................................2-18

Error Messages ................................2-19

Battery Information..............................2-23

Charging a New Battery ..........................2-23

Determining Remaining Battery Life....................2-24

Important Battery Information .......................2-26

Chapter 3

Getting Started

Introduction ..................................3-1

Power On Procedure .............................3-1

Cable and Antenna Analyzer Mode ......................3-2

All Modes...................................3-10

Save and Recall a Setup ..........................3-10

Save and Recall a Display .........................3-10

Changing the Units .............................3-11

Changing the Language...........................3-11

Adjusting Markers .............................3-11

Adjusting Limits ..............................3-12

Adjusting the Display Brightness......................3-13

Printing ....................................3-14

Using the Soft Carrying Case.........................3-15

Chapter 4

Cable and Antenna

Analyzer Measurements

Introduction ..................................4-1

Line Sweep Fundamentals ...........................4-1

CW Mode/RF Immunity ...........................4-3

Information Required for a Line Sweep ...................4-3

Typical Line Sweep Test Procedures ....................4-3

Chapter 5

Power Monitor Mode

Introduction ..................................5-1

Power Measurement ..............................5-1

Chapter 6

High Accuracy Power Meter

Introduction ..................................6-1

Units and Relative Power ..........................6-1

Limit Lines ..................................6-1

Connecting the Sensor ............................6-1

Zeroing the Sensor ..............................6-2

Using Attenuators ..............................6-2

Power Measurement ..............................6-2

Chapter 7

Handheld Software Tools

Introduction ..................................7-1

Features ....................................7-1

System Requirements .............................7-2

Installation ...................................7-2

Using Handheld Software Tools ........................7-5

Downloading Traces .............................7-5

Plot Capture to the PC ............................7-5

Plot Upload to the Instrument ........................7-5

Plot Properties ................................7-6

Signal Standards Editor...........................7-11

Chapter 8

Master Software Tools

Introduction ..................................8-1

Key Features of Master Software Tools ....................8-1

Minimum System Requirements........................8-4

Appendix A

Windowing

Introduction .................................A-1

Examples ..................................A-1

iii

Chapter 1

General Information

Introduction

This chapter provides a description, performance specifications, optional accessories,

preventive maintenance, and calibration requirements for the Site Master™ model S331D.

Throughout this manual, the term Site Master will refer to the S331D.

Model Frequency Range

S331D Cable and Antenna Analyzer Mode: 25 to 4000 MHz

Description

The Site Master is a handheld cable and antenna analyzer designed for installers,

contractors, and wireless service providers who need a portable and rugged cable and

antenna analyzer.

It is designed for measuring Return Loss, VSWR, Cable Loss, of cable and antenna systems

from 25 MHz to 4 GHz. Integrated Distance-To-Fault measurement can be used to locate

the precise location of a fault within the feedline system. Options available with the S331D

include High Accuracy Power Meter (Option 19) and Power Monitor (Option 5).

The Site Master is capable of up to 1.5 hours of continuous operation from a fully charged

field-replaceble battery and can be operated from a 12.5 Vdc source. Built-in energy con-

servation features can be used to extend the battery life.

A standard 640*480 color TFT display provide graphic indications of various measure-

ments. The displayed trace can be scaled or enhanced with frequency markers and limit

lines. A menu option provides for an audible "beep" when the limit value is exceeded.

1-1

Standard Accessories

The Handheld Software Tools and Master Software Tools PC-based software programs

provide a database record for storing measurement data. Software Tools can also convert

the Site Master display to a Microsoft Windowsäworkstation graphic. Measurements

stored in the Site Master internal memory can be downloaded to the PC using the included

null-modem serial cable. Once stored, the graphic trace can be displayed, scaled, or en-

hanced with markers and limit lines. Historical graphs can be overlaid with current data,

and underlying data can be extracted and used in spreadsheets or for other analytical tasks.

The Handheld Software Tools program can display measurements made with the Site

Master (SWR, return loss, cable loss, distance-to-fault) as well as providing other functions,

such as converting display modes and Smith charts. Refer to Chapter 7, Handheld Software

Tools, for more information.

The following items are supplied with the basic hardware:

·65717 Soft Carrying Case

·633-27 Rechargeable Battery, Ni-MH

·40-168-R AC–DC Adapter

·806-141 Automotive Cigarette Lighter 12 Volt DC Adapter

·2300-347 Handheld Software Tools CDROM

·800-441 Serial Interface Cable (null modem type)

·551-1691-R USB to RS-232 Adapter Cable

·10580-00079 S331D Site Master User's Guide

·One-Year Warranty

Options

·Option 5 Power Monitor - Requires external detector

·Option 19 High Accuracy Power Meter (sensor not included)

1-2

Chapter 1 General Information

Indice

Altri manuali Anritsu Strumento di misura

Anritsu

Anritsu Site Master S331C Manuale utente

Anritsu

Anritsu VectorStar ME7838G4 Manuale utente

Anritsu

Anritsu MS2690A Manuale utente

Anritsu

Anritsu Field Master Pro MS2090A Manuale del proprietario

Anritsu

Anritsu PIM Master MW82119A Manuale utente

Anritsu

Anritsu Bit Master MP1026B Manuale del proprietario

Anritsu

Anritsu MS27100A Manuale utente

Anritsu

Anritsu MU182020A Manuale utente

Anritsu

Anritsu Spectrum Master MS2711D Manuale utente

Anritsu

Anritsu MP1800A Manuale utente

Anritsu

Anritsu BTS Master MT8220T Manuale del proprietario

Anritsu

Anritsu VNA Master MS2026C Manuale utente

Anritsu

Anritsu Site Master S113B Manuale utente

Anritsu

Anritsu Spectrum Master MS2721A Manuale utente

Anritsu

Anritsu VectorStar ME7828A Series Manuale utente

Anritsu

Anritsu Site Master S311D Manuale utente

Anritsu

Anritsu MS2830A Manuale utente

Anritsu

Anritsu Network Master Series Manuale utente

Anritsu

Anritsu Series MS278XB Manuale utente

Anritsu

Anritsu MS2690A Manuale utente

Anritsu

Anritsu MS2690A Manuale utente

Anritsu

Anritsu ShockLine MS46131A-010 Manuale utente

Anritsu

Anritsu PowerMaster MA245 A Series Manuale utente

Anritsu

Anritsu Spectrum Master MS2721B Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente