Anritsu VectorStar ME7838G4 Manuale utente

Quick Start Guide

VectorStar™ME7838D4/G4

Multiport Broadband/Banded

Millimeter-Wave System

High Performance Modular Broadband/Banded Millimeter-Wave

Vector Network Analyzer (VNA) Multiport Measurement System

ME7838D4, 70 kHz to 145 (150) GHz

ME7838G4, 70 kHz to 220 (226) GHz

Part Number: 10410-00770

Revision: C

Published: February 2021

Anritsu Company

490 Jarvis Drive

Morgan Hill, CA 95037-2809

USA

http://www.anritsu.com

1. ME7838D4 and ME7838G4 Main Components

QSG-2 PN: 10410-00770 Rev. C VectorStar ME7838D4/G4 QSG

High Performance Modular Broadband/Banded Millimeter-Wave

Vector Network Analyzer (VNA) Measurement System

This guide provides quick setup instructions for the ME7838D4 and ME7838G4 Multiport Broadband/Banded

mm-Wave VNA System assemblies. For additional safety and compliance information, and for more details

about the assembly, configuration, setup, and initial testing of the equipment, refer to the VectorStar™

ME7838x4 Series Multiport Broadband Vector Network Analyzers Installation Guide – 10410-00734.

This and all other documentation that supports the ME7838D4 and ME7838G4 is available on the VectorStar

product web page:

http://www.anritsu.com/test-measurement/products/me7838a4

On this web page, you can select various tabs for more information about your instrument. Included is a Library

tab which contains links to all the latest technical documentation related to this instrument.

1. ME7838D4 and ME7838G4 Main Components

ME7838D4 Broadband Systems

The ME7838D4 Multiport Broadband system consists of the following components:

•MS4647A or MS4647B VNA with Option 007 (Receiver Offset) and Option 08x (Modular Broadband

Connection Capability)

•MN4697C Multiport Test Set

•3736B Broadband Test Set

•3739C Broadband Test Set

•Four MA25300A Millimeter-Wave Modules

•Front and rear panel cables

ME7838G4 Broadband Systems

The ME7838G4 Multiport Broadband system consists of the following components:

•MS4647B VNA with Option 007 (Receiver Offset) and Option 08x (Modular Broadband Connection

Capability)

•MN4697C Multiport Test Set

•3736B Broadband Test Set

•3739C Broadband Test Set

•Four MA25400A Millimeter-Wave Modules

•Front and rear panel cables

ME7838D4 Banded Systems

The ME7838D4 Multiport Banded system consists of the following components:

•MS464xA/B VNA with Option 08x

•MN4694C Multiport Test Set

•3736B Broadband Test Set

•3739C Broadband Test Set

•Four 3744A-EE, 3744A-EW, or four OML/VDI Millimeter-Wave Modules

•Front and rear panel cables

1. ME7838D4 and ME7838G4 Main Components

VectorStar ME7838D4/G4 QSG PN: 10410-00770 Rev. C QSG-3

ME7838G4 Banded Systems

The ME7838G4 Multiport Banded system consists of the following components:

•MS464xB VNA with Option 08x

•MN4694C Multiport Test Set

•3736B Broadband Test Set

•3739C Broadband Test Set

•Four 3744A-EE, 3744A-EW, or four OML/VDI Millimeter-Wave Modules

Caution

A MS464xA/B VNA unit is heavy. To avoid personal injury, it must be lifted and

maneuvered by at least two people during installation.

If mounting on a workbench surface, first position the 3739C Broadband Test Set

with access to its front and rear panels. Stack the remaining test sets on top of one

another, then finally the VNA.

If mounting into rack or console, make sure the Test Sets have been installed, and

that the rack/console is carefully positioned on a flat and level surface. If equipped,

make sure any casters are locked. Use two people to lift the VNA unit and two to

guide it into its shelf rails.

The test loops on the front and rear panels of the VNA are delicate. Be careful not to

bump or bend the test loops.

2. Rear Panel Connections Between System Components (MS464xA VNA)

QSG-4 PN: 10410-00770 Rev. C VectorStar ME7838D4/G4 QSG

2. Rear Panel Connections Between System Components

(MS464xA VNA)

In this section, connect the cables between the VNA and the Test Sets as shown in Figure 1 and Table 1.

Figure 1 ME7838D4 – Rear Panel Cable Connections (MS464xA VNA)

WARNING

No operator service-

able parts inside.

Refer servicing to

qualified personnel.

Ext

Alc

Out

Ext

Analog

a1ba2b2

IF Outputs

External I/O

~ LINE INPUT

47-63 Hz

85-240 VAC

150 VA Max

Fuse 250V 2A T

CAUTION

Do not operate with

power cord ungrounded.

CAUTION

For continued fire protection

replace only with specified

type and rated fuse.

Cable Length

Standard Extended

Module Interface

MN469xC

Test Set

3736B

Test Set

3739C

Test Set

MS464xA

VNA

11 15

1812

6666

7 7 7 7

2. Rear Panel Connections Between System Components (MS464xA VNA)

VectorStar ME7838D4/G4 QSG PN: 10410-00770 Rev. C QSG-5

Table 1. ME7838D4 Multiport Rear Panel Cable Connections (1 of 2)

Index Part Number Cable Description Connection From Connection To

1 3-806-225 BNC (male-male), 24 in MS464xA port labeled:

Ext Analog Out

3736B port labeled:

EXT ANALOG IN

2 3-806-225 BNC (male-male), 24 in MS464xA port labeled:

Ext ALC

3736B port labeled:

EXT ALC OUT

3 3-806-225 BNC (male-male), 24 in

3736B port labeled:

(To Test Set) EXT ANALOG

OUT

3739C port labeled:

EXT ANALOG IN

4 3-806-225 BNC (male-male), 24 in 3736B port labeled:

(To Test Set) EXT ALC IN

3739C port labeled:

EXT ALC OUT

3-73598-1a

(5 cable

bundle)

DB-25 3736B port labeled:

TO TEST SET EXTERNAL I/O

3739C port labeled:

EXTERNAL I/O

SMA male-male flexible:

3-72243-1

3-72243-2

3-72243-3

3-72243-4

3736B ports labeled:

(IF INPUTS)

3739C ports labeled:

(IF OUTPUTS)

73-80734a

(5 cable

bundle)

SMA male-male flexible:

3-72243-21

3-72243-22

3-72243-23

3-72243-24

MS464xA ports labeled:

(Inputs/Outputs)

a1 IF

b1 IF

a2 IF

b2 IF

3736B ports labeled:

(IF OUTPUTS)

a1 IF

b1 IF

a2 IF

b2 IF

8DB-25

MS464xA port labeled:

External I/O

3736B port labeled:

TO VNA EXTERNAL I/O

9 2100-1-R GPIB, 1 m MS464xA port labeled:

Dedicated GPIB

MN469xC port labeled:

IEEE 488.2 GPIB

11 3-62112-81aSMA male-male

semi-rigid

MS464xA port labeled:

b2 loop out

MN469xC port labeled:

TO VNA b2 OUTPUT

12 3-62112-80aSMA male-male

semi-rigid

MS464xA port labeled:

b2 loop in

MN469xC port labeled:

TO VNA b2 INPUT

13 3-62112-81aSMA male-male

semi-rigid

MS464xA port labeled:

P2 source loop out

MN469xC port labeled:

TO VNA Port 2 Src OUTPUT

14 3-62112-80aSMA male-male

semi-rigid

MS464xA port labeled:

P2 source loop in

MN469xC port labeled:

TO VNA Port 2 Src INPUT

15 3-62112-81aSMA male-male

semi-rigid

MS464xA port labeled:

b1 loop out

MN469xC port labeled:

TO VNA b1 OUTPUT

16 3-62112-80aSMA male-male

semi-rigid

MS464xA port labeled:

b1 loop in

MN469xC port labeled:

TO VNA b1 INPUT

17 3-62112-81aSMA male-male

semi-rigid

MS464xA port labeled:

P1 source loop out

MN469xC port labeled:

TO VNA Port 1 Src OUTPUT

2. Rear Panel Connections Between System Components (MS464xA VNA)

QSG-6 PN: 10410-00770 Rev. C VectorStar ME7838D4/G4 QSG

18 3-62112-80aSMA male-male

semi-rigid

MS464xA port labeled:

P1 source loop in

MN469xC port labeled:

TO VNA Port 1 Src INPUT

19 MS464xA VNA

20 MN469xC Test Set

21 3736B Test Set

22 3739C Test Set

a. Tighten each cable in this group using an 8 mm (5/16 in) torque end wrench set to 0.9 N·m (8 lbf·in).

Table 1. ME7838D4 Multiport Rear Panel Cable Connections (2 of 2)

Index Part Number Cable Description Connection From Connection To

3. Rear Panel Connections Between Components (MS464xB VNA)

VectorStar ME7838D4/G4 QSG PN: 10410-00770 Rev. C QSG-7

3. Rear Panel Connections Between Components (MS464xB VNA)

In this section, connect the cables between the VNA and the Test Sets as shown in Figure 2 or Figure 3, and

Table 2.

Cable Connections (Systems with Option 031 Dual Source Architecture)

Figure 2 ME7838D4/G4 Multiport BB/mmW VNA System – Rear Panel Cables (With Option 031)

WARNING

No operator service-

able parts inside.

Refer servicing to

qualified personnel.

Ext

Alc

Out

Ext

Analog

a1ba2b2

IF Outputs

External I/O

~ LINE INPUT

47-63 Hz

85-240 VAC

150 VA Max

Fuse 250V 2A T

CAUTION

Do not operate with

power cord ungrounded.

CAUTION

For continued fire protection

replace only with specified

type and rated fuse.

Cable Length

Standard Extended

Module Interface

MN469xC

Test Set

3736B

Test Set

3739C

Test Set

MS464xB

VNA

11 15

6666

7 7 7 7

Ext In ALC 1

and

Ext In ALC 2

(With Option 031)

Ext ALC 1

(With

Option 031)

Ext ALC 2

(With

Option 031)

3. Rear Panel Connections Between Components (MS464xB VNA)

QSG-8 PN: 10410-00770 Rev. C VectorStar ME7838D4/G4 QSG

Cable Connections (Systems without Option 031)

Figure 3 ME7838D4/G4 Multiport BB/mmW VNA System – Rear Panel Cables (No Option 031)

WARNING

No operator service-

able parts inside.

Refer servicing to

qualified personnel.

Ext

Alc

Out

Ext

Analog

a1ba2b2

IF Outputs

External I/O

~ LINE INPUT

47-63 Hz

85-240 VAC

150 VA Max

Fuse 250V 2A T

CAUTION

Do not operate with

power cord ungrounded.

CAUTION

For continued fire protection

replace only with specified

type and rated fuse.

Cable Length

Standard Extended

Module Interface

MN469xC

Test Set

3736B

Test Set

3739C

Test Set

MS464xB

VNA

11 15

6666

7 7 7 7

3. Rear Panel Connections Between Components (MS464xB VNA)

VectorStar ME7838D4/G4 QSG PN: 10410-00770 Rev. C QSG-9

Table 2. ME7838D4/G4 Multiport Rear Panel Cable Connections (MS464xB) (1 of 2)

Index Part Number Cable Description Connection From Connection To

13-806-225 BNC (male-male), 24 in MS464xB port labeled:

Ext Analog Out

3736B port labeled:

EXT ANALOG IN

3-806-225 BNC (male-male), 24 in

VNA port labeled:

Ext In ALC 1

(No Option 031) (Figure 3)

3736B port labeled:

EXT ALC OUT

3-806-225 BNC (male-male), 24 in

VNA port labeled:

Ext In ALC 1

(With Option 031) (Figure 2)

3739C port labeled:

EXT ALC OUT

3-806-225 BNC (male-male), 24 in

VNA port labeled:

Ext In ALC 2

(With Option 031) (Figure 2)

3736B port labeled:

EXT ALC OUT

33-806-225 BNC (male-male), 24 in

3736B port labeled:

(To Test Set) EXT ANALOG

OUT

3739C port labeled:

EXT ANALOG IN

43-806-225 BNC (male-male), 24 in

3736B port labeled:

(To Test Set) EXT ALC IN

(Figure 3)

(Not used with Option 031)

3739C port labeled:

EXT ALC OUT

3-73598-1a

(5 cable

bundle)

DB-25 3736B port labeled:

TO TEST SET EXTERNAL I/O

3739C port labeled:

EXTERNAL I/O

SMA male-male flexible:

3-72243-1

3-72243-2

3-72243-3

3-72243-4

3736B ports labeled:

(IF INPUTS)

3739C ports labeled:

(IF OUTPUTS)

73-80734a

(5 cable

bundle)

SMA male-male flexible:

3-72243-21

3-72243-22

3-72243-23

3-72243-24

MS464xB ports labeled:

(Inputs/Outputs)

a1 IF

b1 IF

a2 IF

b2 IF

3736B ports labeled:

(IF OUTPUTS)

a1 IF

b1 IF

a2 IF

b2 IF

8DB-25 MS464xB port labeled:

External I/O

3736B port labeled:

TO VNA EXTERNAL I/O

92100-1-R GPIB, 1 m MS464xB port labeled:

Dedicated GPIB

MN469xC port labeled:

IEEE 488.2 GPIB

11 3-62112-81aSMA male-male

semi-rigid

MS464xB port labeled:

b2 loop out

MN469xC port labeled:

TO VNA b2 OUTPUT

12 3-62112-80aSMA male-male

semi-rigid

MS464xB port labeled:

b2 loop in

MN469xC port labeled:

TO VNA b2 INPUT

13 3-62112-81aSMA male-male

semi-rigid

MS464xB port labeled:

P2 source loop out

MN469xC port labeled:

TO VNA Port 2 Src OUTPUT

3. Rear Panel Connections Between Components (MS464xB VNA)

QSG-10 PN: 10410-00770 Rev. C VectorStar ME7838D4/G4 QSG

14 3-62112-80aSMA male-male

semi-rigid

MS464xB port labeled:

P2 source loop in

MN469xC port labeled:

TO VNA Port 2 Src INPUT

15 3-62112-81aSMA male-male

semi-rigid

MS464xB port labeled:

b1 loop out

MN469xC port labeled:

TO VNA b1 OUTPUT

16 3-62112-80aSMA male-male

semi-rigid

MS464xB port labeled:

b1 loop in

MN469xC port labeled:

TO VNA b1 INPUT

17 3-62112-81aSMA male-male

semi-rigid

MS464xB port labeled:

P1 source loop out

MN469xC port labeled:

TO VNA Port 1 Src OUTPUT

18 3-62112-80aSMA male-male

semi-rigid

MS464xB port labeled:

P1 source loop in

MN469xC port labeled:

TO VNA Port 1 Src INPUT

19 MS464xB VNA

20 MN469xC Test Set

21 3736B Test Set

22 3739C Test Set

a. Tighten each cable in this group using an 8 mm (5/16 in) torque end wrench set to 0.9 N·m (8 lbf·in).

Table 2. ME7838D4/G4 Multiport Rear Panel Cable Connections (MS464xB) (2 of 2)

Index Part Number Cable Description Connection From Connection To

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Anritsu Strumento di misura

Anritsu

Anritsu Field Master Manuale utente

Anritsu

Anritsu MS2681A Manuale utente

Anritsu

Anritsu Field Master Pro Manuale utente

Anritsu

Anritsu MS2690A Manuale utente

Anritsu

Anritsu BTS Master MT8222A Manuale utente

Anritsu

Anritsu LMR Master Manuale utente

Anritsu

Anritsu Spectrum Master MS2711D Manuale del proprietario

Anritsu

Anritsu Site Master S113B Manuale utente

Anritsu

Anritsu CMA 5000 - UTA Manuale utente

Anritsu

Anritsu MG9637A Manuale utente

Anritsu

Anritsu 56100A Manuale del proprietario

Anritsu

Anritsu Spectrum Master MS2720T Manuale utente

Anritsu

Anritsu VectorStar ME7848A-0272 Manuale utente

Anritsu

Anritsu MU196060A Manuale utente

Anritsu

Anritsu MW9060A Manuale utente

Anritsu

Anritsu VectorStar ME7828A Series Manuale utente

Anritsu

Anritsu Microwave Site Master S820E Manuale utente

Anritsu

Anritsu Site Master S120A Manuale utente

Anritsu

Anritsu MS27100A Manuale utente

Anritsu

Anritsu MS2681A Manuale utente

Anritsu

Anritsu MS462 Series Manuale utente

Anritsu

Anritsu VectorStar ME7838D Manuale utente

Anritsu

Anritsu BTS Master MT8220T Manuale utente

Anritsu

Anritsu LMR Master Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente