APART KUBO3 Manuale utente

KUBO3(T) / KUBO5(T)

Instruction manual

KUBO3(T) / KUBO5(T)

KUBO3(T) / KUBO5(T) manual

Design cabinet loudspeaker

Safety precautions

• Take care of the loudspeaker wires; they should be free of

damage. Damaged loudspeaker wires may result in poor sound

quality and can damage ampliﬁers.

• No mains power shall be connected to the loudspeakers, doing

so will damage the loudspeaker.

• This loudspeaker should only be serviced by qualiﬁed Apart

Audio service personnel. If not, warranty might be void.

• Use cables of the right gauge, certainly for long runs.

• Use cables with clear color indication and maintain polarity

throughout the whole system.

• Avoid loud feedback from microphones; this can damage your

loudspeakers.

• Clean only with dry cloth.

• Do not operate near heaters or place it near other apparatus

which produce a lot of heat.

• Only use accessories speciﬁed by the manufacturer.

• Make sure the mounting panel can easily support the

loudspeaker’s weight.

Please read carefully before proceeding and keep this manual for

future reference.

Always follow the basic precautions listed below to avoid the

possibility of serious injury or even death from electrical shock,

short-circuiting, damages, ﬁre or other hazards.

These precautions include, but are not limited to, the following:

Instruction manual

KUBO3(T) / KUBO5(T)

• Use only industry-accepted mounting tools and methods.

• Exposure to loud audio levels over a long time can cause severe

hearing loss.

• Don’t forget to consult the local law directions regarding

producing sound in public places.

• Please check the unit’s condition after unpacking. If the outside

of the carton box has been damaged, inform your shipper

immediately.

• Do not open the loudspeaker or attempt to disassemble the

internal parts or modify them in any way. If it should appear

to be malfunctioning, discontinue use immediately and have it

inspected by qualiﬁed Apart Audio service personnel.

• Do not expose the loudspeaker to water, damp or wet

conditions. This can damage the loudspeaker.

• Always attach the safety cable to the provided cabinet insert to

secure the loudspeaker to the building structure. Failure to do

so could result in injury or even death in the event of a failure

of the primary mounting support system. Please, be guided by

applicable building codes here.

The warranty of this product and the applicable terms and

conditions are provided by the dealer where you purchased this

product.

Design cabinet loudspeaker

When design and technology go hand in hand

Kubo is the result of the increasing market demand for stylish

and more subtle design audio products. The Apart research &

development department was able to create a top-notch product

offering amazing sound quality and performance in a discrete and

neutral housing. The unseen original and timeless Kubo cabinet will

blend audio in with any kind of interior, adding elegance to any

architect designed environment.

The K-Mount bracket combined with the carefully designed ﬁxing

K-bolts offers you a safe and comfortable loudspeaker hook-

up. The easy cable management and 140° vertical or horizontal

mounting possibility allows you to install the Kubo everywhere on

any type of wall or ceiling.

The Kubo series

comes with a 3”

full range driver unit

or 5.25” two-way

loudspeaker system

and bass reﬂex

port providing a

fast and dynamic

bass response.

Both models are available in T-version with a rotatable 70 / 100

volt power tapping selector, with 16 ohms connection. The in &

link connection with euroblock connectors, allows for easy daisy

chaining of multiple loudspeakers. The installer friendly end-caps,

held in place by 14 integrated strong neodymium magnets, hide all

connections and bracket hardware on both sides.

The exceptional symmetrical cube-shaped and smart installer-

friendly designed Kubo is bound to become another legendary

Apart product for the small and mid-sized AV market.

Instruction manual

KUBO3(T) / KUBO5(T)

Features

• Stylish and subtle design

• Loudspeakers designed to be used in combination with the

included K-Mount bracket

• Wall and ceiling mountable

• Vertical or horizontal mountable (140°)

• 3” driver for KUBO3(T) and 5.25” driver with 1” tweeter for

KUBO5(T)

• Bass reﬂex

• Easy cable management

• Fixing K-bolts give you a safe and comfortable hook-up

• The power selector switch on the side of the loudspeaker

makes it very easy and fast to balance an installation

• Paintable in any RAL color

• 40 W dynamic power handling for KUBO3(T) and 80 W for

KUBO5(T)

• 8 ohm and 16 ohm (T) versions available

• 70 V and 100 V compatible (T versions)

• End-caps on both sides hide all connections and bracket

hardware

• Typical brilliant Apart sound

• In & link connection with euroblock connectors allows easy

daisy chaining of multiple loudspeakers

• High intelligibility while remaining perfect music reproduction

quality

• Supplied with safety cable

• Integrated safety nut for supplied SAFCAB

Design cabinet loudspeaker

Supplied items / unpacking

Unpack the contents and conﬁrm following items are included.

• Loudspeaker x 2

• Loudspeaker side covers x 4

• Bracket x 2

• Safety cable x 2

• Mounting screws x 1

• Instruction manual x 1

• Connection terminal x 4

Loudspeaker cable is not included.

Installation instructions

ATTENTION

Apart Audio nv is not responsible for damages

resulting from the negligent installation of any

loudspeaker.

WARNING

Please make sure that the mounting structure is

capable of safely supporting the loudspeaker’s

weight.

Instruction manual

KUBO3(T) / KUBO5(T)

1Determine the position where the bracket will be mounted

on the wall or ceiling.

2Mark two mounting holes on the wall or ceiling and mark

the mounting hole in the middle for an invisible installation

of the safety cable (see below).

vertical bracket alignment horizontal bracket alignment

Design cabinet loudspeaker

3If the bracket is to be mounted on stone or concrete,

drill the mounting holes (stone drill 6 mm). Attach the

bracket using the adequate hardware.

For wood use only the screws, for other material use the

correct ﬁxing material. Use only hardware capable of

supporting the loudspeaker’s weight safely. Be careful when

you drill the holes in the wall or ceiling: make sure not to

drill into the loudspeaker cables or other objects hidden

inside the wall or ceiling.

concrete plasterboard wood other

4Install the safety cable on the wall.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente