Asus WL-107 Manuale utente

English

Quick Start Guide

Wireless Local Area Network Card

WL-107

(For 802.11b Wireless Networks)

®

1588

2

Quick Start Guide

English

ASUS WLAN Card

System Requirements

To begin using the ASUS WLAN Card, you must have the following

minimum requirements:

• Windows XP/2000/ME/98SE or Linux Redhat (Version 7.1 or later)

• Standard PCMCIA Slot Type II

• 32MB system memory or larger

• 300MHz processor or higher

Installing the ASUS WLAN utilities and driver

Follow these instructions to install theASUS WLAN card utilities and driver.

Insert the support CD and an autorun menu will appear. If your autorun is

disabled, double click SETUP.EXE in the root directory of the support CD.

2. Click Next on the Welcome screen.1. SelectyourlanguageandclickInstallASUS

WLAN Card Utilities/Driver.

Installation Procedures

Linux users: This manual is meant for Windows users. Information

pertaining to Linux is located in “readme.txt” in the Linux folder.

Linux drivers are also located in the same folder.

Important: Install theASUS WLAN card utilities before inserting the

ASUS WLAN Card into your computer.

Follow these instructions to setup theASUS WLAN card.

1. Install theASUS WLAN card utilities and driver from the support CD.

2. Insert the ASUS WLAN card into your computer.

3

Quick Start Guide

English

ASUS WLAN Card

3. Click Next after reading the Information. 4. Click Next to use the default Destination

FolderorclickBrowsetoselectanotherfolder.

5. Click Next to place icons in the default pro-

gram folder or type another folder name. 6.WhenSetupiscomplete,clickFinish toexit

theinstallationwizardandrestartWindows.

8. Carefully insert the ASUS WLAN card into

yourcomputer’sPC card slot.Windows will

automatically find and configure the ASUS

WLANcardusingthedriversinstalled in the

previous steps.

7. Windows XP users: When the program is

launched for the first time (during Windows

restart), you will be asked which function to

use. Select to use ASUS utilities for more

functions.

Installing the ASUS WLAN utilities and driver (Cont.)

4

Quick Start Guide

English

ASUS WLAN Card

3. Use “Site Survey” if you don’t know the

name of your access point(s). 4. Encryption settings must also match those

set in the access point. Ask your network

administrator about settings if necessary.

Click Apply to save your settings

Configuring the ASUS WLAN utility

After installing the ASUS WLAN Card Utilities, you will need

to make some settings before being able to use your wireless

connection. Double-click theASUSWLAN Control Center icon

to start the utility.

1. Right-click the ASUS WLAN icon and se-

lect “Wireless Settings” 2. Set the Network Name (SSID) to the same

name as the SSID set in your wireless ac-

cess point.

5

Quick Start Guide

English

ASUS WLAN Card

6. You can also see the connection quality on

the “Connection” page. Click OK to exit the

utility.

5. Check the “Status” page to see the “Asso-

ciation State”. It should show “Connected -

xx:xx:xx:xx:xx:xx”.

Soft AP (Windows XP Only)

Soft AP mode allows the ASUS WLAN card to act as a virtual access point.

The computer needs to be connected to a wired network using an Ethernet

connection in order to provide network access to WLAN clients.

1. Select Soft AP Mode 2. Drag and drop a wired network connection

next to the globe icon.

Configuring the ASUS WLAN utility (Cont.)

6

Quick Start Guide

English

ASUS WLAN Card

Reading the ASUS WLAN Status Indicators

The part of the ASUS WLAN Card that protrudes out of the PCMCIAsocket

consists of two LEDs that indicate the status of theASUS WLAN Card .

PWR (Power) LED

OFF: No power or error.

ON: Power ON.

ACT (Activity) LED

OFF: No wireless activity.

Blink: Transmitting or receiving wireless data.

PWR

ACT

3. Enable ICS* and Firewall if desired. Refer

to Windows help for information on “Inter-

net Connection Sharing”.

4. You can easily switch between SoftAP and

Station mode by right clicking the taskbar

icon and selecting “A-S Change Mode”.

*ICS is used to share this computer’s Internet connection with the rest of the computers on your

network. When this computer is connected to the Internet, communication to and from the Inter-

net to all the computers on your network are sent through this computer, called the host com-

puter. Other computers can send and receive email and access the Web as if it were connected

directly to the Internet.

Soft AP (Windows XP Only) (Cont.)

Altri manuali per WL-107

1

Indice

Altri manuali Asus Scheda di rete

Manuali Scheda di rete popolari di altre marche

FirstComm

FirstComm OBiWiFi5G Manuale utente

Sun Microsystems

Sun Microsystems Interface Adapter Manuale utente

TRENDnet

TRENDnet TU2-ETG Manuale utente

YASKAWA

YASKAWA SI-EN3 Manuale utente

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuale utente

Belkin

Belkin F5D7050 Manuale utente

3Com

3Com EtherLink 3C509B Manuale utente

TRENDnet

TRENDnet TEG-PCITX Manuale utente

Cisco

Cisco MC16E Manuale utente

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuale utente

TwinMOS

TwinMOS Booming Manuale utente

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuale utente

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuale utente

National Instruments

National Instruments NI 9234 Manuale utente

Hama

Hama 49276 Manuale utente

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo

Compaq

Compaq Wireless LAN 100 Manuale utente

Bose

Bose PowerMatch Dante Manuale utente