AT&T 5800 Manuale utente

Expansion Handset 5800

Please also read

Part 1 — Important

Product Information

USER’S MANUAL

Part 2

AT&T and the Globe Symbol are trademarks of AT&T Corp., licensed to Advanced American Telephones.

5800_CIB_1ATT 8/6/02 10:43 AM Page II

AT&T and the Globe Design are

trademarks of AT&T Corp., licensed to

Advanced American Telephones.

Printed in China. Issue 1AT&T 08/02

Visit us at www.telephones.att.com

5800_CIB_1ATT 8/6/02 10:43 AM Page III

CONTENTS

BEFORE YOU BEGIN ......................................................................1

About Handset Registration ....................................................................................1

About Softkeys.........................................................................................................1

CHARGE THE BATTERY...................................................................2

To Model 5830 Base Unit .......................................................................................3

To Model 5840 Base Unit .......................................................................................3

INSTALLATION .............................................................................4

Belt Clip ...................................................................................................................4

Headset ....................................................................................................................4

Battery Life...............................................................................................................5

Charge the Handset Battery Pack...........................................................................5

CONTENTS

5800_CIB_1ATT 8/6/02 10:43 AM Page V

About Handset Registration

• You must register this (and any other) handset with

the base, following the directions in “REGISTER

THE HANDSET.” This handset is compatible with

telephone models 5840 and 5830.

• The original handset that came with the base is

automatically registered as Handset 1.

• Additional handsets will be assigned Handset 2,

Handset 3, Handset 4, Handset 5, and Handset 6.

• Whenever you install a handset battery pack, the

handset will display SEARCHING FOR BASE (if

it’s registered) or ENTER BASE ID (if it’s not

registered).

About Softkeys

• The handset softkeys are located below the screen

display.

• Press the softkey below the operation displayed on

the screen to select that operation. (For example,

to enter the menu, press the center softkey).

• Press O/Cat any time to return to the

previous screen.

• Press and hold O/Cto return to the idle

screen.

BEFORE YOU BEGIN

5800_CIB_1ATT 8/6/02 10:43 AM Page 1

1 Install the handset battery pack.

Use only the battery supplied with this handset or AT&T Accessory

Battery Model 2401, SKU#91077.

• When you install the battery pack the first time, the handset

will display ENTER BASE ID.

Charge the handset battery.

• Place the handset in the

remote charging stand.

The CHARGING light

goes on.

• Charge the battery at least

12 hours. After the first

charge, the battery typically

charges in only eight

hours.

CHARGE THE BATTERY

b) Align the contacts and

place the battery pack in

the battery compartment.

a) Remove battery

compartment cover by

pressing on indentation

and sliding downward.

c) Replace cover by

sliding it on its

track up over

battery case until

it snaps firmly

into place.

5800_CIB_1ATT 8/6/02 10:43 AM Page 2

To Model 5830 Base Unit

1Make sure to charge the handset battery pack at least 12 hours.

2At the cordless handset, use the softkey to select NEW.

3Enter the 15-digit Base Unit ID Code located on the underside of

your Model 5830 base.

4Use the softkey to select OK. The screen displays PLEASE WAIT!!.

5After about 45 seconds, the screen displays FOUND BASE. If the

handset displays BASE BUSY TRY LATER, the base is in use.

To Model 5840 Base Unit

1Make sure to charge the handset battery pack at least 12 hours.

2At the 5840 corded base, press .

3Use or to select DISPLAY BASE-ID.

4Press . The base screen will display the 15-digit Base ID

code for about 30 seconds, then return to the idle screen. Write

down the Base ID code so you can enter it at the handset in

STEP 6 below.

5At the cordless handset, use the softkey to select NEW.

6Enter the 15-digit Base ID code.

7Use the softkey to select . The screen displays PLEASE

WAIT!!.

8After about 45 seconds, the screen displays FOUND BASE. If the

handset displays BASE BUSY TRY LATER, the base is in use.

For complete operational instructions,

please refer to the manual that came

with your 5840 or 5830 telephone.

5800_CIB_1ATT 8/6/02 10:43 AM Page 3

Belt Clip

Attach the belt clip (optional).

Headset

You can use this telephone

hands-free when you install

any industry standard

2.5 mm headset (purchased

separately). For best results

use an AT&T 2.5 mm

headset.

Plug the headset into the

jack located on the left side

of the handset (under the

small rubber flap). Do not

force the connection, but

make sure the plug fits

securely.

INSTALLATION

b) Press tabs

on belt clip

into slots

on back of

handset to

reattach.

a) Slide

down

into

grooves

to attach.

c) To remove,

lift one

side

with your

thumbnail

and push

back.

5800_CIB_1ATT 8/6/02 10:43 AM Page 4

Battery Life

A fully charged battery provides an average talk time of about eight

hours, or standby time of five days.

¥NOTE: Talk time and standby time may vary depending on

operating conditions.

Charge the Handset Battery Pack

• After a low battery indicator, the

handset battery needs to be

charged.

• Place the handset in the base so

the CHARGING light goes on.

The battery pack is typically

charged in nine hours.

• If you repeatedly get a low

battery indicator, even after nine

hours of charging, the battery

should be replaced. Use only

AT&T Battery 2401,

SKU# 91077.

CAUTION: Charge the

battery provided with

or identified for use

with this product only

in accordance with the

instructions and limitations

specified in the User’s

Manual, Part 1.

INSTALLATION

5800_CIB_1ATT 8/6/02 10:43 AM Page 5

Congratulations on your purchase

of this AT&T product.

NEED HELP?

Our representatives are here

to help you with any questions

concerning the operation of this

product, available accessories,

or any other related issues.

Call Toll Free

1 (800) 360-4121

or visit our website at

www.telephones.att.com

Need Help Insert 8/6/02 8:25 AM Page 1

Altri manuali per 5800

Indice

Manuali Cornetta popolari di altre marche

Swissvoice

Swissvoice ePure HD Manuale utente

Philips

Philips TD6736/BH051P Manuale utente

ASCOM

ASCOM I62 - Manuale utente

LG-Ericsson

LG-Ericsson LIP-9010 Manuale utente

GE 1583 Manuale utente

iiNet

iiNet Handset Manuale utente

ASCOM

ASCOM 9p23 Manuale utente

AirCell

AirCell ST 3100 Manuale utente

Eaton

Eaton HHIR-LCD-PROG Istruzioni per il montaggio

Mitel

Mitel 112 Manuale utente

SBC

SBC SBC-381H Manuale utente

Mitel

Mitel 5602 Manuale utente

ASCOM

ASCOM d81 Messenger Istruzioni per l'installazione

SpectraLink

SpectraLink 7522 Manuale utente

Avaya

Avaya L100 Series Come usare

ooma

ooma HD2 Handset Manuale utente

Yealink

Yealink IPW56 Manuale utente

Sony

Sony SBH52 Manuale utente