AUDAC MERO6 Guida
MERO6
User & Installation
Manual
www.audac.eu
2
3
Introduction
6” High-end in-wall speaker
The MERO speakers will blend beautifully into any interior, making only their extraordinary
sound draw your attention with their nearly invisible design. Their slim grill with very
thin border of only 1mm and limited grill depth extrudes the surface by only 3.2 mm
when installed.
Their grilles are retained by neodymium magnets which enables assembly in seconds,
while powerful enough to keep it fixed, even when subject to vibrations or if touched. Their
applications range from residential Hi-Fi and home cinema installations to Multi-Zone
systems, unobtrusive installations in lounges, bars, boutiques and offices.
The selection of high-grade materials in combination with accurate acoustics
craftmanship makes the MERO speakers superior in their class. The largest MERO6
consists of a 6” aluminum cone woofer and complementary 1” dome tweeter that are
smoothly matched and optimized using a high-quality crossover network.
An acoustically optimized waveguide matches the dispersion of woofer and tweeter,
while a phaseplug reduces diffraction and enhances off-axis high frequency response.
All these details share their part to its pure sound.
An elegant look with minimal visual impact is created by the slim grill with very thin
border, while great ease and installers convenience is guaranteed using the quick-fix
mechanism with Gold-CON connectivities. Installation can be done in both vertically and
horizontally, while the rotatable tweeter allows optimal orientation positioning.
4
Precautions
READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY
• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER
THROW THEM AWAY
• ALWAYS HANDLE THIS UNIT WITH CARE
• CLEAN ONLY WITH DRY CLOTH
• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS
• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR
SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON
TOP OF THIS DEVICE
• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS
OR OTHER APPARATUS THAT PRODUCE HEAT
• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST,
HEAT, MOISTURE OR VIBRATION
• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS
• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE
MANUFACTURER.
• ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY
SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE
SPEAKER DOWN.
• DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE
SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL
DOWN
• CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.
IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF,
INFORM YOUR VENDOR IMMEDIATELY.
5
CAUTION
• USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER
• USE CABLES WITH CLEAR COLOUR CODING INDICATING THE POLARITY AND
MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.
• ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.
EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.
AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,
THINNER OR OTHER COMBUSTIBLES
• AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING
THE LOUDSPEAKER
• DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT
DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.
CAUTION - SERVICING
This product contains no user serviceable parts. Refer all servicing
to qualified service personnel. Do not perform any servicing
(unless you are qualified to do so.)
EC DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and
further relevant specifications described in following directives:
2004/108/EC (EMC) and 2006/95/EC (LVD)
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The WEEE marking indicates that this product should not be
disposed with regular houshold waste at the end of its product
life. This regulation is created to protect both the environment
and human health.
This product is developed and manufactured with high quality
materials and components which can be recycled and/or reused.
Please dispose this product to your local collection point or
recycling centre for electrical and electronic waste. This will
make to sure that it will be recycled on an environmentally friendly
manner, and will help to protect the environment in which we all
live.
6
Installing the MERO
Introduction
The MERO speakers feature a quick-fixing mechanism, which allows quick and easy
installation of the loudspeakers in only a few minutes.
The installation of the MERO speakers requires a minimum amount of installation skills.
Before the loudspeaker is installed, the location whereto it will be mounted should be
carefully checked to make sure the surface can support the weight of the speaker and
no lines for water, gas, electricity or other supplies are crossing this point.
Installation procedure
To ensure a safe and secure mounting of the loudspeaker, the installation should be
done according to the procedure described below:
1) Firstly cut a hole into the surface whereto the loudspeaker should be installed with
dimensions 254 x 174 mm. The included cutout template can be used for an easy
marking of the installation hole.
174 mm
254 mm
2) Provide the loudspeaker connection cable through the mounting hole. Make sure
the used connection cable is sufficiently thick. The required cable thickness depends
on its length.
3) Take the loudspeaker, and remove the front grill which is held in place by
neodymium magnets. The front grill can be easily removed by gently pulling it.
7
4) Connect the loudspeaker connection cable to the gold plated spring clamp
connectors. Press the button of the corresponding terminal down and insert
the connection cable. After releasing the button, the cable is connected to the
loudspeaker. The Red terminal indicates positive (+) pole and the Black terminal
indicates the negative (-) pole.
Mind the polarity markings when wiring the loudspeaker cables.
Maintain the same polarity and wiring colour coding throughout the entire system to
avoid any mistakes causing malfunction or distortion.
5) Once the connections are made, the loudspeaker can be installed in the provided
mounting hole. Make sure the mounting clips of the loudspeaker are rotated inwards,
making the speaker fit through the hole. Insert the speaker through the provided
mounting hole, and use a screwdriver for tightening the fixing screws.
Once the screws are tightened a quarter turn, the mounting clip will rotate outwards
and will be locked behind the surface. From then on, the loudspeaker is anchored in
the surface and thus can not fall.
6) After the screws are tightened and the speaker is level with the surface, the front
grill can be assembled to the loudspeaker.
8
Additional Information
Technical specifications
RMS Power 60 Watt
Max. Power 120 Watt
Nominal impedance 8 Ohm
Sensitivity 1W / 1m 88 dB
Sound pressure Max W / 1m 106 dB
Frequency response -3 dB 55 Hz - 20 kHz
Cross-over frequency 3.0 kHz
Cross-over network Passive Built-in
Drivers 1” HF Alu tweeter
6” MF / LF Alu woofer
Connectors Gold plated spring clamps
Mounting 4-Screw Quick-Fixing Mechanism
Construction High-Quality ABS
Front finish White Thin edge grill (RAL9003)
(1 mm width x 3.2 mm height edge)
Dimensions 196,5 x 276,7 x 82 mm
Cut-out measurement 174 x 254 mm
Built-in depth 78,5 mm
Weight 1.66 Kg
Packaging Carton box
Shipping weight & Volume 2.1 Kg - 0,0083 Cbm
Accessories included Cut-out template
Instruction manual
Indice
Altri manuali AUDAC Altoparlanti
AUDAC
AUDAC CS55 Istruzioni per l'installazione e il funzionamento
AUDAC
AUDAC MTX Manuale utente
AUDAC
AUDAC WX802/W Istruzioni per l'installazione e il funzionamento
AUDAC
AUDAC KYRA Series Guida
AUDAC
AUDAC SPRING-FIT CENA510D Manuale utente
AUDAC
AUDAC CENA706 Manuale utente
AUDAC
AUDAC CELO8 Guida
AUDAC
AUDAC ARES5A Manuale utente
AUDAC
AUDAC AWP06 Istruzioni per l'installazione e il funzionamento
AUDAC
AUDAC Ateo 2 Guida
AUDAC
AUDAC SPRING-FIT CENA306 Manuale utente
AUDAC
AUDAC MERO2 Guida
AUDAC
AUDAC KYRA24 Guida
AUDAC
AUDAC ATEO2D Guida
AUDAC
AUDAC WXMK2 Series Guida
AUDAC
AUDAC CELO2D Guida
AUDAC
AUDAC XENO 6 Guida
AUDAC
AUDAC GIAX Istruzioni per l'installazione e il funzionamento
AUDAC
AUDAC VEXO112A Manuale utente
AUDAC
AUDAC Ateo 4 Guida
