Bartec Tech200BT Manuale utente

Tech200BT User Guide rev3.0 April 2014

TABLE OF CONTENTS

IMPORTANT NOTICES 2

KIT CONTENTS 3

1.0 GETTING STARTED 4

1.1 TOOL LAYOUT AND CONNECTIONS 4

1.2 POWER ON/OFF 4

1.3 TOOL SET-UP 4

1.4 TOOL DISPLAY AND ICONS 5

1.5 BATTERY INDICATOR/CHARGING 5

1.6 CHARGING YOUR TOOL 6

1.7 INSTALLING TPMS DESKTOP 7

1.8 REGISTERING YOUR TOOL 9

1.9 SETTING UP BLUETOOTH 10

1.10 UPDATING YOUR TOOL 11

2.0 MENU SYSTEM 12

2.1 MENU NAVIGATION 12

2.2 MAIN MENU 13

2.3 MENU SYSTEM: TEST SENSORS 14

2.5 MENU SYSTEM: ICONS 16

2.6 MENU SYSTEM: PROGRAMMING SENSOR – CREATE 17

2.7 MENU SYSTEM: PROGRAMMING SENSOR – COPY 18

3.0 TOOL POSISTIONING/READING A SENSOR 19

4.0 TEST BEFORE YOU TOUCH 20

5.0 SENSOR PROGRAMMING 21

6.0 TPMS RELEARN TYPES 22

6.1 STATIONARY RELEARNS 22

6.2 ACTIVE (DRIVE) RELEARNS 22

6.3 OBD RELEARNS 23

7.0 TPMS DESKTOP 24

7.1 DESKTOP APPLICATIONS 25

7.2 TPMS DESKTOP HOME SCREEN 25

7.3 MANAGING YOUR BLUETOOTH CONNECTION 26

7.4 AUDITS 26

7.5 UPDATES 27

7.6 VEHICLE LOOK-UP 27

7.7 SETTINGS 27

7.8 TPMS PAD 27

7.9 TRAINING VIDEOS 27

8.0 TOOL SERVICE 28

8.1 PROPER CARE AND CLEANING 28

8.2 SERVICE 28

9.0 BARTEC TPMS TECH SUPPORT 29

APPENDIX A: GLOSSARY 30

APPENDIX B: VIN 31

APPENDIX C: FAQ & TROUBLESHOOTING GUIDE 32

APPENDIX D: TPMS SYSTEM REVIEW 33

LIMITED WARRANTY 34

TOOL REGISTRATION FORM 38

REPLACMENT PARTS AND ACCESSORIES 39

Tech200BT User Guide rev3.0 April 2014

Welcome to the Bartec TPMS Family! Hopefully you will find our tool and

support to be the best! Please take a few moments to review this user guide

in its entirety for instructions on all the features you find in your new Tech200.

IMPORTANT NOTICES

All specifications, illustrations and information contained within this manual are

based on the most current information available at the time of publication.

Bartec USA reserves the right to make changes at any time without obligation to

notify any person or organization. Bartec USA will do its best to keep you the

customer informed of any changes that might affect the tools performance.

Important items will be called out by using “NOTE.” Information following this

indication should always be paid attention to.

Whenever you see this symbol, the information you are about to read

is vitally important and should be committed to memory.

This device complies with Part 15 of the FCC Rules and with Industry Canada

license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This

device must accept any interference received, including interference that may

cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

appareils radio exempts de licence. L'exploitation est autorisée aux deux

conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d'en compromettre le fonctionnement.

Note: Changes or modifications not expressively approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

Tech200BT User Guide rev3.0 April 2014

KIT CONTENTS

•Tech200 TPMS Tool

•Power Supply

•Bluetooth USB Dongle (Adaptor)

•Re-Learn Magnet (for early model GM vehicles with

sensors)

•USB Cable

•Tech200 User Guide

•Kit CD

Tech200BT User Guide rev3.0 April 2014

1.0 GETTING STARTED

Please register your tool on the Bartec website at

www.bartecusa.com. This is the best way to get information about

software updates, new products and other important TPMS news.

Bartec respects your information and keeps it private!

1.1 Tool Layout and Connections

The Tech200 features a 3 button key pad for easy navigation of the various

menus. The tool has a USB connection for Updating, Data, and Charging

located on the right side of the tool.

1.2 Power On/Off

The Tech200 is powered on by holding the TEST/ENTER key. Upon power up, the

screen displays the Bartec logo on the tool.

TEST-

ENTER Key Hold to POWER ON or POWER OFF

The Tech200 will begin to power down automatically after 3 minutes of

inactivity, and fully shut off after 5 minutes of inactivity. To power the tool off

at any time, press and hold the TEST/ENTER Key for approx 2 seconds – a good

bye message will flash and the tool will shut off.

NOTE:

The Tech200 automatically powers on when the charger or USB port is in use

[auto power off is not operational during this time].

1.3 Tool Set-Up

Your tool is ready to use out of the box and requires no set-up.

Tech200BT User Guide rev3.0 April 2014

1.4 Tool Display and Icons

1.5 Battery Indicator/ Charging

This status line indicator will illustrate the remaining charge status of the battery.

As different TPM types will ‘use up’ differing amounts of energy, the indicator

can only provide estimates of remaining life left before a recharge is required.

The battery indicator will flash while charging.

Indicates more

selections

Current

Selection

Battery

Tech200BT User Guide rev3.0 April 2014

1.6 Charging your tool

The Tech200 is shipped from the factory with a fully charged battery, however

it is recommended that you charge your tool a minimum of four [4] hours

before using.

Use of un-approved power supplies may damage your tool and will

void the tool warranty.

The Tech 200 comes with the rechargeable battery already installed.

Battery replacement must be done at the factory.

For optimum performance, always keep your Tech 200 sufficiently charged. It

is recommended that you charge the tool 2 + hours before first use.

Alternate Charging Methods:

A. USB Cable to PC

You can also charge the Tech 200 using the supplied USB cable attached to your

computer.

Tech200BT User Guide rev3.0 April 2014

1.7 Installing TPMS Desktop

The TPMS Desktop is required to use the wireless features of the Tech200. This

software is available from the Bartec USA website at www.bartecusa.com and

is also loaded onto the KIT CD. The preferred method is installing from the

Bartec USA website. How to use TPMS Desktop is reviewed in Section 7.

This application must be loaded onto the PC or Laptop BEFORE

using the Bluetooth or Wi-Fi features.

www.bartecusa.com https://tools.bartecusa.com/login.aspx

Once you’ve clicked the link, this screen should open. Click INSTALL to start the

process of loading the software to the PC or Laptop.

Link is at top of the

BartecUSA site

Link is also on the TPMS

Support Center

Click

Tech200BT User Guide rev3.0 April 2014

The installation wizard should launch and guide you through the install process.

The first thing you will be prompted to do is save the “setup.exe” file.

On most computers, the file will be saved to a “downloaded” folder. Your

computer will either prompt you that the down load is complete, or you may

have to look for it on the desk top.

Once “setup.exe” is launched, you will see the following window. Click RUN to

start the install.

Tech200BT User Guide rev3.0 April 2014

The install wizard will advise you of the install status. Follow the onscreen

instructions carefully.

Once installed and running, the TPMS Desktop will help you organize AUDIT

reports, keep your tool current, and manage your customers, all from a single

access point. Once installed, click the REGISTER TOOL link at the top to begin

creating your online account at www.bartecusa.com and registering your new

Tech200 tool!

1.8 Registering your tool

You can register your Bartec

Tech200 @ www.bartecusa.com.

Follow the on-screen prompts filling

in your information and tool serial

number. Please have your tool

serial number, date of purchase and

place of purchase in order to

properly register your tool.

Tech200BT User Guide rev3.0 April 2014

1.9 Setting Up Bluetooth

For your convenience, Bartec has included a Bluetooth Dongle [adaptor]. This

is to be used with PC’s or Laptops that do NOT have Bluetooth connectivity

already installed. Follow the install and setup instructions that are included in

this kit. Begin by inserting the set-up CD and install the necessary driver and

software.

Insert the CD BEFORE installing the dongle [adaptor]. Follow the

instructions of the install wizard.

Make sure to reboot the computer

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Bartec Strumento di misura

Bartec

Bartec TECH550PRO Manuale utente

Bartec

Bartec ALCAR TECH600 Manuale utente

Bartec

Bartec 07-662 Series Guida rapida

Bartec

Bartec VOLUTANK Petro 3003 Manuale utente

Bartec

Bartec HYGROPHIL H 4230-10 A Series Manuale utente

Bartec

Bartec RLAnet 17-85G5-2123 Series Scheda tecnica

Bartec

Bartec MAK TIGER 3003 Manuale utente

Bartec

Bartec TECH 1000 Manuale utente

Bartec

Bartec Tech1000 Manuale utente

Bartec

Bartec Syscom MR3000 Series Manuale utente

Bartec

Bartec MAK TIGER 3003 Manuale utente

Bartec

Bartec P-600 Manuale utente

Bartec

Bartec ORB P-800LT Manuale utente

Bartec

Bartec RDA01 Manuale utente

Bartec

Bartec MR3000DMS Manuale utente

Bartec

Bartec TECH450PRO Manuale utente

Bartec

Bartec MAK 3003 Manuale utente

Bartec

Bartec SYSCOM ROCK Manuale utente

Bartec

Bartec TECH600PRO Manuale utente

Bartec

Bartec Tech200 Manuale utente

Bartec

Bartec RDW 03 Manuale utente

Bartec

Bartec Tech500 Manuale utente

Bartec

Bartec TECH400 Manuale utente

Bartec

Bartec ComEx Flex Guida rapida

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente