Bellini BWF145BI Istruzioni per l'installazione
Thank you
for
purchasing
Bellini Wine Fridge, the appliance carries
a 2 year replacement warranty, be sure
to retain this Instruction Manual and
receipt.
For Technical queries please contact
Aust: 1300 373 199
NZ: 0800 764 912
GSM Retail Australia Pty Ltd ABN: 53 007 582 475
For Technical queries: 1300 373 199 Aust OR 0800 764 912 NZ
Model: Beverage Cooler - BBF145BI / BBF145BI-F
Content
Safety instructions & warnings………………………………..…………………………….1-2
Installation………………………………..………………………………………………………….3
Description of the appliance………………………………..………………………………..4-5
Operation………………………………..…………………………………………………………….6-8
Troubleshooting………………………………..…………………………………………………..8
Maintenance and cleaning………………………………..…………………………………..9
Technical parameters………………………………..…………………………………………..10
GSM Retail Australia Pty Ltd ABN: 53 007 582 475
For Technical queries: 1300 373 199 Aust OR 0800 764 912 NZ
Model: Beverage Cooler - BBF145BI / BBF145BI-F
1
Safety instructions & warnings
Your safety is of the utmost importance to our company. Please make sure that
you read this instruction booklet before attempting to install or use the
appliance. If you are unsure of any of the information contained in this
booklet, please contact the Consumer Service Support hot line.
●This appliance can be used by children
aged from 8 years and above and
persons with reduced physical,sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
●Children should be supervised to
ensure that they do not play with the
appliance.
●This appliance is intended for
HOUSEHOLD USE ONLY and not for
commercial or industrial use.
●Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
●Do not use mechanical devices or other
means to accelerate the defrosting
process, other than those
recommended by the manufacturer.
●Do not damage the refrigerant circuit.
●Do not use electrical appliances inside
the storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
●Make sure that the appliance is
connected to power supply in
accordance with the rating label.
●Use an independent grounded socket
with 10A or higher,do not connect to
transformer or socket with multiple
outlets.
●Make sure socket is grounded properly
and do not modify power cord & plug.
●Connect power plug with socket firmly in
case of possible risk of fire.
●Plug should be within reach for easy
disconnection after the appliance
positioned in case of accidents
occurred.
●Do not store or burn gasoline or other
inflammablesnear the appliance in
case of possible fire.
2
●Do not store inflammables, explosives,
acid & alkaline liquids etc.in the
compartment of the appliance.
●Do not operate other appliances in the
compartment.
Child Safety
●Do not allow child play inside the
appliance in case of entrapment.
●Do not allow child hang on the door to
play in case of falling of the appliance.
●Do not allow child reach into
compressor compartment or touch
metal components at rear of the
appliance in case of possible injury.
Keep away from water
●Do not spray water on the appliance or
wash the appliance by pouring or
immersing in water in order to prevent
electric shock.
Be careful touching frozen surfaces
●Do not touch internal wall surfaces with
wet hands in order to prevent skin
adhering and cause injury when
appliance is in operation.
Modifications to the
appliance are not permitted
●Do not attempt to make modifications to
the appliance that may compromise
electrical safety or causes damage to the
appliance
●Unplug the appliance when not in use
●Unplug appliance when conducting maintenance
or cleaning activities on the appliance
●Unplug the appliance in the event of a power
shortage
Disposal of the appliacne
●Please dispose of the product in accordance
with Local council regulations at end of
appliance working life.
●Before disposal, remove the door in order to
prevent child play accidental trapping inside the
appliance that may go unnoticed.
●Dispose of appliance at a designated local
council recycling depot
Do not damage the power cord
●Do not disconnect the appliance by pulling on
the power cord, only remove from power outlet
by holding onto the plug.
●Do not trap the power cord under or between the
appliance in situ or transition that may cause
damage resulting into electrical safety hazard.
●Keep power cord clear to avoid damage to
cord /plug when moving the appliance.
When the power cord is damaged
●Do not use the appliance with a damaged power
cord/plug, ensure it immediately gets replaced
by service agent or licensed electrician.
3
Installation
Position
Do not lean the appliance over more than 45°when moving it to position.
The appliance must be placed on flat,firm & dry floor or similar noncombustible
pad; do not use the package foam pad.
酒柜结构及安装示意图
Do not place the appliance on wet surfaces.
Do not place this appliances in covered areas where its exposed to extreme cold
temperatures.
Do not place this appliance outdoors where it is exposed to direct sunlight or weather.
The appliance is designed to either be positioned under
benchtop/counter or freestanding.
Illustration for building under the counter:
After appliance is first switched On, allow the appliance to cool for a minimum of 1
Hour before placing the wine bottles inside.
4
Description of the appliance
Accessories & name
Note: Shelves, door frame, handle and other accessories could be different according
to different models and configuration. All photos in this manual are for reference. The
appliance you buy might not be exactly the same as shown here. Please refer to the
actual product.
Installing the handle and reversing the door of wine cooler
1. Install handle to the door frame of the appliance.
The handle is delivered in a separated
package with screws together inside the
carton.
① Holes for attaching the handle are
concealed behind the rubber door seal, pull
door seal partially away to gain access and
reveal the two small holes on the door
frame
②Align the screw holes in the door handle
with the holes on the door frame, insert
screws and secure the door handle by
tightening screws with screw driver. ③
④Push door seal back into place to
conceal the screw heads.
1.
Enclosure
2. Shelf
3. Display panel
4.
Rear Panel
5.
Vent
6. Adjustable foot
7. Lower hinge
8. Door
9. Handle
10. Door seal
11. Upper hinge
5
2. Reversing the door
Our wine cooler is delivered with the door opening from left to right. To reverse the
opening direction:
Open the door at 90 degrees and keep it steady.
Unscrew the two screws① from the right lower hinge② [Figure 1].
Pull the door⑤ outwards slowly [follow the arrow direction in Figure 2] to get off
the lower hinge② and continue to pull the door⑤ downwards slowly to remove
the door entirely and away from the top Right hinge ④ now remove lower hinge
plate by undoing bracket retaining screws attaching bracket to cabinet [Figure 2].
Unscrew top right hand hinge bracket from cabinet, retain both hinge brackets for future
use if you want to restore door back to original position. Figure 3]
Provided with the appliance inside a polybag are the left hand side hinge brackets
to suit lefthand door fit, install these hinge brackets in reverse order of removing
bracket from the righthand side.[Figure 4]
Turn the door around 180 Degrees so door hinge holes now face the lefthand
side,mount the lower hinge plate to the bottom of the door and secure.
Lift door into place and interlock top of the door with hinge pin, align bottom of the
door holes on cabinet hinge bracket and secure with two screws.
Lefthand door fit is now completed.
6
Operation
Start operation
1. Clean storage compartment
Before switching appliance On, give the storage compartment a clean to remove any dust
deposits, at the same time check that drainage pipe is satisfactorily connected .（For
details, please refer to the “Maintenance and cleaning”）
2. Let appliance settle after installation
Before switching the appliance On, allow refrigerant to settle first for at least 30 Minutes
after installation.
3. Power on
Switch appliance On,allow it to operate for a minimum of 1 Hour and than check
that the appliance has actually cooled, if all OK you can now place your wine
bottles into the appliance .
Control panel
All keys are not active with the appliance in lock mode. Please unlock first.
ON/OFF
1. Press and hold ON/OFF Key for 3 seconds to activate appliance to go in stand-by mode
2. Press ON/OFF key again for 3 seconds to unlock from stand-by mode back to
operation mode.
Light
Press light Key to activate or deactivate LED light inside storage compartment.
In stand-by mode this operation cannot be actioned.
Zone switch
Press this key to select and switch between Upper and Lower compartment
zones to set the desired temperature for the selected zone.
Press key once, the LED Display will flash, indicating that zone is ready to
change temperature.
Press arrow UP/DOWN keys to scroll and select the desired temperature,
Press zone key again to engage /set the temperature.
Adopt the same process to select and set temperature for the other zone/
compartment.
7
UP
Press UP Key once , LED display flashes the current set temperature, repeated
pressing increases temperature incrementally by 1 Degree, increase until you reach
desired temperature, Press Zone Key to set.
Note: Display will flash for 5 Seconds only, if no action is taken during this time or the
zone key pressed to lock in new selected temperature, the flashing stops and engages
the last set temperature.
Down
Press DOWN Key once , LED display flashes the current set temperature,
repeated pressing decreases temperature incrementally by 1 Degree,
decrease until you reach desired temperature, Press Zone Key to set.
Note: Display will flash for 5 Seconds only, if no action is taken during this
time or the zone key pressed to lock in new selected temperature, the
flashing stops and engages the last set temperature.
Child Lock（Combination key）
1、Lock：Press both keys at the same time for 3 seconds to lock.
2、Unlock：Press both keys at the same time for 3 seconds to
unlock.
Fahrenheit/Celsius display interchange
Switch temperature display between Fahrenheit and Celsius by pressing the
key.
Attention
1. For both the upper or lower zones/compartments the temperature can be set to range
from 5-22 Degrees,however the lower zone can only be set equal to the upper zone
or to a higher temperature(E.g. always set upper zone temperature first for the cooler
wines , then lower zone temperature can be increased for higher temperature wines).
2. Alarm sound: when the system seperate and alarm sound, press any
key on the control panel to cancel the alarm sound.
3. Temperature sensor failure:
When the temperature sensor failures occur, error code displays.
E1 for open circuit and E2 for short circuit of upper zone.
E5 for open circuit and E6 for short circuit of lower zone.
Indice
Altri manuali Bellini Elettrodomestico da cucina
Bellini
Bellini BECF40 Manuale utente
Bellini
Bellini BP270EG FINELINE Istruzioni per l'installazione
Bellini
Bellini BTPZO945B Manuale utente
Bellini
Bellini BEDM10 Manuale utente
Bellini
Bellini BTMKM600X Manuale utente
Bellini
Bellini BTSER10 Manuale utente
Bellini
Bellini SUPERCOOK BTMKM810X Manuale utente
Bellini
Bellini BTMKM810XCon Manuale utente
Bellini
Bellini BTMKM510W Manuale utente
Bellini
Bellini BTMF405 Manuale utente
