Using the appliance:
The blender is intended for:
• Blending uids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
Avoid touching the sharp blades. If the blades get stuck, unplug the appliance and remove
the ingredients that are blocking the blades with spatula.
1. Put the ingredients in the jar unit.
Do not ll the jar unit beyond the MAX indication.
Never ll the jar unit with ingredients that are hotter than 60 °C.
2. Place the blender jar unit on the body unit. Fix the jar unit by turning it. Be careful not to
exert too much pressure on the jar unit.
3. Put the lid on the jar unit.
4. Turn the cup to x with the lid.
5. Put the plug in the wall socket and switch on the appliance by pressing the switch button.
6. Do not operate the appliance longer than 1 minute each time. If you have not nished
blending after 1 minute, switch the appliance o and wait 1 minute before you continue
using it.
Product Cleaning:
Cleaning the appliance and these parts are the easiest immediately after use.
Do not use abrasives, scourers, alcohol, etc to clean the appliance. Never immerse the body unit
water or clean it water or clean it in the dishwasher.
1. Unplug the appliance and remove the detachable parts.
2. Clean the parts in lukewarm water with some washing-up liquid and rinse them under
the tap or clean them in the dishwasher.
3. If necessary, remove the rubber sealing ring from the blade units and rinse it with water.
4. Use only a moist cloth to clean the body unit.
1. Place the blend sport bottle on a at surface with the opened ending
to face up, ll the sport bottle with
your favorite ingredients until the 500ml marking
2. Fasten the blade assembly on the open ending of the sport bottle.
Turn the sport bottle upside down, line up arrows on the base, and
place the sport bottle in the base. With one
simple touch blending begins by pressing the sport bottle down in the
base. To lock the sport bottle in the base for hands-free operation,
simply turn the sport bottle clockwise in the base. Blending will stop
once you either stop pressing the sport bottle into the base or once you
unlock the sport bottle from the base.
3. Turn the sport bottle over and place on a at surface.
Replace the blade assembly with the drinking lid.
GB
BH-9065-b.indd 6 2019. 04. 24. 13:05:34
