BIRD O2 Manuale utente
O2RECEVER
A
B
C
D
O2TRANSMITTER
A
B
C
D
O2
Important Safety Instructions
CAUTION
This equipent has been tested and found to comply with
the limits for a Class B digital device pursuant to part 15
⑴This device may not cause harmful interference
of FCC rules.Operation is subject to the following two
conditions:
⑵This device must accept any interference received
including interference that may cause undesired
operation.
WARNING : TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT DISASSEMBLE.
NO USER-SERVICEABLE PARTS
WARNING : TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THE
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISKOF ELECTRIC SHOCK
DO NOT OPEN
01
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
02
CAUTION
Warning: Changes or modifcations not expressly
approved in writing by B-bird may void the users
authority to operate this equipment.
RF Exposure Statement: This transmitter must not be
co-located or operated in conjunction with any other
antenna or transmitter.
the antenna used for this transmitter must be installed
to provide a separation distance of at least 20cm from
all persons. end users must be provided with
transmitter operation conditions for satisfying RF
exposure compliance
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and,
03
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which thereceiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
1.Observe all instructions carefully in the O2 manual.
2.Do not to perform service operations beyond those
described in the O2 Manual. Services required when
the apparatus has been damaged in any way, such as:
is dropped or the enclosure is damaged
3.Do not place near heat sources, such as radiators,
heat registers, or appliances which produce heat.
4.Guard against objects or liquids entering the device.
Do not use or place unit near water.
5.Clean only with a damp cloth.
6.Only use attachments/accessories specified by the
manufacturer.
04
WARNING: BEFORE USING YOUR B-BIRD O2
DIGITAL WIRELESS SYSTEM,
CAREFULLY READ THE OPERATING
INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE THESE INSTRUCTIONS
IN A SAFE PLACE
05
PRODUCT INTRODUCTION
B-BIRD O2 guitar system features digital wireless
technology that delivers incredible audio quality, simple
setup, and is extremely reliable for any gigging
musicians. It delivers a full 20 Hz - 20K Hz frequency
response, so you’ll hear your guitar tone in great detail
with only 5ms of latency. This wireless system operates
at 2.4GHz ISM band for crystal clear broadcasting
ensuring the integrity of your signal on stage and covers
100 feet of range without any signal dropout. The li-ion
batteries help makes the O2 wireless system
environmentally friendly that can last up to 5 hours per
charge. The chassis is made out of a durable ABS plastic
that can withstand the rigors of touring and the harshest
of climates. This wireless is a perfect fit for any pedal
board thanks to its simplistic, and compact design. So,
go wireless with the B-BIRD O2 system. It’ll declutter the
stage and offers freedom in motion
7.Prolonged listening at high volume levels may cause
irreparable hearing loss and/or damage. Always be
sure to practice “safe listening.”
06
PACKAGE DETAILS
O2 Guitar Transmitter*1
O2 Guitar Receiver*1
USB cable*1
Manual*1
Range >100 feet Line-0-site outdoors.*
Latency <5ms
Frequency Response 20-20K Hz,+1dB/-3dB
THD + Noise <0.05%(1K Hz @-10dbFS)
Dynamic Range >103dB A weighted
Operating Band 2.4G Hz ISM Worldwide
Operating Temperature -10 C to 50 C
Sample Rate 24bit/48K Hz uncompressed
digital transmission
*Note:
Actual range is dependent on RF environment,
including reflections, interference and absorption
Auto sleep/wake up mode:The transmitter will turn to sleep
mode if there is no signal input for 10 seconds.
SYSTEM SPECIFICATION
07
QUICK START DIAGRAM
1.Transmitter plugs into the Guitar (you instruments),
the receiver plugs into the effects pedal, AMP, Audio,
etc.
2.Turn on the Transmitter and the receiver, the A B C D
LED will indicate how much volume of the battery,
each LED means about 25% of the battery volume.
for example,if A B C D LED all light on,it means
about 100% full volume left,and the like if only A LED
lights on means about 25% of the battery volume left.
if the A LED turn red and flashing,it means the battery
or
or
2
.
4
G
H
z
D
I
G
I
T
A
L
W
I
R
E
L
E
S
S
S
Y
S
T
E
M
O2TRANSMITTER
2
.
4
G
H
z
D
I
G
I
T
A
L
W
I
R
E
L
E
S
S
S
Y
S
T
E
M
O2RECEIVER
08
is in low volume and you have to charge.
3.Channel choosing,O2 systems’pre-set channel is
3.Charging, put the USB plug into the transmitter and
channel A,after showing battery volume the A LED will
flash,it indicates making pairs,if transmitter and receiver
connected successfully the channel LED will stop
flashing and turn solid green. if environment interuption
happens, you can click the “C” button to choose
receiver meanwhile, the A B C D LED will light on
orderly according to the batteries’ volume.
another channel.
09
1.Power
– Slide Switch to turn on/off
TRANSMETER/RECEIVER
BASIC OPERATION
A
B
C
D
A
B
C
D
2.Channel Select - Align TRANSMITTER and
RECEIVER channels.
2
.
4
G
H
z
W
I
R
E
L
E
S
S
G
U
I
T
A
R
S
Y
S
T
E
M
O2TRANSMITTER
2
.
4
G
H
z
W
I
R
E
L
E
S
S
G
U
I
T
A
R
S
Y
S
T
E
M
O2RECEIVER
Indice
Altri manuali BIRD Strumento di misura
BIRD
BIRD Thruline 4304A Manuale utente
BIRD
BIRD 4421A Manuale utente
BIRD
BIRD Thruline 4410 series Manuale utente
BIRD
BIRD Wattcher 3127A Manuale utente
BIRD
BIRD SiteHawk SK-6000-TC Manuale utente
BIRD
BIRD 4314B Manuale utente
BIRD
BIRD 4042 Manuale utente
BIRD
BIRD ACMI Series Manuale utente
BIRD
BIRD THRULINE 4421 Manuale utente
BIRD
BIRD 5000-XT Manuale utente
BIRD
BIRD SiteHawk SK-6000 Manuale utente
BIRD
BIRD THRULINE 4020 series Manuale utente
BIRD
BIRD Thruline 4410A500 Manuale utente
BIRD
BIRD 4308 Manuale utente
BIRD
BIRD 7027 Series Manuale utente
BIRD
BIRD 5000 Manuale utente
BIRD
BIRD SiteHawk SK-9000 Manuale utente
BIRD
BIRD Thruline APM-16 Manuale utente
BIRD
BIRD THRULINE 43 Series Manuale utente
BIRD
BIRD SignalHawk SH-60S-TC Manuale utente
