BITMAIN AntMiner S1 Manuale utente
BITMAIN
S1 Server Manual
S1 Server Manual
Last updated: 11/26/2013
Page 2 of 10
Page 2 / 10
Contents
1 The first glance..........................................................................................................................3
2 Power Supply.............................................................................................................................4
3 Connect to Server ......................................................................................................................4
3.1 WAN setting ..................................................................................................................4
3.2 WIFI setting ...................................................................................................................7
4 Pool Setting ...............................................................................................................................7
5 Server Status..............................................................................................................................8
6 System Configuration ................................................................................................................9
6.1 Password Modification..................................................................................................9
6.2 System Upgrading .........................................................................................................9
S1 Server Manual
Last updated:
11/26/2013 Page 3 of 10
Page 3 / 10
1The first glance
S1 Server is a blade style server, which contains two blades. It has been assembled before Fab
out. Bellow screen shows all S1’s components:
One blade server can work separately, it is showed in bellow:
Notice:
1. You should prepare your own ATX Power Supply.
2. To connect your server via WIFI, you should prepare your own WIFI antenna.
S1 Server Manual
Last updated: 11/26/2013
Page 4 of 10
Page 4 / 10
2Power Supply
Connect the 12V Power line to the Power Supply socket. Note not to reverse positive (+12V) to
negative (GND).
3Connect to Server
3.1 WAN setting
Step 1. Read the IP address labeled in the Fan Bracket (Front). Manually set up your PC’s
IP address in the network segment same as the server’s IP address.
S1 Server Manual
Last updated: 11/26/2013
Page 5 of 10
Page 5 / 10
Step 2. Connect server and your PC via network cable.
Step 3. Enter server’s IP address into your web browser, then login server management
interface, both of username and password is ‘root’ by default.
Step 4. Set LANas DHCP client. Click “Network->Interface->LAN”, select DHCP client as
the following page, and then click “Switch Protocol“, and then click ”Save & Apply”. The default
LAN value of the first several batch is fixed to 192.168.1.1, and WAN address can’t be
set as 192.168.1.x, otherwise the server can’t be accessed. If your server’s LAN is set as
DHCP by default, please ignore this step.
S1 Server Manual
Last updated: 11/26/2013
Page 6 of 10
Page 6 / 10
Step 5. Modify the IP address of the WAN interface. Click “Network->Interface->WAN” to modify
the IP address of WAN in the following page.
Note:
1. WAN and LAN can’t be at the same network segment. Please set WAN to DHCP client
or different network segment with WAN. The LAN of new version of server will be set to
DHCP by default.
2. If you set fixed IP to WAN interface, please remember it, otherwise you may not access
the server.
S1 Server Manual
Last updated: 11/26/2013
Page 7 of 10
Page 7 / 10
3.2 WIFI setting
There is WIFI built in the server, and it can be used to connect to the Ethernet via another
WIFI hot point. Note: Bad WIFI performance will reduce the server’s hash rate. You have to
prepare the WIFI antenna by yourself.
Through “Network->Wifi“you can click ”Scan“ and then add the exist WIFI signals in your
enviornment.
4Pool Setting
Through ‘Status->Configuration ‘, you will be able to configure your server.
Pool URL- you should enter the URL of your desired pool.
Worker- this is your worker ID on the selected pool.
Password- this is the password for your selected worker. In general password can be set casually.
Comment: The server can set up three mine pools, the priority decreases from first pool (pool
1) to third pool (pool 3). The low priority pool will start to work, only when the high priority
pool encounter fault.
S1 Server Manual
Last updated: 11/26/2013
Page 8 of 10
Page 8 / 10
5Server Status
Click the status marked below, you will be able to check your server running status.
ASIC#: ASIC number in the chain
Fan: Fan speed
Temp: Temperature, centigrade
Frequency: ASIC setting frequency
ASIC status: o stands for OK, x stands for error.
S1 Server Manual
Last updated: 11/26/2013
Page 9 of 10
Page 9 / 10
6System Configuration
6.1 Password Modification
Through ‘System->Administration’, you will be able to modify the server login password,
and choose ‘Save’and ‘Save and Apply’after modifying it.
6.2 System Upgrading
Through ‘System->Backup / Flash Firmware’you will be able to upgrade your server.
‘Keep setting’is chosen by default, you should choose it if you hope to preserve the current
settings. You should cancel this option if you hope to restore to initial settings.
Click ‘Browse’button to choose upgrade file. After choosing upgrade file, then click ’Flash image...’
button to start downloading this file to your system. After downloading, please click ‘Proceed’
button, then upgrade system. During the upgrade process, you need to wait patiently, and
must keep power on, otherwise, the server will restore to initial settings. The server will be
connected to login interface after finishing system upgrade.
Page 10 / 10
Last updated: 11/26/2013
Page 9 of 10
S1 Server Manual
Altri manuali per AntMiner S1
1
Indice
Altri manuali BITMAIN Server
BITMAIN
BITMAIN ANTMINER S19a Pro Manuale utente
BITMAIN
BITMAIN AntMiner L3+ Manuale utente
BITMAIN
BITMAIN ANTMINER S19 Pro Manuale utente
BITMAIN
BITMAIN S5 Manuale utente
BITMAIN
BITMAIN ANTMINER S17+ Manuale utente
BITMAIN
BITMAIN C1 Manuale utente
BITMAIN
BITMAIN AntMiner S4 Manuale utente
BITMAIN
BITMAIN ANTMINER T17e Manuale utente
BITMAIN
BITMAIN ANTMINER 19 Series Manuale utente
BITMAIN
BITMAIN ANTMINER T17+ Manuale utente
BITMAIN
BITMAIN ANTMINER S19j Pro Server Manuale utente
BITMAIN
BITMAIN ANTMINER S19 Pro+ Hydro Manuale utente
BITMAIN
BITMAIN R4 Manuale utente
BITMAIN
BITMAIN AntMiner D3 Manuale utente
BITMAIN
BITMAIN ANTMAINER S19j Server Manuale utente
BITMAIN
BITMAIN AntMiner L3+ Manuale utente
BITMAIN
BITMAIN ANTMINER S19j Manuale utente
BITMAIN
BITMAIN S4+ Manuale utente
BITMAIN
BITMAIN ANTMINER S17e Manuale utente
BITMAIN
BITMAIN ANTMINER T19 Manuale utente
