BITMAIN S5 Manuale utente

BITMAIN

S5 Server Manual

Last updated: 3/26/2015

Page 2 of 11

Page 2 / 11

Contents

1Overview .......................................................................................................................................... 3

2Features ........................................................................................................................................... 3

3Power Supply................................................................................................................................... 4

4Connect to Server............................................................................................................................ 4

5Server Configuration ........................................................................................................................ 7

5.1 Pool Setting......................................................................................................................... 7

5.2 Frequency Modification..................................................................................................... 7

5.3 Server Link Connection........................................................................................................ 7

6Server Status..................................................................................................................................... 8

7System Configuration and status.................................................................................................... 9

7.1 System Upgrading............................................................................................................... 9

7.2 Password Modification....................................................................................................... 9

7.3 Software Version Checking .............................................................................................. 10

7.4 Restore Initial Setting ....................................................................................................... 10

S5 Server Manual

Last updated: 3/26/2015

Page 3 of 11

Page 3 / 11

Overview

The S5 server is Bitmain’s 5th generation of Bitcoin mining rig and uses the state-of-the-art

BM1384 chip powered by ultra-low power 28nm technology. S5’s are tested and configured

prior to shipping to make it easier for customers to set up.

Please note:

1. You must prepare your own ATX Power Supply

Features

Ideal Hash Rate (GH/s)

1155

Default chip clock (M)

350

Input Voltage (V)

12.00 ~ 12.50

Typical Input Current (A)

Typical Input Power (W)

540

Estimate power on wall (W) -- assume AC/DC

efficiency is 90%

590

Estimate efficiency on wall (W/GH)

0.51

Dimensions (mm)

298 x 137 x 155

Weight (kg)

3.5

Operating ambient temperature (°C)

0 ~ 35

Notes: Input voltage should not be less than 12.00V, since it is based on serial power solution

and there is no DC/DC inside the server. Higher input voltage will cause higher mining efficiency.

S5 Server Manual

Last updated: 3/26/2015

Page 4 of 11

Page 4 / 11

Power Supply

Each S5 server has four PCI-e connectors for +12V/15A DC STABLE input and all four are

required. Do not connect more than one PSU to the same hashing board to prevent

possible damage and instability. See below screenshot for the CORRECT and INCORRECT

connection of the PCI-E connectors:

Correct connection:

Incorrect connection:

Connect to Server

Step 1. The default DHCP network protocol distributes IP addresses automatically. Please

download IPReporter.zip from serverlink.com, then please follow below steps to find out the IP

of the server.

1. Extract the file and double click ‘IPReporter.exe’.

The ‘Shelf, Step, Position’ options are suitable for farm servers to mark the location

of the servers. For home servers, it can be left as default.

Then click ‘Start’.

S5 Server Manual

Last updated: 3/26/2015

Page 5 of 11

Page 5 / 11

2. Press the IP Reporter button on IO board and you’ll hear a beepsound:

3. Check your PC, you’ll see the IP address showing in the pop-up window.

S5 Server Manual

Last updated: 3/26/2015

Page 6 of 11

Page 6 / 11

Step 2. Enter the IP address provided into your WEB browser and proceed to login using ‘root’ for

both the username and password.

In the ‘Network’ section, you can assign a ‘Static’ IP address if you like. Click ‘Save&Apply’ after

modifying it.

Page 7 / 11

S5 Server Manual

Last updated: 3/26/2015

Page 7 of 11

Server Configuration

5.1 Pool Setting

You can configure your serverthrough General Settings marked below.

Pool URL- Enter the URL of your desired pool in this column.

Worker- This is your worker ID on the selected pool.

Password- This is the password for your selected worker.

Comment:

4.1.1 The S5 server can be set up with three mining pools, with decreasing priority from the

first pool (pool 1) to the third pool (pool 3). The pools with low priority will only be used if all

higher priority pools have gone offline.

4.1.2 When ‘Beeper ringing’ is checked, a beeper will ring when the server stops mining,

otherwise it won’t ring even if the server stopsmining.

4.1.3 When ‘Stop running when temperature is over 80℃’is checked, the server will stop mining

when the temperature exceeds 80℃ to protect the server. If it’s unchecked, the server will still

mine even in high temperature.

Click ‘Save & Apply’ to save and restart server.

5.2

FrequencyModification

You are able to modify the frequency value through Advanced Settings marked below. The

default frequency for the S5 server is 350M.

5.3

Server Link Connection

4.3.1 Go to ‘ Configuration’ tab, and the ‘Link’ tab in order to configure the relevant settings.

4.3.2 You can enable or disable ‘Link’ in the Off/On drop-down list provided. You can fill in your

Bitmain username(your passport email registered on Bitmain platform) in the UID blank.

(Register here if you don’ have an account yet: http://passport.bitmain.com)

4.3.3 After filling in your Bitmain username and enabling ‘Link’, click ‘Save&Apply’ tab. The

S5 Server Manual

Last updated: 3/26/2015

Page 8 of 11

Page 8 / 11

software will take approximately 10 seconds to connect to the server, and then the client

software continues to run after settings are saved. If either the Off/On is selected to ‘OFF’ or

the UID is left blank, ‘Link’ will remain disabled.

4.3.4 Once ‘Link’ is enabled, the ‘Addr’ will become fixed and cannot be updated by

customers. This refers to Bitmain’s monitoring server address.

6Server Status

You can check the operating status of your server on ‘Status’ page.

ASIC#: Number of chips detected in the chain

Frequency: ASIC frequency setting

Temp: Temperature, centigrade

ASIC status: o stands for OK, x stands for error.

S5 Server Manual

Last updated: 3/26/2015

Page 9 of 11

Page 9 / 11

7System Configuration and status

7.1

System Upgrading

You can upgrade he server’s firmware on ‘System->Upgrade’ page.

‘Keep setting’ is chosen by default and should be enabled if you want to keep your current

settings. You should deselect this option if you are trying to return the server to default settings.

Click ‘Browse’ button to choose upgrade file. Select the upgrade and click the ’Flash image...’

button. The interface will display if the firmware can be upgraded and download the software.

During the upgrade process, you need to wait patiently, and must keep power on, otherwise,

the server can only be fixed with returned to factory. You will see below screenshot after

upgrading successfully.

Clicking the ‘Reboot’ button will restart the server so it can load the new software. Clicking

‘Go Back’ will keep the server mining, before switching to the new software when it is

restarted next time or power cycled.

7.2

Password Modification

The server login password can be changed on the ‘System->Administration’ page. Once modified,

press ‘Save and Apply’ to save the new password.

S5 Server Manual

Last updated: 3/26/2015

Page 10 of 11

Page 10 / 11

7.3

Software Version Checking

You can check which version of the software you are currently running on the ‘System->Overview’

page. ‘File System version’ displays the date of the firmware your server use. In the example

below, the server is using 20141218 firmware.

7.4

Restore Initial Setting

There is a ‘Reset’ button on the right hand side of the Ethernet port, next to the green and red

LED light, press and hold the button for 5 seconds in order to restore to the default settings and

reboot. The red LED will flash once every 15 seconds automatically if the reset is operated

successfully.

Altri manuali per S5

Indice

Altri manuali BITMAIN Server

BITMAIN

BITMAIN ANTMINER S19 Pro Manuale utente

BITMAIN

BITMAIN AntMiner L3+ Manuale utente

BITMAIN

BITMAIN AntMiner S4 Manuale utente

BITMAIN

BITMAIN ANTMINER S19a Manuale utente

BITMAIN

BITMAIN ANTMINER 19 Series Manuale utente

BITMAIN

BITMAIN ANTMINER T17+ Manuale utente

BITMAIN

BITMAIN ANTMINER T17e Manuale utente

BITMAIN

BITMAIN ANTMINER S17+ Manuale utente

BITMAIN

BITMAIN ANTMAINER S19j Server Manuale utente

BITMAIN

BITMAIN R4 Manuale utente

BITMAIN

BITMAIN S4+ Manuale utente

BITMAIN

BITMAIN T19 Hydro Server Manuale utente

BITMAIN

BITMAIN ANTMINER S19j Pro Server Manuale utente

BITMAIN

BITMAIN ANTMINER T19 Manuale utente

BITMAIN

BITMAIN AntMiner D3 Manuale utente

BITMAIN

BITMAIN AntMiner L3+ Manuale utente

BITMAIN

BITMAIN ANTMINER S19 Pro+ Hydro Manuale utente

BITMAIN

BITMAIN C1 Manuale utente

BITMAIN

BITMAIN ANTMINER S17e Manuale utente

BITMAIN

BITMAIN ANTMINER S19j Manuale utente

BITMAIN

BITMAIN ANTMINER S19a Pro Manuale utente

BITMAIN

BITMAIN AntMiner S1 Manuale utente

BITMAIN

BITMAIN AntMiner Z9 Manuale utente

BITMAIN

BITMAIN Antminer T9 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente