Black Box Elite II Series Manuale utente

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

CUSTOMER

SUPPORT

INFORMATION

AUGUST 2004

RM4000 RM4208

RM4100A RM4209

RM4200A RM4210

RM4205 RM4211

RM4206 RM411

RM4207

Elite II Server Cabinet

TRADEMARKS USED IN THIS MANUAL

Compaq is a registered trademark of Compaq Computer Corporation.

HP is a registered trademark of Hewlett-Packard.

Sun is a registered trademark of Sun Microsystems.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

ELITE II SERVER CABINET

Contents

Chapter Page

1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.3 The Elite II Server Cabinet Illustrated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.1 The Elite II Server Cabinet (RM4100A or RM4200A). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.2 EIA Rail Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.3 Vertical Cable Management (RM4205) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.4 Waterfall Cable Management (RM4206) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.5 Horizontal Cable Management (RM4207). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.6 Heavy-Duty Sliding Adjustable Shelf (RM411) and Other Optional Accessories . . . . . . . . . . . . . . . . 11

3.7 Adapter Brackets (RM4208–RM4210) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.8 Anti-Tip Leg Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.9 Top Fan Panel (RM4000 or RM4211). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Appendix. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

A.1 Calling Black Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

A.2 Shipping and Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

CHAPTER 1: Specifications

1. Specifications

Material: Frame: 14 AWG steel;

Side/doors: 18 AWG steel;

Corner posts: 14 AWG steel;

Mounting rails: 12 AWG steel

Rack Spaces: 44U

Weight Capacity: 1800 lb. (816.5 kg) on casters

Maximum Rail Spacing: Front to rear, 36" (91.4 cm)

Anchoring Holes: 3⁄4"

Standard Center Opening: RM4200A: 11.75"W x 14.75"D (29.8 x 37.5 cm);

RM4100A: 14.75"W x 4"D (37.5 x 10.2 cm)

Bottom Rear Opening: RM4200A: 24"W x 3.75"D (61 x 9.5 cm);

RM4100A: 19"W x 3.75"D (48.3 x 9.5 cm)

Opening Next to the Rear Opening: RM4200A: 13.5"W x 4"D (34.3 x 10.2 cm);

RM4100A: 8.5"W x 3.9"D (21.6 x 9.9 cm)

Knockouts: (3) 2.5" x 6" (6.4 x 15.2 cm) on the rear corner posts’ sides;

(2) 2.5" x 6" (6.4 x 15.2 cm) on the enclosure’s top back

Mounting Rails: (3) pairs of adjustable M6 rails are included

Interior Width: RM4100A: 23.75" (60.3 cm);

RM4200A: 28.75" (73 cm)

Exterior Width: RM4100A: 24" (61 cm);

RM4200A: 29" (73.7 cm)

Interior Height: 82" (208.3 cm)

Exterior Height: 84" (213.4 cm)

Interior Depth: 40" (101.6 cm)

Exterior Depth: 42" (106.7 cm)

Door Opening Width: RM4200A: 24.5" (62.2 cm);

RM4100A: 19.7" (50 cm)

Door Opening Height: 78" (198.1 cm)

Weight: RM4100A: 455 lb. (206.4 kg);

RM4200A: 450 lb. (204.1 kg)

ELITE II SERVER CABINET

2. Introduction

2.1 Overview

Mount a variety of multi-vendor servers in the same rack with the Elite II Server Cabinet. It includes three pairs

of adjustable M6 rails that can accept “server-specific” side mounting adapters for HP®, Compaq®, and Sun®.

The cabinet can hold up to 1800 lb. (816.5 kg) on casters. Its door swings out 180°, lifts off, and is reversible.

The cabinet has generous cable access. Cables can enter the enclosure through three locations: an opening in

the bottom rear, an opening next to the rear opening, or the standard center opening. A cable loop lance at

the bottom rear opening allows you to secure your incoming cable.

The rear corner posts’ sides have three 2.5" x 6" (6.4 x 15.2 cm) knockouts. The enclosure’s top back has two

2.5" x 6" (6.4 x 15.2 cm) knockouts. The cabinet also has retractable anti-tip legs.

To network cabinet frames, remove the side panels, then the knockouts on the side, then the two plastic plugs

on the frame to expose the two holes in the frame. Simply bolt the cabinet frames together through these holes

with ordinary 1⁄4-20 hardware (not supplied).

The cabinet features split side panels, which are lighter for easier handling. Center side posts provide increased

strength between side panels.

Optional accessories include cable management, sliding adjustable or fixed shelves, sliding server shelf,

pivoting keyboard tray, top fan panels, and adapter brackets for Compaq, HP, or Sun.

2.2 Features

• Includes three pairs of adjustable M6 rails.

• Maximum rail spacing (front to rear) of 36" (91.4 cm).

• Rails accept multi-vendor “server-specific” side mounting adapters.

• Front and rear doors and top panel have mesh panel inserts for ventilation.

• Convenient 3⁄4" anchoring holes allow easy access for bolting the cabinet to the floor.

• Power strip is included.

CHAPTER 2: Introduction

2.3 The Elite II Server Cabinet Illustrated

28.75" (73 cm)

29" (73.7 cm)

82" (208.3 cm)

84" (213.4 cm)

40" (101.6 cm)

42" (106.7 cm)

24.5" (62.2 cm)

78" (198.1 cm)

23.75" (60.3 cm)

24" (61 cm)

82" (208.3 cm)

84" (213.4 cm)

40" (101.6 cm)

42" (106.7 cm)

19.7" (50 cm)

78" (198.1 cm)

RM4200A

RM4100A

ELITE II SERVER CABINET

3. Installation

3.1 Elite II Server Cabinet (RM4100A or RM4200A)

The Elite II Server Cabinet arrives fully assembled. (See the illustration on the previous page.)

3.2 EIA Rail Adjustment

To adjust the rail location:

1. Loosen one of the 1⁄4-20 bolts approximately 1⁄2turn with a 7⁄16" wrench as shown in Figure 3-1. Don’t remove

the bolt. Loosen the other bolt.

2. Slide the rail to the desired position. Use the reference marks (see Figure 3-1) for convenience.

3. Re-tighten the bolts.

NOTE

If your equipment requires an EIA rail spacing of 291⁄4" and the rails are in the original

factory position, move the front rail forward 3". This will position the front rails

approximately 31⁄2" from the front of the enclosure and 291⁄4" from the rear rails.

Figure 3-1. EIA rail adjustment.

If 291⁄4" rail spacing is required, adjust the

front rails forward to this position (face of

rail to be even with this mark)

This reference mark is approximately

11⁄2" from the front of the enclosure

1⁄4-20 hex-head bolt; use a

7⁄16" wrench to adjust

Key way for

hex-head bolt to

pass through for

installing and

removing EIA

rail only

Mounting

holes for

server adapter

brackets

EIA unit numbers stamped

into face of rail

Rail location reference marks;

upper and lower marks are

offset by 1⁄2" (front to rear)

Slots for securing cable

EIA rail

CHAPTER 3: Installation

3.3 Vertical Cable Management (RM4205)

The Elite II Server Cabinet Vertical Cable Management (RM4205) can be mounted in each of the enclosure’s

four corners. It does not interfere with other equipment or options such as vertical power strips or EIA rail

mounting.

Figure 3-2. Vertical Cable Management (RM4205) mounting.

Tapped holes in cabinet

Untapped holes in corner post

on same surface as door hinges Vertical Cable Management (RM4205)

Vertical Cable Management (RM4205)

#10-32 screws

ELITE II SERVER CABINET

3.4 Waterfall Cable Management (RM4206)

The Waterfall Cable Management (RM4206) manages cables from side to side across the enclosure’s inside top.

The unit can be mounted inside the enclosure’s top front and top rear.

INSTALLATION INSTRUCTIONS

1. Position the unit as shown in Figure 3-3.

Figure 3-3. Inside view.

2. Pass the two slots in the Waterfall Cable Management over the two short studs in the enclosure’s top. See

Figure 3-4.

Figure 3-4. The enclosure’s top.

Waterfall Cable Management (RM4206)

#10-32 threaded studs inside

top, front, and rear

#10-32 hex nuts with

captive lockwashers

Waterfall Cable

Management (RM4206)

CHAPTER 3: Installation

3. Fasten the Waterfall Cable Management with two #10-32 hex nuts. Use a 3⁄8" wrench or nut driver to tighten

them. See Figure 3-5.

Figure 3-5. Front view.

Waterfall Cable Management

(RM4206)

#10-32 hex nuts with captive

lockwashers; use a 3⁄8" wrench

or nut driver to tighten

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Black Box Server

Black Box

Black Box LES1101A-R2 Manuale utente

Black Box

Black Box LES1516A Manuale utente

Black Box

Black Box LS50116-R3 Manuale utente

Black Box

Black Box LES1108A Manuale utente

Black Box

Black Box LWS401A Manuale utente

Black Box

Black Box Terminal Server Manuale utente

Black Box

Black Box LES1108A Manuale utente

Black Box

Black Box LES2700A-16-R2 Manuale utente

Black Box

Black Box iCOMPEL ICC LG WEBOS 3 Manuale utente

Black Box

Black Box Advanced Console Server Manuale utente

Black Box

Black Box RM5000A-R3 Manuale utente

Black Box

Black Box LES401A Manuale utente

Black Box

Black Box LES1516A Manuale utente

Black Box

Black Box LE2101A-BT-R2 Manuale utente

Black Box

Black Box LES2700A-SSS Manuale utente

Black Box

Black Box LES431A Manuale utente

Black Box

Black Box LRA502A-ET-R5 Manuale utente

Black Box

Black Box LES290A Manuale utente

Black Box

Black Box CDUNM10 Manuale utente

Black Box

Black Box ME0008A-ME1 Manuale utente

Black Box

Black Box leS1116a Manuale utente

Black Box

Black Box ServShield RM470A-R2 Manuale utente

Black Box

Black Box LES301A-KIT Manuale utente

Black Box

Black Box LRA 2900 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente