Bosch NDC-455 Manuale utente

FlexiDome IP Camera

NDC-455

en Installation and Operation Manual

FlexiDome IP Camera Table of Contents | en 3

Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06

Table of Contents

1Safety 8

1.1 Safety precautions 8

1.2 Important safety instructions 9

1.3 Connection in applications 10

1.4 FCC & ICES compliance 11

1.5 UL certification 13

1.6 Bosch notices 14

1.7 Copyrights 15

2 Introduction 16

2.1 Features 16

3 System Information 18

3.1 Overview of functions 18

3.1.1 Progressive scan 18

3.1.2 Tri-streaming 18

3.1.3 ONVIF (Open Network Video Interface Forum) 18

3.1.4 Audio 18

3.1.5 Alarm I/O 18

3.1.6 Tamper detection and motion detectors 19

3.1.7 Impact-resistant dome with tamper-resistant housing 19

3.1.8 Video encoding 19

3.1.9 Multicast 19

3.1.10 Power-over-Ethernet 19

3.1.11 Encryption 19

3.1.12 Receiver 20

3.1.13 Recording 20

3.1.14 Snapshots 20

3.1.15 Backup 20

3.1.16 Configuration 20

3.2 Operation with external systems 21

4en | Table of Contents FlexiDome IP Camera

AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

4 Planning 23

4.1 Unpacking 23

4.2 System requirements 24

4.3 Install players 25

5 Installation 26

5.1 Disassembly 26

5.1.1 Surface mount version 26

5.1.2 Flush mount version 27

5.2 Mounting the unit 28

5.2.1 Surface mount 29

5.2.2 Flush mount 30

5.2.3 Make the connections 31

5.2.4 Indication LED 33

5.2.5 Reset button 33

5.2.6 Mount the camera 33

5.3 Camera positioning 34

5.3.1 Focal length and focus 35

5.3.2 Closing the unit 36

6 Camera set-up 37

6.1 Camera menu navigation 37

6.2 Install menu 38

6.2.1 Network submenu 39

6.2.2 Defaults submenu 39

6.2.3 Lens Wizard submenu 40

7 Browser connection 41

7.1 System requirements 41

7.2 Establishing the connection 42

7.2.1 Password protection in camera 42

7.3 Protected network 42

7.4 Connecting to a hardware decoder 43

7.4.1 Alarm connection 43

7.5 Connection established 44

FlexiDome IP Camera Table of Contents | en 5

Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06

7.5.1 LIVEPAGE 44

7.5.2 RECORDINGS 44

7.5.3 SETTINGS 44

8 Basic Mode 46

8.1 Basic Mode menu tree 46

8.2 Device Access 47

8.2.1 Camera name 47

8.2.2 Password 47

8.3 Date/Time 48

8.4 Network 49

8.5 Encoder Profile 50

8.6 Audio 50

8.7 Recording 50

8.7.1 Storage medium 50

8.8 System Overview 50

9 Advanced Mode 51

9.1 Advanced Mode menu tree 51

9.2 General 53

9.2.1 Identification 53

9.2.2 Password 53

9.2.3 Date/Time 54

9.2.4 Display Stamping 56

9.3 Web Interface 58

9.3.1 Appearance 58

9.3.2 LIVEPAGE Functions 59

9.3.3 Logging 60

9.4 Encoder 61

9.4.1 Privacy Masks 61

9.4.2 Encoder Profile 61

9.4.3 Encoder Streams 65

9.5 Audio 66

9.6 Camera 67

9.6.1 ALC 67

9.6.2 Enhance 68

6en | Table of Contents FlexiDome IP Camera

AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

9.6.3 Color 68

9.6.4 Installer Options 69

9.7 Recording 70

9.7.1 Storage Management 70

9.7.2 Recording Profiles 73

9.7.3 Retention Time 74

9.7.4 Recording Scheduler 75

9.7.5 Recording Status 76

9.8 Alarm 77

9.8.1 Alarm Connections 77

9.8.2 Video Content Analyses (VCA) 80

9.8.3 VCA configuration- Profiles 81

9.8.4 VCA configuration - Scheduled 87

9.8.5 VCA configuration - Event triggered 89

9.8.6 Audio Alarm 90

9.8.7 Alarm E-Mail 91

9.8.8 Alarm Task Editor 93

9.9 Interfaces 94

9.9.1 Alarm input 94

9.9.2 Relay 94

9.10 Network 96

9.10.1 Network 96

9.10.2 Advanced 100

9.10.3 Multicasting 101

9.10.4 JPEG Posting 102

9.10.5 Encryption 103

9.11 Service 104

9.11.1 Maintenance 104

9.11.2 Licenses 106

9.11.3 System Overview 106

10 Operation via the browser 107

10.1 Livepage 107

10.1.1 Processor load 107

10.1.2 Image selection 108

10.1.3 Digital I/O 108

FlexiDome IP Camera Table of Contents | en 7

Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06

10.1.4 System Log / Event Log 108

10.1.5 Saving snapshots 108

10.1.6 Recording video sequences 108

10.1.7 Running recording program 109

10.1.8 Audio communication 109

10.2 Recordings page 110

10.2.1 Controlling playback 110

11 Troubleshooting 112

11.1 Function test 112

11.2 Resolving problems 113

11.3 Customer service 115

12 Maintenance 116

12.1 Testing the network connection 116

12.2 Repairs 116

12.2.1 Transfer and disposal 116

13 Technical Data 117

13.1 Specifications 117

13.1.1 Dimensions 120

13.1.2 Accessories 122

Glossary 123

8en | Safety FlexiDome IP Camera

AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

1Safety

1.1 Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the unit.

FlexiDome IP Camera Safety | en 9

Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06

1.2 Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Follow all warnings on the unit and in the

operating instructions before operating the unit.

1. Clean only with a dry cloth. Do not use liquid cleaners or

aerosol cleaners.

2. Do not install unit near any heat sources such as radiators,

heaters, stoves, or other equipment (including amplifiers)

that produce heat.

3. Never spill liquid of any kind on the unit.

4. Take precautions to protect the unit from power and

lightning surges.

5. Adust only those controls specified in the operating

instructions.

6. Operate the unit only from the type of power source

indicated on the label.

7. Unless qualified, do not attempt to service a damaged unit

yourself. Refer all servicing to qualified service personnel.

8. Install in accordance with the manufacturer's instructions

in accordance with applicable local codes. Use only

attachments/accessories specified by the manufacturer.

Equipment change or modification could void the user's

guarantee or authorization agreement.

10 en | Safety FlexiDome IP Camera

AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

1.3 Connection in applications

Power lines: An outdoor system should not be located in the

vicinity of overhead power lines, electrical lights, or power

circuits, or where it may contact such power lines or circuits.

When installing an outdoor system, extreme care should be

taken to keep from touching power lines or circuits, as this

contact may be fatal.

U.S.A. models only - refer to the National Electrical Code Article

820 regarding installation of CATV systems.

12 VDC / 24 VAC power source: This unit is intended to

operate with a limited power source. The unit is intended to

operate at either 12 VDC or 24 VAC (if PoE is not available).

User supplied wiring must be in compliance with electrical

codes (Class 2 power levels). If 24 VAC is used, do not ground

the 24 VAC supply at the terminals or at the unit's power supply

terminals.

PoE: Use only approved PoE devices. Power-over-Ethernet can

be connected at the same time as a 12 VDC or 24 VAC power

supply.

Earth connection: The unit must be connected to earth.

Connection: The unit has connection terminals on flying leads.

In wet or outdoor installations make use of a field wiring box

and cable conduit with Nema3 or IP55 protection level or

better. Make the connections inside the water tight

compartment. After connections are made ensure that the

watertight compartment is tightly closed and cables and

conduits are properly sealed to prevent ingress of water.

CAUTION!

The Low Voltage power supply unit must comply with EN/UL

60950. The power supply must be a SELV-LPS unit or a SELV -

Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

Altri manuali per NDC-455

Indice

Altri manuali Bosch Telecamera IP

Bosch

Bosch MIC IP ultra 7100i Manuale utente

Bosch

Bosch NWD-455 FlexiDome Manuale utente

Bosch

Bosch DinionHD NBN-832 Manuale utente

Bosch

Bosch NFN-70122 Manuale utente

Bosch

Bosch TC9376H Manuale utente

Bosch

Bosch AUTODOME 7100i Manuale utente

Bosch

Bosch MIC IP fusion 9000i Manuale utente

Bosch

Bosch EX85 Manuale utente

Bosch

Bosch NBC-225-P Manuale utente

Bosch

Bosch MIC-71 series Manuale utente

Bosch

Bosch FlexiDome NDN-498V03-21P Manuale utente

Bosch

Bosch NDP-5512-Z30 Manuale utente

Bosch

Bosch NDC-225-PI Manuale utente

Bosch

Bosch MIC-7130 Manuale utente

Bosch

Bosch DINION 4000 Manuale utente

Bosch

Bosch NDC-265-P Manuale utente

Bosch

Bosch NDC-455 Manuale utente

Bosch

Bosch FLEXIDOME IP panoramic 6000 IC Manuale utente

Bosch

Bosch 200 Series Manuale utente

Bosch

Bosch NWC-0495-20P Manuale utente

Bosch

Bosch FLEXIDOME IP NIN-70122 Manuale utente

Bosch

Bosch DinionHD NBN-921 Manuale utente

Bosch

Bosch NBC-255-P Manuale utente

Bosch

Bosch AN traffic 4000 IR Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente