Bosch GLM 40 Istruzioni per il montaggio

IMPORTANT: IMPORTANT: IMPORTANTE:

Read Before Using Lire avant usage Leer antes de usar

Operating/Safety Instructions

Consignes d’utilisation/de sécurité

Instrucciones de funcionamiento y

seguridad

1-877-BOSCH99 (1-877-267-2499) www.boschtools.com

Call Toll Free for

Consumer Information

& Service Locations

Pour obtenir des informations

et les adresses de nos centers

de service après-vente,

appelez ce numéro gratuit

Llame gratis para

obtener información

para el consumidor y

ubicaciones de servicio

For English Version Version française Versión en español

See page 5 Voir page 21 Ver la página 38

GLM 40

-2-

432

12 11

a b

-3-

-4-

1.5 ft

1 ft

2. 3.

-5-

General Safety Rules

WARNING

Read all instructions. Failure to follow all

instructions listed below may result in

hazardous radiation exposure, electric shock, fire and/or

serious injury.

The term “tool” in the warnings listed below

refers to your mains-operated (corded) tool or battery-operated

(cordless) tool.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

The following label is on your laser

tool for your safety. ALWAYS BE

AWARE of its location when using

the tool.

DO NOT direct the

laser beam at persons

or animals and do not

stare into the laser beam yourself. This tool

produces class 2 laser radiation and complies

with 21 CFR 1040.10 and 1040.11 except for deviations

pursuant to Laser Notice No. 50, dated June 24, 2007. This

can lead to persons being blinded.

Safety Rules

Working safely with the

measuring tool is possible

only when the operating

and safety information

are read completely and

the instructions contained

therin are strictly followed.

Never make warning labels

on the Measuring tool

unrecognizable.

Never aim the beam at a

workpiece with a reflective

surface. Bright shiny

reflective sheet steel or

similar reflective surfaces are

not recommended for laser

use.

Reflective surfaces could

direct the beam back towards the

operator.

Take care to recognize the

accuracy and range of the

device.

Measurement may not

be accurate if used beyond the

rated range of the device.

Use of controls or

adjustments or performance

of procedures other than

those specified herein may

-6-

result in hazardous radiation

exposure.

The use of optical

instruments with this product

will increase eye hazards.

Have the measuring tool

repaired only through

qualified specialist using

original spare parts.

This

ensures that the safety of the

measuring tool is maintained.

Do not allow children to use

the measuring tool without

supervision.

They could

unintentionally blind other

persons.

Do not point the laser beam

at persons or animals and do

not look into the laser beam

yourself, not even from a

large distance.

Do not use the laser viewing

glasses as safety goggles.

The laser viewing glasses are

used for improved visualization of

the laser beam, but they do not

protect against laser radiation.

Do not use the laser viewing

glasses as sun glasses or

in traffic.

The laser viewing

glasses do not afford complete

UV protection and reduce color

perception.

Be sure to read and

understand all instructions

in this manual before using

this product.

Failure to follow

all instructions may result in

hazardous radiation exposure,

electric shock, fire, and/or bodily

injury.

Use of controls or

adjustments or performance

of procedures other

than those specified in

this manual, may result

in hazardous radiation

exposure.

The use of optical

instruments with this product

will increase eye hazard.

ALWAYS: Make sure that any

bystanders in the vicinity of

use are made aware of the

dangers of looking directly

into the measuring tool.

DO NOT remove or deface

any warning or caution

labels. Removing labels

increases the risk of

exposure to laser radiation.

DO NOT stare directly at the

laser beam or project the

laser beam directly into the

eyes of others.

Serious eye

injury could result.

DO NOT place the measuring

tool in a position that may

cause anyone to stare into

the laser beam intentionally

or unintentionally.

Serious eye

injury could result.

Safe Operating Procedures

-7-

DO NOT use any optical tools

such as, but not limited to,

telescopes or transits to view

the laser beam.

Serious eye

injury could result.

ALWAYS remove the

batteries when cleaning the

laser light aperture to laser

lens.

DO NOT operate the

measuring tool around

children or allow children to

operate the measuring tool.

Serious eye injury could result.

ALWAYS turn the measuring

tool “OFF” when not in use.

Leaving the measuring tool “ON”

increases the risk of someone

inadvertently staring into the

laser beam.

DO NOT operate the

measuring tool in

combustible areas such as

in the presence of flammable

liquids, gases or dust.

ALWAYS position the

measuring tool securely.

Damage to the measuring tool

and/or serious injury to the user

could result if the measuring tool

falls.

ALWAYS use only the

accessories that are

recommended by the

manufacturer of your

measuring tool.

Use of

accessories that have been

designed for use with other

measuring tools could result in

serious injury.

DO NOT leave measuring

tool “on” unattended in any

operation mode.

Repair and servicing must

always be performed by

a qualified repair facility.

Repairs performed by unqualified

personnel could result in serious

injury.

DO NOT use this measuring

tool for any purpose other

than those outlined in this

manual.

This could result in

serious injury.

DO NOT disassemble the

measuring tool. There are no

user serviceable parts inside.

Disassembling the laser will

void all warranties on the

product. Do not modify the

product in any way.

Modifying

the measuring tool may result

in hazardous laser radiation

exposure.

Electrical safety

Batteries can explode or leak,

cause injury or fire. To reduce

this risk, always follow all

instructions and warnings on

the battery label and package.

DO NOT short any battery

terminals.

DO NOT charge alkaline

batteries.

DO NOT mix old and new

batteries. Replace all of them

at the same time with new

batteries of the same brand

and type.

-8-

The measuring tool is intended for measuring distances, lengths,

heights and clearances. The measuring tool is suitable for

measuring indoors.

Warning Symbol

Alerts user to warning

messages

Read Manual Symbol

Alerts user to read

manual

Intended Use

Symbols

Features

Display

Measuring button

Minus button

Function button

Clear/ On/Off button

Plus button

Battery lid

Latch of battery lid

Serial number

Laser warning label

Reception lens

Laser beam outlet

Protective pouch

Target cards

Hand strap

ID tag*

Display Elements

a Temperature warning

bLow battery indicator

cMeasuring functions

Real time measurement

Length measurement

Area/Surface measurement

Volume measurement

Indirect measurement

dLaser activation indicator

eUnit of measure

fCurrent measuring value

gMemory value display

hPrevious measuring value(s)

iError message “Error”

The numbering of the product features shown refers to the

illustration of the measuring tool on the graphic page.

Optional accessory

DO NOT mix battery

chemistries.

Dispose of or recycle batteries

per local code.

DO NOT dispose of batteries

in fire.

Keep batteries out of reach of

children.

Remove batteries if the device

will not be used for several

months.

-9-

Technical Data

Digital Laser Measure GLM 40

Article Number

3601K72910

Measuring range (typical) 6 in - 135 ft (0.15 - 40 m)A

Measuring accuracy (typical) ± 1/16 in (±1.5 mm)B

Lowest indication unit ± 1/32 in (1 mm)

Operating temperature +14 °F to 113 °F(-10 °C to 45 °C)

Storage temperature -4 °F to 158 °F (-20 °C to 70 °C)

Relative air humidity, max 90%

Laser class 2

Laser type 635nm, <1mW

Automatic switch-off after approx.

-Laser 20 s

-Measuring Tool 5 min

Degree of Protection IP54

(dust and splash water protected)C

Batteries 2 x 1.5V (AAA)

Battery service life in measuring

operation, approx 4 h

Weight 0.22 lb (0.1 kg)

Dimensions 4.1 x 1.6 x 0.9 in

(105 x 41 x 24 mm)

A) The working range increases depending on how well the laser light is

reflected from the surface of the target (scattered, not reflective) and with

increased brightness of the laser point to the ambient light intensity (interior

spaces, twilight). In unfavorable conditions, e.g., with extreme illumination

or a badly reflecting surface, the measuring range may be limited.

-10-

Preparation

Inserting/Replacing the Batteries

AAA Alkaline batteries are recommended for the measuring tool.

To open the battery lid

, press the latch

and remove the

battery lid. Insert the batteries. When inserting, pay attention to

the correct polarity according to the representation on the inside

of the battery compartment.

When the battery symbol appears for the first time on the

display, there is approximately 15 minutes of useage remaining

while in real time measurement mode. When the battery symbol

flashes, the batteries must be replaced; measurements are no

longer possible.

Always replace all batteries at the same time. Only use

batteries from one brand and with identical capacity.

Remove the batteries from the tool when not using it for

extended periods.

When storing for extended periods, the

batteries can corrode and discharge themselves.

Operation

Initial Operation

WARNING

Protect the tool against moisture and direct

sun irradiation.

Do not subject the tool to extreme temperatures or variations

in temperature. As an example, do not leave it in vehicles for

longer periods. In case of large variations in temperature, allow

the tool to adjust to the ambient temperature before putting it

into operation. In case of extreme temperatures or variations in

temperature, the accuracy of the tool can be impaired.

B) In favorable conditions, a deviation influence of ±0.05 mm/m must

be taken into account. In unfavorable conditions, e.g., with extreme

illumination, badly reflecting surface or the room temperature deviating

heavily from 77 °F (25 °C), the maximum deviation can be up to ±3.0mm.

Additionally, a deviation influence of 0.15mm/m must be taken into account.

C) Battery compartment not included.

The measuring tool can be clearly identified with the serial number 9on

the type plate.

Altri manuali per GLM 40

Indice

Lingue:

Altri manuali Bosch Strumento di misura

Bosch

Bosch Professional LR 45 Manuale utente

Bosch

Bosch GLM 30 Professional Manuale utente

Bosch

Bosch GLM165-25G Istruzioni per il montaggio

Bosch

Bosch PLL 5 Manuale utente

Bosch

Bosch BEA 550 Manuale utente

Bosch

Bosch Quigo Green Manuale utente

Bosch

Bosch GLM Professional 80 Manuale utente

Bosch

Bosch GLM Professional 250 VF Manuale utente

Bosch

Bosch GLM165-22 Istruzioni per il montaggio

Bosch

Bosch GLM 50 C Professional Manuale utente

Bosch

Bosch FAA-420-RI-DIN Manuale utente

Bosch

Bosch BSA 42 Series Manuale utente

Bosch

Bosch FWA 4650 Manuale

Bosch

Bosch PLR 25 Manuale utente

Bosch

Bosch GRL 400 H Professional Manuale utente

Bosch

Bosch GLM165-22 Manuale utente

Bosch

Bosch GRL 240 HV Istruzioni per il montaggio

Bosch

Bosch 0 603 663 B03 Manuale utente

Bosch

Bosch MTS 5200 LAB SCOPE Manuale utente

Bosch

Bosch GRL Professional 240 HV Istruzioni operative

Bosch

Bosch Rexroth BOS 6000 Manuale utente

Bosch

Bosch PLR 40 C Manuale utente

Bosch

Bosch Zamo Manuale utente

Bosch

Bosch FSA 760 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente