Bosch GLM 42 Istruzioni per il montaggio
IMPORTANT:
Read Before Using
IMPORTANT :
Lire avant usage
IMPORTANTE:
Leer antes de usar
For English Version
See page 6
Version française
Voir page 30
Versión en español
Ver la página 57
Call Toll Free for
Consumer
Information and Service
Locations
Pour obtenir des informations
et les adresses de nos centres
de service après-vente,
appelez ce numéro gratuit
Llame gratis para obtener
información para el
consumidor y ubicaciones
de servicio
Operating/Safety Instructions
Consignes de sécurité/d’utilisation
Instrucciones de funcionamiento y seguridad
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
0.0°
42
⁄
4'02"
8'05"
⁄
12'07"
16'11" ⅜
GLM 42
2610051599 03-18 GLM42.indd 1
3/23/18 9:52 AM
-2-
L⁄
4'02"
W
8'05"
H⁄
12'08"
456.45ft3
2007
GLM 42 3 601 K72 K10
10
5°
10.345m
4.900m
2.500m
126.05m
3
12
11
9
15
5432
1
14 13
678
e
f
a b e g
c
ft/m
d
GLM 42
0.0º
L⁄
4'02"
W
8'05"
H⁄
12'08"
456.45ft
3
See page 12 & 13 for descriptions
Voir les descriptions aux pages 37 & 38
Consulte las descripciones en las páginas 63 y 64
2610051599 03-18 GLM42.indd 2
3/23/18 9:52 AM
-3-
2610051599 03-18 GLM42.indd 3
3/23/18 9:52 AM
-4-
B
X
A
C
A
11.430 m
10.160m
8.890
0.0°
m
m7.620
11.430m
10.160m
8.890
0.0°
m
m7.620
42
42
2610051599 03-18 GLM42.indd 4
3/23/18 9:52 AM
-5-
D
C
X
A
A
B
C
X
C
2610051599 03-18 GLM42.indd 5
3/23/18 9:52 AM
-6-
Read all instructions. Failure to
follow all instructions listed below
may result in hazardous radiation exposure, electric
shock, fire and/or serious injury.
The term “laser measure” in the warnings listed below
refers to your battery-operated (cordless) laser mea-
suring tool.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The following label is on your
laser measure for your safety.
ALWAYS BE AWARE of its
location when using the laser
measure.
DO NOT direct
the laser beam
at persons or animals and do not stare
into the laser beam yourself. This laser
measure produces class 2 laser radiation
and complies with 21 CFR 1040.10 and 1040.11 ex-
General Safety Rules
Safety Symbols
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
!
This is the safety alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
Read manual symbol - Alerts user to read
manual.
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
2610051599 03-18 GLM42.indd 6
3/23/18 9:52 AM
-7-
cept for deviations pursuant to Laser Notice No. 50,
dated June 24, 2007. This can lead to persons being
blinded.
DO NOT stare directly at the laser beam or project
the laser beam directly into the eyes of others. Seri-
ous eye injury could result.
DO NOT place the laser measure in a position that
may cause anyone to stare into the laser beam inten-
tionally or unintentionally. Serious eye injury could
result.
DO NOT operate the laser measure around children
or allow children to operate the laser measure. Seri-
ous eye injury could result.
ALWAYS: Make sure that any bystanders in the vicin-
ity of use are made aware of the dangers of looking
directly into the laser measure.
Never aim the beam at a workpiece with a reflective
surface. Bright shiny reflective sheet steel or similar
reflective surfaces are not recommended for laser
use. Reflective surfaces could direct the beam back
towards the operator.
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
DO NOT use any optical tools such as, but not limited
to, telescopes or transits to view the laser beam. Se-
rious eye injury could result.
DO NOT leave the laser measure “ON” unattended in
any operation mode. ALWAYS turn the laser measure
“OFF” when not in use. Leaving the laser measure
“ON” increases the risk of someone inadvertently star-
ing into the laser beam.
DO NOT operate the laser measure in combustible
areas such as in the presence of flammable liquids,
gases or dust.
Do not use the laser viewing glasses as safety gog-
gles. The laser viewing glasses are used for improved
visualization of the laser beam, but they do not protect
against laser radiation.
2610051599 03-18 GLM42.indd 7
3/23/18 9:52 AM
-8-
Do not use the laser viewing glasses as sun glasses
or in traffic. The laser viewing glasses do not afford
complete UV protection and reduce color perception.
ALWAYS position the laser measure securely. Dam-
age to the laser measure and/or serious injury to the
user could result if the laser measure falls.
Take care to recognize the accuracy and range of the
laser measure. Measurement may not be accurate if
used beyond the rated range of the laser measure.
DO NOT remove or deface any warning or caution
labels. Removing labels increases the risk of exposure
to laser radiation.
Electrical safety
Batteries can explode or leak, cause injury or fire. To
reduce this risk, always follow all instructions and
warnings on the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of
them at the same time with new batteries of the
same brand and type.
DO NOT mix battery chemistries.
Dispose of or recycle batteries per local code.
DO NOT dispose of batteries in fire.
Keep batteries out of reach of children.
Remove batteries if the device will not be used for
several months.
2610051599 03-18 GLM42.indd 8
3/23/18 9:52 AM
-9-
Maintenance
DO NOT disassemble the laser measure. There are
no user serviceable parts inside. Disassembling the
laser will void all warranties on the product. Do not
modify the product in any way. Modifying the laser
measure may result in hazardous laser radiation expo-
sure.
ALWAYS remove the batteries when cleaning the
laser light aperture to laser lens.
DO NOT use this laser measure for any purpose other
than those outlined in this manual. This could result
in serious injury.
ALWAYS use only the accessories that are recom-
mended by the manufacturer of your laser measure.
Use of accessories that have been designed for use
with other laser measures could result in serious in-
jury.
Repair and servicing must always be performed by
a qualified repair facility. Repairs performed by un-
qualified personnel could result in serious injury.
2610051599 03-18 GLM42.indd 9
3/23/18 9:52 AM
-10-
Technical Data
Laser Measure GLM 42
Measuring range (typical): 6 in – 135 ft
(0.15 – 40 m)A
Measuring accuracy (typical)
±1/16 in (±1.5 mm)
B
Lowest indication unit 1/32 in (0.5 mm)
Indirect Distance Measurement and Vial
Measuring range 0°–360° (4 x 90°)
C
General
Operating temperature +14 °F to 113 °F
(-10 °C to 45 °C)D
Storage temperature -4 °F to 158 °F
(-20 °C to 70 °C)
Relative air humidity, max. 90 %
Laser class 2
Laser type 635 nm, <1 mW
Laser beam diameter at 77 °F
(25 °C) approx.
– at 33 ft (10 m) distance
– at 135 ft (40 m) distance
4/11 in (9 mm)
1-2/5 in (36 mm)
Weight 0.22 lb (0.1 kg)
Dimensions 4.2 x 1.8 x 0.9 in
(106 x 45 x 24 mm)
Automatic switch-off after approx.
– Laser
– Laser measure (without mea-
surement)
20 s E
5 min
2610051599 03-18 GLM42.indd 10
3/23/18 9:52 AM
Indice
Lingue:
Altri manuali Bosch Strumento di misura
Bosch
Bosch GRL 250 HV Manuale utente
Bosch
Bosch GLM Professional 80 Manuale utente
Bosch
Bosch DUS 20 plus Manuale utente
Bosch
Bosch gll3-80 P Manuale utente
Bosch
Bosch PDO 6 Manuale utente
Bosch
Bosch PTD 1 Manuale utente
Bosch
Bosch TRANSFLOW j-45096 Manuale utente
Bosch
Bosch Professional GIC 4-23 C Manuale utente
Bosch
Bosch Zamo Manuale utente
Bosch
Bosch Quigo Green Manuale utente
Bosch
Bosch GOL Professional 20 D Manuale utente
Bosch
Bosch GLM 20 Istruzioni per il montaggio
Bosch
Bosch ISN-GMX-P3S Manuale utente
Bosch
Bosch GMS 120 Professional Manuale utente
Bosch
Bosch GIS 1000 C Professional Manuale utente
Bosch
Bosch GIM 60 Professional Manuale utente
Bosch
Bosch BEA 550 Manuale utente
Bosch
Bosch PLR 25 Manuale utente
Bosch
Bosch Rexroth CIMSmart Manuale utente
Bosch
Bosch UniversalHumid Manuale utente
