B+K precision 830C Manuale utente

Model 830C, 890C

Dual Display

Capacitance Meter

INSTRUCTION MANUAL

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Test Equipment Depot - 800.517.8431 -

99 Washington Street Melrose, MA 02176

- FAX 781.665.0780 - TestEquipmentDepot.com

Safety Summary

The following safety precautions apply to both

operating and maintenance personnel and

must be observed during all phases of

operation, service, and repair of this

instrument.

DO NOT OPERATE IN AN EXPLOSIVE

ATMOSPHERE

Do not operate the instrument in the presence

of flammable gases or fumes. Operation of

any electrical instrument in such an

environment constitutes a definite safety

hazard.

KEEP AWAY FROM LIVE CIRCUITS

Instrument covers must not be removed by

operating personnel. Component

replacement and internal adjustments must be

made by qualified maintenance personnel.

DO NOT SUBSTITUTE PARTS OR MODIFY

THE INSTRUMENT

Do not install substitute parts or perform any

unauthorized modifications to this instrument.

Return the instrument to B&K Precision for

service and repair to ensure that safety

features are maintained.

WARNINGS AND CAUTIONS

WARNING and CAUTION statements, such

as the following examples, denote a hazard

and appear throughout this manual. Follow all

instructions contained in these statements.

A WARNING statement calls attention to an

operating procedure, practice, or condition,

which, if not followed correctly, could result in

injury or death to personnel.

A CAUTION statement calls attention to an

operating procedure, practice, or condition,

which, if not followed correctly, could result in

damage to or destruction of part or all of the

product.

SAFETY GUIDELINES

To ensure that you use this device safely,

follow the safety guidelines listed below:

This meter is for indoor use, altitude up to

2,000 m.

The warnings and precautions should be

read and well understood before the

instrument is used.

When measuring in-circuit components, first

de-energize the circuits before connecting to

the test leads.

Never attempt to measure voltage with this

instrument.

Do not use the device if it appears damaged

in form.

Inspect the leads for damaged insulation or

exposed metal. Replace damaged leads if

necessary.

Disconnect power and discharge all

capacitors prior to testing.

The meter is safety-certified in compliance

with EN61010 (IEC 1010-1) Installation

Category II (CAT. II) 50 V, Pollution Degree

2 environment.

Use the meter only as specified in this

manual. Otherwise, the protection provided

by the meter may be impaired.

The power for the meter is supplied with a

single standard 9V battery. It can also

operate from AC line using a 12V AC to DC

adaptor. If a power adaptor is selected,

please be sure to use one with correct AC

line input voltage and fulfills the safety

requirements of a relevant IEC standard.

Use only battery specified by the meter. See

“Installing Battery” section for details.

Safety Symbols

This symbol is a warning and

indicates that the user should refer to

the operating instructions located in

the manual.

DC Current

Indicates inside pin is positive (+),

outside is negative (-)

Compliance Statements

Disposal of Old Electrical & Electronic Equipment

(Applicable in the European

Union and other European countries with separate

collection systems)

This product is subject

to Directive 2002/96/EC

of the European

Parliament and the

Council of the European

Union on waste

electrical and electronic

equipment (WEEE) , and

in jurisdictions

adopting that Directive,

is marked as being put

on the market after

August 13, 2005, and

should not be disposed

of as unsorted

municipal waste. Please

utilize your local WEEE

collection

facilities in the

disposition of this

product and otherwise

observe all applicable

requirements.

Environmental Conditions

Operating Environment 0 °C to 40 °C

Storage Humidity

0 – 80% R.H.

Storage Environment

-20 °C to +50 °C

Pollution degree

Pollution degree 2

TABLE OF CONTENTS

SAFETY GUIDELINES...............................................3

INTRODUCTION.......................................................11

PACKAGE CONTENTS ...........................................13

FRONT PANEL OVERVIEW....................................14

Front Panel Display Descriptions..................................15

Front Panel Buttons......................................................16

LCD DISPLAY OVERVIEW......................................18

LCD Display Descriptions.............................................18

PUSH BUTTONS OVERVIEW .................................20

POWERING INSTRUMENT .....................................22

Installing Battery...........................................................22

Connecting External Power Source..............................24

Low Battery Indication ..................................................27

Backlit Display ..............................................................27

POWER ON OPTIONS.............................................29

Reset HI/LO Limits........................................................29

View Firmware Version.................................................30

Setup Menu ..................................................................30

SETUP OPTIONS.....................................................31

Test Equipment Depot - 800.517.8431 -

99 Washington Street Melrose, MA 02176

- FAX 781.665.0780 - TestEquipmentDepot.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali B+K precision Strumento di misura

B+K precision

B+K precision 5335B Manuale utente

B+K precision

B+K precision RFM3000 Series Manuale utente

B+K precision

B+K precision 894 Manuale utente

B+K precision

B+K precision 5332 Analyst 2050 Manuale utente

B+K precision

B+K precision CP62 Manuale utente

B+K precision

B+K precision 2530B Manuale utente

B+K precision

B+K precision 889B Manuale utente

B+K precision

B+K precision 2652A Manuale utente

B+K precision

B+K precision 880 Manuale utente

B+K precision

B+K precision Sefram DAS1800 Manuale utente

B+K precision

B+K precision 875B Manuale utente

B+K precision

B+K precision 601B Manuale utente

B+K precision

B+K precision DAS60-P Manuale utente

B+K precision

B+K precision 2640 Manuale utente

B+K precision

B+K precision 4063 Manuale utente

B+K precision

B+K precision 2708B Manuale utente

B+K precision

B+K precision 8500B Series Manuale utente

B+K precision

B+K precision 4070A Manuale utente

B+K precision

B+K precision 313C Manuale utente

B+K precision

B+K precision 240A Manuale utente

B+K precision

B+K precision BA8100 Manuale utente

B+K precision

B+K precision 177/V-95 Manuale utente

B+K precision

B+K precision BK603B Manuale utente

B+K precision

B+K precision 308A Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente