B+K precision 600 Manuale utente
12V SLA
Battery Capacity
Analyzer
Analizador De Capacidad
De Baterias
MODEL 600
MODELO 600
MoM
INSTRUCTION
MANUAL
MA
NUAL DE
INSTRUCCIÓN
ES
2
Table of Contents
Section Description Page No.
1GENERAL DESCRIPTION
1.1 Introduction 3
1.2 Application 3
1.3 Specifications 3
2OPERATION 4
2.1 Front Panel Controls 4
2.2 Operating Procedure 5
2.2.1 Connecting Procedure 5
2.2.2 Selecting AH Capacity 5
2.2.3 Conducting a Test 6
2.2.4 Observing Result after a Test 6
2.3 Caution 6
Spanish Manual 9
3
Section 1
General Description
1.1 INTRODUCTION
BK's Battery Capacity Analyser Model 600 measures the % capacity left in a battery. By just selecting proper AH range & pressing TEST
switch user can get the % Balance capacity.
Model 600 supports 12V storage type lead acid batteries with wide range of AH capacity. No external power (Main or DC) is required.
The unit works on BUT (Battery Under Test).
1.2 APPLICATIONS
As the information age develops it is likely that the demand for UPS units will increase for use in hospitals, offices, labs etc. It is expected
that the importance of battery maintenance will increase alongwith increasing demand for UPS.
Looking forward to the future developments the Battery Capacity Analyser can fulfill many applications.
The instrument can be applicable for Automobile Service Stations, UPS Manufacturing, Maintenance and Field Servicing, QC Department,
Battery Systems in Railways, Telecommunications, Ships / Submarine.
1.3 SPECIFICATIONS
TECHNICAL
1) Capacity Display Range: 0% to 100%.
2) Max. Input Voltage:20V.
3) No Load Voltage Indication Accuracy: ±2 counts.
Caution : Do not exceed max. input voltage
rating. Doing so may cause fatal damage to the
unit.
PHYSICAL
1) Dimensions: 80 (W) x 160 (H) x 40 (D) “
2) Weight: 1 Kg. (approx.).
4
Section 2 Operation
FRONT PANEL CONTROLS
Refer to the Front view of the unit.
1) AH Range : With this key the user can select the
correct AH range according to the battery
under test.
2) Select LED:This LED glows toindicate that user can
select the AH range.
3) Locked LED:This LED is ON when the unit locks to a
particular AH range set by the user.
4) Display Mode:This key selects the display either as
No load voltageor % balance
capacity.
5) Batt. Voltage:When displayindicates Batt. voltage this
LED glows.
6) % Balance Capacity:This LED glows when remainingcapacity
is displayed.
7) Load Test:The test startsby pressing this key.
8) Ready:When this LED glows steadily, it indicates
thatthe unit is ready to conduct a test.
9) Test On: This LED glows for approx. 2 sec. when
the battery test is carried out.
10) Reverse Polarity:If the unitis connected to a battery in
reversepolarity this LED
NOTE: Specifications and information are subject to change without notice.
Please visit www.bkprecision.com for the most current product information.
5
2.2 OPERATING PROCEDURE
Follow the steps as outlined below :
2.2.1 Connection Procedure Connect Battery Capacity
Analyser (600) to Battery UnderTest(BUT). Connect the
+ve terminal of 600 to +ve terminal of Battery. Connect-ve
terminal of 600 to –ve terminal of Battery. The 600 will be
powered with the BUT. On Power up, 600 performs a self
test by turning on the 7 segments, LEDs one after another
& finally flashing the version number.
Caution: Do not connect the +ve terminal of 600 to _ve
terminal of BUT and _ve terminal fo 600 to +ve terminal of
BUT. On doing so, the ‘Reverse Polarity’ LED glows as
shown.
2.2.2 Selecting AH Capacity
Press the 'AH Range' key. The select LED glows as
shown.
The display will show the last selected/stored AH value.
(Power ON default value is 7 AH)
To change the value to say 100 AH press the key again.
Display shows new value. Keep on pressing till the
desired AH is obtained.
To Lock the AH capacity, either press any key OTHER
than the AH Range key OR wait for about 10 seconds.
Your selected AH value
will automatically get lockedLocking is indicated by the
glowing of 'Locked' LED.
6
2.2.3 Conducting a Test
Test can be conducted any time by pressing the “Load
Test” key.
By doing so the ‘Test On’ LED starts glowing.
Typically, it glows for about 2 seconds. Thereafter the
‘Ready’ test starts blinking.
(The blinking time depends on the AH range slsected).
Thereafter it becomes steady.
Note: User cannot conduct a test while the ‘Ready’ LED is
blinking.
2.2.4 Observing Result After a Test
By default the Batt. Voltage is displayed on the display. To
observe the Balance Capacity left, press the ‘Display Mode’
switch.
The display will show the capacity in percentage.
Note: Balancce Capacity can have a meaningful value only after
conduction of a test. At power on, a value of 0 is shown. Hence
Balance Capacity should be seen only after conduction of a
test. To observe No Load Batt. Voltage, press the ‘Display
Mode Key’. The display willshow the No Load Batt. Voltage.
2.3 CAUTION
1) Do not connect Model 600 to a voltage source more than 20V.
2) Do not connect the unit to a battery connected in circuit.
7
Service Information
Warranty Service:Please return the product in the original packaging with proof of purchase to the address below. Clearly state in writing
the performance problem and return any leads, probes, connectors and accessories that you are using with the device.
Non-Warranty Service:Return the product in the original packaging to the address below. Clearly state in writing the performance problem
and return any leads, probes, connectors and accessories that you are using with the device. Customers not on open account must include
payment in the form of a money order or credit card. For the most current repair charges please visitwww.bkprecision.com and click on
“service/repair”.
Return all merchandise to B&K Precision Corp. with pre-paid shipping. The flat-rate repair charge for Non-Warranty Service does not include
return shipping. Return shipping to locations in North American is included for Warranty Service. For overnight shipments and non-North
American shipping fees please contact B&K Precision Corp.
B&K Precision Corp.
22820 Savi Ranch Parkway
Yorba Linda, CA 92887
www.bkprecision.com
714-921-9095
Include with the returned instrument your complete return shipping address, contact name, phone number and
8
Limited One-Year Warranty
B&K Precision Corp. warrants to the original purchaser that its products and the component parts thereof, will be free from
defects in workmanship and materials for a period of one year from date of purchase.
B&K Precision Corp. will, without charge, repair or replace, at its option, defective product or component parts. Returned product
must be accompanied by proof of the purchase date in the form of a sales receipt.
To obtain warranty coverage in the U.S.A., this product must be registered by completing a warranty registration form on
www.bkprecision.com within fifteen (15) days of purchase.
Exclusions: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized
alterations or repairs. The warranty is void if the serial number is altered, defaced or removed.
B&K Precision Corp. shall not be liable for any consequential damages, including without limitation damages resulting from loss
of use. Some states do not allow limitations of incidental or consequential damages. So the above limitation or exclusion may not
apply to you.
This warranty gives you specific rights and you may have other rights, which vary from state-to-state.
B&K Precision Corp.
22820 Savi Ranch Parkway
Yorba Linda, CA 92887
www.bkprecision.com
714-921-9095
MANUAL DE INSTRUCCIÓNES
Analizador De Capacidad
MODELO 600
22820 Savi Ranch Parkway
Yorba Linda, CA 92887
www.bkprecision.com
10
INDICE
Sección Descripción Página
1..........................................................DESCRIPCION GENERAL 11
1.1.......................................................Introducción 11
1.2.......................................................Aplicaciones 11
1.3.......................................................Especificaciones 11
2..........................................................OPERACIÓN 12
2.1.......................................................Controles del panel frontal 12
2.1.......................................................Procedimiento de operación 13
2.2.1....................................................Procedimiento de conexión 13
2.2.2....................................................Seleccionando capacidad AH 13
2.2.3....................................................Efectuando una prueba1 14
2.2.4....................................................Observando resultados de una prueba 14
2.3.......................................................Precaución 14
Altri manuali per 600
1
Indice
Lingue:
Altri manuali B+K precision Strumento di misura
B+K precision
B+K precision 2650 Manuale utente
B+K precision
B+K precision DAS60-P Manuale utente
B+K precision
B+K precision 875B Manuale utente
B+K precision
B+K precision 8500B Series Manuale utente
B+K precision
B+K precision 603B Manuale utente
B+K precision
B+K precision Sefram DAS1800 Manuale utente
B+K precision
B+K precision Sefram DAS240 Manuale
B+K precision
B+K precision 308A Manuale utente
B+K precision
B+K precision 830C Manuale utente
B+K precision
B+K precision 2530B Manuale utente
B+K precision
B+K precision 5335C Manuale utente
B+K precision
B+K precision 240A Manuale utente
B+K precision
B+K precision CP62 Manuale utente
B+K precision
B+K precision 467 Manuale utente
B+K precision
B+K precision 830B Manuale utente
B+K precision
B+K precision 600B Manuale utente
B+K precision
B+K precision 601B Manuale utente
B+K precision
B+K precision 602 Manuale utente
B+K precision
B+K precision 830C Manuale utente
B+K precision
B+K precision BK603B Manuale utente
