※You can discharge the beans anytime during the roasting by touching the <EJECT> button, or pulling the <manual discharge valve> at the
back if the bean is not discharged with the <EJECT> button.
※ You can discharge the beans anytime during the roasting by touching the <EJECT> button, or pulling the <manual discharge valve> at the
back if the bean is not discharged with the <EJECT> button.
ENTER UP or DOWN ENTER ENTERUP or DOWN
Text window Temperature
display
Functional
display Button Operation status Remarks
Selecting program PRGM FS UP/DOWN - Selecting program
Start CLEAN /
FS-PRHT START Heater and fan operation
At the rst operation after the power connection
or every third operation, the device will sound
cha tray cleaning alarm (CLEAN).Then clean the
tray and reinstall to release the alarm and switch
to the PREHEAT (preheating)
Preheating FS-PRHT - The drum rotates for 10
seconds per minute. The drum repeats 50s stop and 10s rotation.
Coee green
bean input AD BEAN 165℃ - Drum rotation
Put 300~800cc of Raw coee bean using the
hopper, and release alarm when the temperature
reaches to 120℃
1st heating FS-RP01 150℃ - 〃
1st holding FS-HD01 150℃ - 〃 Not displayed for 0-second
2nd heating FS-RP02 183℃ - 〃
2nd holding FS-HD02 183℃ - 〃 Maintain for 60 seconds
3rd heating FS-RP03 192℃ - 〃
3rd holding FS-HD03 192℃ - 〃Maintain for 60 seconds
Add time AD TIME ENTER 〃
Adding time can be determined 40 seconds
before the 3rd holding /Touching the ENTER
button adds 30 seconds / total 6 times (3
minutes) of adding are allowed
Discharging EJECT EJECT Heater o / outlet open Touch the EJECT button
when the roasting status you want
Cooling COOLING - Outlet close / Drum rotation
o
Open the outlet, and close the
outlet after 30 seconds
Finish FS-END -Fan o Finish after 5 minutes cooling
Determine
save or not PRGEM FS SAVE ENTER / CLEAR To save, touch the ENTER button If not,
touch the CLEAR button
Roasting strength
change PRGEM FS Lighter /
Darker
UP/DOWN and
then ENTER Adjust roasting strength with the UP/DOWN
button, and then touch the ENTER button
Program no.
selection
PRGM 02~20
UP/DOWN and
then ENTER
Select the program to be saved
with the UP/DOWN button and then touch the
ENTER button
※When the roasting reaches the status you want, you can touch the <EJECT> button anytime during the roasting to discharge and for your own programming.
※If no ADD TIME is required, touch the <EJECT> button at the roasting status you want instead of touching the <ENTER> button.
※If you don’t want to save the program, you can touch the <CLEAR> button anytime to return to the initial screen.
PRGM-FS is not a roasting program but a program for user programming, therefore keep monitoring while it is being used.
Neglecting may lead to burn o the bean or cause a re.
※ When the roasting reaches the status you want, you can touch the <EJECT> button anytime during the roasting to discharge and for your own programming.
※
You always need to touch the <ENTER> button for the 1st crack during RP02 and for 2nd crack during RP03. Otherwise, it is progressed according to the built-in conditions.
※ If you don’t want to save the program, you can touch the <CLEAR> button anytime to return to the initial screen.
Text window Temperature
display Functional display Button Operation status Remarks
Selecting program PRGM CS UP/DOWN - Selecting program
Start CLEAN /
CS-PRHT START Heater and fan
operation
At the rst operation after the power connection or every
third operation, the device will sound cha tray cleaning
alarm (CLEAN). Then clean the tray and reinstall to release
the alarm and switch to the PREHEAT (preheating)
Preheating CS-PRHT -
The drum rotates
for 10 seconds
per minute.
The drum repeats 50s stop and 10s rotation.
Coee green
bean input AD BEAN 165℃ - Drum rotation
Put 300~800cc of Coee green bean using the hopper,
and release alarm when the temperature reaches to
120℃
1st heating CS-RP01 150℃ - 〃
1st holding CS-HD01 150℃ - 〃Not displayed for 0-second
Select 1st crack
temperature
After lighting the
1st CRACK, HD02 150~190℃ ENTER 〃
When you can hear the 1st crack sound between
150~190℃,Touch the ENTER button
for automatic maintenance.
2nd holding CS-HD02 150~190℃ -〃Maintain for 60 seconds
Select 2nd crack
temperature
After lighting the
2nd CRACK, HD03 191~200℃ ENTER 〃
When you can hear the 2nd crack sound between
191~200℃,Touch the ENTER button
for automatic maintenance.
Discharging EJECT EJECT Heater o / outlet
open
Touch the EJECT button
when the roasting status you want
Cooling COOLING -Outlet close /
Drum rotation o
Open the outlet, and close the
outlet after 30 seconds
Finish CS-END -Fan o Finish after 5 minutes cooling
Determine
save or not PRGEM CS SAVE ENTER / CLEAR To save, touch the ENTER button If not,
touch the CLEAR button
Roasting strength
change PRGEM CS Lighter /
Darker
UP/DOWN and
then ENTER Adjust roasting strength with the UP/DOWN button,
and then touch the ENTER button
Program no.
selection PRGM 02~20
UP/DOWN and
then ENTER
Select the program to be saved with the UP/DOWN
button and then touch the ENTER button
CRF-800
Smart Ceramic Coee Roaster User Manual
CRF-800
Smart Ceramic Coee Roaster User Manual
Programming using PRGM-FS Programming using PRGM-CS
PRGM-FS START CLEAN : cha tray cleaning Coee green bean input EJECT (Discharging) PRGM-CS ENTER (1 CRACK)
EJECT (Discharging) ENTER UP or DOWN ENTER ENTERUP or DOWN
START (CLEAN : cha tray cleaning) Coee green bean input
ENTER (2 CRACK)
10 11
PRGM-CS is not a roasting program but a program for user programming, therefore keep monitoring while it is being used.
Neglecting may lead to burn o the bean or cause a re.
