Comtrol ROCKETLINX ES7105 Manuale utente

Insert the wires and set the DIP switch using the table below. After setting the DIP

switch to ON, the relay output alarm will detect any power or port failures, and form a

short circuit. The alarm relay output is Normal Open.

Connecting Ethernet Ports

All Ethernet ports support auto MDI/MDIX.

Connect an Ethernet cable into the PoE port of RocketLinx ES7105 switch and the

appropriate network device. The LNK /ACT LED will turn Yellow for 10M Ethernet or

Green for 100M Ethernet. The four PoE ports ( PoE 1 to PoE 4) support PoE OUT. If

the PoE port LED is lit, it indicates that the RJ45 connector has been successfully

connected to a IEEE 802.3af enabled Power Device.

Quick Installation Guide

www.comtrol.com

2000538 Rev C

Comtrol Customer Service

You can contact Comtrol using one of the following methods.

Contact Method Web Address or Phone Number

Support http://www.comtrol.com/pub/en/support

Downloads ftp://ftp.comtrol.com/html/ES7105.htm

Web Site http://www.comtrol.com

Phone 763.957.6000

ROCKETLINX ES7105

Industrial PoE Switch

Introduction Wiring the Power Inputs

Use the following procedure to wire the power inputs. The working voltage is

48VDC or -48VDC.

1. Insert the positive and negative wires into the V+ and V- contact on the terminal

block connector.

2. Tighten the wire-clamp screws to prevent the DC wires from becoming loose.

Wiring the Relay Output

The relay output alarm contacts are in the middle of the terminal block connector.

The RocketLinx ES7105 is an Industrial PoE Power switch that conforms to the IEEE

802.3af Power over Ethernet standard. The RocketLinx ES7105 provides four

10/100BASE-TX PoE ports with one standard 10/100BASE-TX Ethernet port.

For detailed information, refer to the RocketLinx ES7105 User Guide, which is

available on the RocketLinx CD or you can download the latest version.

Package Check List

The following items should be in the product box:



RocketLinx ES7105 Industrial Ethernet PoE Switch



Mounting kit with footpad



Quick Installation Guide



CD-ROM that contains the RocketLinx ES7105 User Guide

Mounting the Unit

If desired, you can use the screws provided in the mounting kit and mount the ES7105

on a wall.

Grounding RocketLinx ES7105 Switch

Connect the frame ground on the switch to an earth ground to ensure safety and to

prevent noise.

PoE Port

1 to 4

Port 5

Fast Ethernet UTP PWR 1

PWR 2

Alarm Relay

1A@DC24V

Earth Ground Screw

iri

the Rel

Outpu

Wire: 12 to 24 AWG

Power 1 Power 2

PWR1 PWR2

1A@24V

FAULT

Relay Output Alarm Contacts

1A@24V

PWR1 PWR2

1A@24V

FAULT

Comtrol Corporation

+1 763.957.6000

[email protected]

www.comtrol.com

Introduction Wiring the Power Inputs

Use the following procedure to wire the power inputs. The working voltage is

48VDC or -48VDC.

1. Insert the positive and negative wires into the V+ and V- contact on the terminal

block connector.

2. Tighten the wire-clamp screws to prevent the DC wires from becoming loose.

Wiring the Relay Output

The relay output alarm contacts are in the middle of the terminal block connector.

The RocketLinx ES7105 is an Industrial PoE Power switch that conforms to the IEEE

802.3af Power over Ethernet standard. The RocketLinx ES7105 provides four

10/100BASE-TX PoE ports with one standard 10/100BASE-TX Ethernet port.

For detailed information, refer to the RocketLinx ES7105 User Guide, which is

available on the RocketLinx CD or you can download the latest version.

Package Check List

The following items should be in the product box:



RocketLinx ES7105 Industrial Ethernet PoE Switch



Mounting kit with footpad



Quick Installation Guide



CD-ROM that contains the RocketLinx ES7105 User Guide

Mounting the Unit

If desired, you can use the screws provided in the mounting kit and mount the ES7105

on a wall.

Grounding RocketLinx ES7105 Switch

Connect the frame ground on the switch to an earth ground to ensure safety and to

prevent noise.

PoE Port

1 to 4

Port 5

Fast Ethernet UTP PWR 1

PWR 2

Alarm Relay

1A@DC24V

Earth Ground Screw

iri

the Rel

Outpu

Wire: 12 to 24 AWG

Power 1 Power 2

PWR1 PWR2

1A@24V

FAULT

Relay Output Alarm Contacts

1A@24V

PWR1 PWR2

1A@24V

FAULT

Comtrol Corporation

+1 763.957.6000

[email protected]

www.comtrol.com

Insert the wires and set the DIP switch using the table below. After setting the DIP

switch to ON, the relay output alarm will detect any power or port failures, and form a

short circuit. The alarm relay output is Normal Open.

Connecting Ethernet Ports

All Ethernet ports support auto MDI/MDIX.

Connect an Ethernet cable into the PoE port of RocketLinx ES7105 switch and the

appropriate network device. The LNK /ACT LED will turn Yellow for 10M Ethernet or

Green for 100M Ethernet. The four PoE ports ( PoE 1 to PoE 4) support PoE OUT. If

the PoE port LED is lit, it indicates that the RJ45 connector has been successfully

connected to a IEEE 802.3af enabled Power Device.

Quick Installation Guide

www.comtrol.com

2000538 Rev C

Comtrol Customer Service

You can contact Comtrol using one of the following methods.

Contact Method Web Address or Phone Number

Support http://www.comtrol.com/pub/en/support

Downloads ftp://ftp.comtrol.com/html/ES7105.htm

Web Site http://www.comtrol.com

Phone 763.957.6000

ROCKETLINX ES7105

Industrial PoE Switch

Insert the wires and set the DIP switch using the table below. After setting the DIP

switch to ON, the relay output alarm will detect any power or port failures, and form a

short circuit. The alarm relay output is Normal Open.

Connecting Ethernet Ports

All Ethernet ports support auto MDI/MDIX.

Connect an Ethernet cable into the PoE port of RocketLinx ES7105 switch and the

appropriate network device. The LNK /ACT LED will turn Yellow for 10M Ethernet or

Green for 100M Ethernet. The four PoE ports ( PoE 1 to PoE 4) support PoE OUT. If

the PoE port LED is lit, it indicates that the RJ45 connector has been successfully

connected to a IEEE 802.3af enabled Power Device.

Quick Installation Guide

www.comtrol.com

2000538 Rev C

Comtrol Customer Service

You can contact Comtrol using one of the following methods.

Contact Method Web Address or Phone Number

Support http://www.comtrol.com/pub/en/support

Downloads ftp://ftp.comtrol.com/html/ES7105.htm

Web Site http://www.comtrol.com

Phone 763.957.6000

ROCKETLINX ES7105

Industrial PoE Switch

Introduction Wiring the Power Inputs

Use the following procedure to wire the power inputs. The working voltage is

48VDC or -48VDC.

1. Insert the positive and negative wires into the V+ and V- contact on the terminal

block connector.

2. Tighten the wire-clamp screws to prevent the DC wires from becoming loose.

Wiring the Relay Output

The relay output alarm contacts are in the middle of the terminal block connector.

The RocketLinx ES7105 is an Industrial PoE Power switch that conforms to the IEEE

802.3af Power over Ethernet standard. The RocketLinx ES7105 provides four

10/100BASE-TX PoE ports with one standard 10/100BASE-TX Ethernet port.

For detailed information, refer to the RocketLinx ES7105 User Guide, which is

available on the RocketLinx CD or you can download the latest version.

Package Check List

The following items should be in the product box:



RocketLinx ES7105 Industrial Ethernet PoE Switch



Mounting kit with footpad



Quick Installation Guide



CD-ROM that contains the RocketLinx ES7105 User Guide

Mounting the Unit

If desired, you can use the screws provided in the mounting kit and mount the ES7105

on a wall.

Grounding RocketLinx ES7105 Switch

Connect the frame ground on the switch to an earth ground to ensure safety and to

prevent noise.

PoE Port

1 to 4

Port 5

Fast Ethernet UTP PWR 1

PWR 2

Alarm Relay

1A@DC24V

Earth Ground Screw

iri

the Rel

Outpu

Wire: 12 to 24 AWG

Power 1 Power 2

PWR1 PWR2

1A@24V

FAULT

Relay Output Alarm Contacts

1A@24V

PWR1 PWR2

1A@24V

FAULT

Comtrol Corporation

+1 763.957.6000

[email protected]

www.comtrol.com

Indice

Altri manuali Comtrol Interruttore

Comtrol

Comtrol RocketLinx MP1204-XT Manuale utente

Comtrol

Comtrol ROCKETLINX ES8509-XT Manuale utente

Comtrol

Comtrol RocketLinx ES8108 Manuale utente

Comtrol

Comtrol RocketLinx ES8108 Manuale utente

Comtrol

Comtrol RocketLinx ES8520-XT Manuale utente

Comtrol

Comtrol ROCKET LINX ES7506 Manuale utente

Comtrol

Comtrol RocketLinx ES7510 Manuale utente

Comtrol

Comtrol ROCKETLINX ES8508 Manuale utente

Comtrol

Comtrol RocketLinx ES8108 Manuale utente

Comtrol

Comtrol RocketLinx ES8108 Manuale utente

Comtrol

Comtrol Rocket linx ES8508 Manuale utente

Comtrol

Comtrol RocketPort Manuale elenco delle parti

Comtrol

Comtrol ROCKETLINX ES7206-XT Manuale utente

Comtrol

Comtrol Rocketlinx ES8108-GigE Manuale utente

Comtrol

Comtrol RocketPort Manuale dell'operatore

Comtrol

Comtrol ROCKET LINX MP1204-XT Manuale utente

Comtrol

Comtrol RocketPort Serial Hub Si Manuale dell'operatore

Comtrol

Comtrol ROCKET LINX ES7506 Manuale utente

Comtrol

Comtrol ROCKETLINX ES8510 Manuale utente

Comtrol

Comtrol RocketLinx ES7506 Manuale utente

Comtrol

Comtrol RocketLinx ES7528 Manuale utente

Comtrol

Comtrol ROCKETLINX ES7510-XT Manuale utente

Comtrol

Comtrol RocketPort RPUSBSH Manuale dell'operatore

Comtrol

Comtrol DeviceMaster DM-2000 Series Manuale dell'operatore

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente