Connects2 CAM-30 Manuale utente

Image Sensor: 1/4” DSC

TV System: NTSC/PAL

Pixels: 720 x 480

TV Lines: 420

Diagonal Degrees: 180

Illumination: 0.3 Lux

Electronic Shutter: 50/60 fps

Gamma Correction: 0.45

Video Output: 1.0V p-p 75ohm

Enhanced Performance In Low Light: Yes

Operating Temperature: -30 Degrees C to +75 Degrees C

Operating Voltage: 6-24V DC (Negative Ground)

Current Consumption: 37mA @ 13.8V

Image Adjustment: Yes (Normal/Mirror)

Camera Mounting Orientation: Horizontal

User Manual

Prior to Installation

Read the manual prior to installation. Technical knowledge is necessary for installation.

Please ensure you use the correct tools to avoid damage to the vehicle or product.

Connects2 can not be held responsible for the installation of this product.

Technical Support

Connects2 want to provide a fast and suitable resolution should you encounter any tech-

nical issues. With this in mind, when contacting Connects2, try to provide as much Infor-

mation as possible. This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: support.connects2.com

Rear View Camera

PRODUCT FEATURES:

DISCLAIMER:

CAM-30

www.connects2.com

Connects2Vision

CONTENTS

- Camera with 3m cable to Male 2.5mm plug

- Adhesive pad and tting accessories

- 8m camera connection cable with Female 2.5mm socket to RCA Male connector,

power, ground and image adjustment wire

- Instructions

INSTALLATION

1. Connect the Black wire to a suitable ground and the Red wire to a switched

+12V supply.

2. If the camera is to be used in the rear of the vehicle, the Red wire should be con-

nected to the reversing light circuit or an interface which provides a reverse signal.

3. If a mirror image view is required, do not connect the Green wire on the camera

connection cable to ground. Connecting the Green wire to ground will provide a

normal image view.

4. Select a suitable location for the camera and ensure that the area is free from all

cables, fuel & oil. Whenever possible, avoid locations that are subject to road dirt &

water spray.

5. Remove the screw located in the camera housing cover, remove the housing

cover and then remove the camera.

6. Attach the camera housing to the vehicle using the adhesive pad and tting

accessories. Ensure that the camera housing is securely mounted to the vehicle and

ret the camera, camera housing cover and screw.

7. Connect the camera cable to the 8m camera connection cable and connect

the connection cable to the display screen and ensure that the image is displayed

correctly.

8. Adjustment of the camera may be required to ensure that the correct angle of

the image is achieved. If adjustment is required, loosen the screw located in the

camera housing, adjust the camera and tighten the screw to lock the camera in

position.

Subscribe to our YouTube Channel for installation

guides and tips... www.youtube.com/connects2

Indice

Altri manuali Connects2 Telecamera da cruscotto

Connects2

Connects2 CAM-VW9.2 Manuale utente

Connects2

Connects2 CAM-VW8 Manuale utente

Connects2

Connects2 Vision CAM-37 Manuale utente

Connects2

Connects2 CAM-PE2 Manuale utente

Connects2

Connects2 Connects2Vision CAM-LR2-AD Manuale utente

Connects2

Connects2 CAM-KIT8 Manuale utente

Connects2

Connects2 Vision CAM-FD13 Manuale utente

Connects2

Connects2 CAM-SK3 Manuale utente

Connects2

Connects2 CAM-CT1 Manuale utente

Connects2

Connects2 CAM-FD14 Manuale utente

Connects2

Connects2 Vision CAM-26 Manuale utente

Connects2

Connects2 CAM-AU5 Manuale utente

Connects2

Connects2 Vision CAM-KIT7 Manuale utente

Connects2

Connects2 CAM-FD24 Manuale utente

Connects2

Connects2 CAM-ST1 Manuale utente

Connects2

Connects2 CAM-MB9 Manuale utente

Connects2

Connects2 CAM-JG1-AD Manuale utente

Connects2

Connects2 Vision CAM-14 Manuale utente

Connects2

Connects2 CAM-FT3 Manuale utente

Connects2

Connects2 Vision AM-44 Manuale utente

Connects2

Connects2 Vision CAM-FD25 Manuale utente

Connects2

Connects2 CAM-1 Manuale utente

Connects2

Connects2 Vision CAM-34 Manuale utente

Connects2

Connects2 CAM-PO1-AD Manuale utente

Manuali Telecamera da cruscotto popolari di altre marche

Cansonic

Cansonic UltraDuo Z2 Manuale utente

Gazer

Gazer F720 Manuale utente

HP f500g Manuale utente

Xblitz

Xblitz TANGO 4K Manuale utente

Rexing

Rexing M1 Manuale utente

Maka Technologies

Maka Technologies Marbella MXPro Manuale utente

NESA

NESA NRC-80DLM Istruzioni per l'installazione e il funzionamento

Kaiser Baas

Kaiser Baas R20 Manuale utente

Boyo

Boyo VTM43TC Manuale utente

Minolta

Minolta MNCD37 Manuale utente

Thinkware

Thinkware FA10 Manuale utente

Momento

Momento MD-5200 Manuale utente

BlackVue

BlackVue DR590X-1CH Manuale utente

HP F300 Manuale utente

CammSys

CammSys BlackSys BH-300 Manuale utente

Snooper

Snooper DVR-2HD Manuale utente

Lukas

Lukas Q900 Manuale utente

RVS

RVS 450C Manuale utente