Creality CR-10 Series Manuale utente

CR- 10 Series 3D Printer User Manual

The User Manual is for the CR- 10 Series of 3D printers. It is also

applicable for the C R- 10S/C R- 10 S4/C R- 10 S5.

But CR- 10 mini without T- Bracket (Right) & Decoration Strip.

Due to the different types of devices ,Hardware and software upgrade. the

devices have little different, it is normal phenomenon. Subject to actual

device received.

Detailed instructions for using are available in the TF card.

V.6.2

Parameters

asic Parameters

Model CR- 10 CR- 10S CR- 10 S4 CR- 10 S5 CR- 10mini

Printing Size 300*300*400mm 300*300*400mm 400*400*400mm 500*500*500mm 300*220*300mm

Molding Tech. FDM

Nozzle Number 1

Slice Thickness 0.1mm- 0.4mm

Nozzle Diameter Standard 0.4mm

Precision ±0.1mm

Fliament 1.75mm PLA

File Format STL/OBJ/ AMF

Working Mode Online or TF card offline

Slice Software Creality Slicer/Cura/ Repetier- Host/Simplify3D

Power Supply Input:AC 115V/ 230V 50/60Hz

Output:DC 12V

Total Power 270W 270W 250W 270W 270W

Bed Temp. ≤100℃ ≤100℃ ≤60℃ ≤60℃ ≤100℃

Nozzle Temp. ≤250℃

Resume Print NO Yes Yes Yes Yes

Filament Detector NO Yes Yes Yes NO

Daul Z- Axis NO Yes Yes Yes NO

language Selection NO EN/CN

Operating System Windows XP/ Vista/ / 7/ 8/ 10 MAC/Linux

Printing Speed ≤180mm/ s，Normal 30- 60mm/s

CONTENTS

Dear consumers,

Thank you for choosing our products. For the best experience, please read the

instructions before operating the Printer. Our 3D team will always be ready to give

you the best service. Please contact us via the phone number or e- mail address

provided at the end when you encounter any problem with the Printer.

For a better experience in using our product, you may learn how to use the Printer in

the following ways:

View the accompanied instructions and videos in the TF card.

Visit our official website www.creality.com You will find relevant software/ hardware

information, contact details and operation and maintenance instructions on the

website.

Introduction................................1

General List................................2

Device Installion.........................3

Cable Connection......................5

Screen Information....................6

Loading Filament...…............…7

Platform Adjustment.................8

Software Installation.................9

For the First Printing................10

NOTES

1. Do not use the printer any way other than described herein in order to avoid

personal injury or property damage.

2. Do not place the printer near any heat source or flammable or explosive objects.

We suggest placing it in a well- ventilated, low- dust environment.

3. Do not expose the printer to violent vibration or any unstable environment, as

this may cause poor print quality.

4. Before using experimental or exotic filaments, we suggest using standard

filaments such as ABS or PLA to calibrate and test the machine.

5. Do not use any other power cable except the one supplied. Always use a

grounded three- prong power outlet.

6. Do not touch the nozzle or printing surface during operation as they may be hot.

Keep hands away from machine while in use to avoid burns or personal injury.

7. Do not wear gloves or loose clothing when operating the printer. Such cloths

may become tangled in the printers moving parts leading to burns, possible

bodily injury, or printer damage.

8. When cleaning debris from the printer hotend, always use the provided tools.

Do not touch the nozzle directly when heated. This can cause personal injury.

9. Clean the printer frequently. Always turn the power off when cleaning, and wipe

with a dry cloth to remove dust, adhered printing plastics or any other material

off the frame, guide rails, or wheels . Use glass cleaner or isopropyl alcohol to

clean the print surface before every print for consistent results.

10. Children under 10 years of age should not use the printer without supervision.

Filament Holder

Control Box

Nozzle Assembly C onnection

Platform C onnection

Power Cable C onnection

Extruder (E) Stepper

X Limit Switch

X Stepper

Z Limit Switch

Z Stepper

Y Limit Switch

Y Stepper

Nozzle Kit

TF Slot and USB Port

Display Screen

Control Knob

Voltage Selection

Platform

Base Frame

Z Gantry Frame

A、Introduction

Tool list

Tool Box Control Box

No. Image Name Qty No. Image Name Qty No. Image Name Qty

1 Spool & Nuts 1set 7 Power Cable 1 13 Spade 1

2 Spool Holder 1 8 USB Cable 1 14 Cable Ties 1set

TF C ard & Card

Reader 1set 9 PTFE Tubing

(spare part) 1 15 Hex keys, Wrench

& Screwdriver 1set

4 T- Bracket (Right) 1 10 Nozzle C leaner 1 16 Spare Parts 1set

T- Bracket

& Z Limit Switch

(Left)

1 11 Filament（200g） 1 17 Decorative Strip 1

6M5X25 Bolt & Lock

Washer 4 sets 12 Diagonal Pliers 1 18 Thumb Screw 3

Base Frame Gantry Frame

*CR- 10 mini without T- Bracket (Right) & Decoration Strip.

B、General List

Note: Make s ure that the nut for

prof ile ha s be en turne d by 9 0 °

before fastening the

T- shaped fixing block.

M5X25

4pcs *CR- 10 mini without T- Bracket (right).

Install the Gantry Frame

Install the T- shaped fixing block.

C、Device Installtion

Install decoration belt into the

notch, starting from one end. Cut off the excess material with

the diagonal pliers

Attach the Decorative Trim to all

parts needing to be decorated.

Attach the Bracket

with two thumb screws.

Attach Spool Holder

with included Nuts

Finished

◆ Install the Rack

◆ Install decoration strip

*CR- 10mini without Decoration Strip.

*The decoration S trip is available in various colors. The pictures above are for reference only.

Connect the aviation connectors to the

ports with corresponding pins

Y Stepper and Limit Switch

Extruder (E) Stepper

X Stepper and Limit Switch

Z Stepper and Limit Switch

Connect the Stepper Motors according to

the yellow labels on the 6pin (4- wire) side.

Connect the Limit Switches according to the

yellow labels on the 3pin (2- wire) side.

•Select the correct input voltage to match your local

mains (230V or 115V)

•Damage can occur if voltage is set incorrectly.

•Make sure the power cable is connected.

D、Introduction

Set Temperature of

the Nozzle

Current Temperature

of the Nozzle

Set Temperature of

the Hot Bed

Current Temperature

of the Hot Bed

Part C ooling Fan

Speed

Current Location of

the nozzle

Print Time

Print Progress

Prompt Message

Print Speed

Device Model

Push：OK/ Enter Sub Menu

Turn：Change Option/Value

E、Screen Information

Altri manuali per CR-10 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Creality Stampante 3D

Creality

Creality Ender-5 Plus Manuale

Creality

Creality HALOT-ONE Manuale utente

Creality

Creality CR-1000 Pro Manuale utente

Creality

Creality HALOT-MAX Manuale utente

Creality

Creality CR-5 Pro Manuale utente

Creality

Creality CR-10 Series Manuale utente

Creality

Creality HALOT-LITE Manuale utente

Creality

Creality HALOT-LITE Manuale utente

Creality

Creality 3D Print Mill Manuale utente

Creality

Creality CR-200B Pro Manuale utente

Creality

Creality Ender-3 Manuale

Creality

Creality CR-X Scheda tecnica

Creality

Creality CR-Laser Falcon Manuale utente

Creality

Creality CR-10 S5 Manuale utente

Creality

Creality CR-10S Pro Manuale utente

Creality

Creality Halot-Sky Manuale utente

Creality

Creality CR-10S Pro Manuale utente

Creality

Creality CREALITY BOX Manuale utente

Creality

Creality Halot-Sky Manuale utente

Creality

Creality CR-Laser Falcon Manuale utente

Creality

Creality Laser Module Manuale utente

Creality

Creality CR-5 Manuale utente

Creality

Creality CR-M4 Manuale utente

Creality

Creality CR-10 Smart Pro Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente