Creality CR-X Manuale utente

CR-X 3D Printer User Manual

◆ This user manual is for standard CR-X.

◆ Because of software or hardware upgrades and model differences, new

revisions may not be listed in this guide.

◆ Please plug the power cord into a three-hole power jack.

◆ Detailed instructions for use are available on the TF card. V.1.2

Notes

1. Do not use the printer any way other than described herein in order to avoid personal

injury or property damage.

2. Do not place the printer near any heat source or flammable or explosive objects. We

suggest placing it in a well-ventilated, low-dust environment.

3. Do not expose the printer to violent vibration or any unstable environment, as this may

cause poor print quality.

4. Before using experimental or exotic filaments, we suggest using standard filaments

such as ABS or PLA to calibrate and test the machine.

5. Do not use any other power cable except the one supplied. Always use a grounded

three-prong power outlet.

6. Do not touch the nozzle or printing surface during operation as they may be hot. Keep

hands away from machine while in use to avoid burns or personal injury.

7. Do not wear gloves or loose clothing when operating the printer. Such cloths may

become tangled in the printers moving parts leading to burns, possible bodily injury, or

printer damage.

8. When cleaning debris from the printer hotend, always use the provided tools. Do not

touch the nozzle directly when heated. This can cause personal injury.

9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a

dry cloth to remove dust, adhered printing plastics or any other material off the frame,

guide rails, or wheels . Use glass cleaner or isopropyl alcohol to clean the print surface

before every print for consistent results.

10. Children under 10 years of age should not use the printer without supervision.

CONTENTS

Dear Consumers:

Thank you for choosing our products. For the best experience, please read the

instructions before operating the Printer. Our 3D team will always be ready to give

you the best service. Please contact us via the phone number or e-mail address

provided at the end when you encounter any problem with the Printer.

For a better experience in using our product, you may learn how to use the

Printer in the following ways:

1. View the accompanied instructions and videos on the TF card.

2. Visit our official website at www.creality3d.cn You will find relevant

software/hardware information, contact details and operation and maintenance

instructions on the website.

Introduction..............................1

General List.............................2

Device Installation.....................3

Cable Connection.....................4

Screen Information...................5

Loading Filament......................6

Bed Leveling.............................7

Software Installation.................8

First Printing..............................9

Corrective Maintenance........10

Circuit Wiring..........................11

1. Extruder 1（E1）

2. Nozzle Kit

3. Touch Screen

4. TF Slot & USB Port

5. Power Switch

6. Power Socket

7. Z-axis Motor

8. Extruder 2（E2）

9. Fliament Holder

10. Coupling

11. Y Limit Switch

12. Z Limit Switch

13. Larger Hand Twist Nut

14. Platform

15. X Limit Switch

16. X Stepper

01/

Introduction

Parameters

Model

CR-X

Printing Size

300*300*400mm

270X270X400mm(Dual Color)

Molding Tech.

FDM

Nozzle Number

Slice Thickness

0.1mm-0.4mm

Nozzle Diameter

0.4mm

Precision

±0.1mm

Fliament

1.75mm PLA

File Format

STL/OBJ/AMF

Working Mode

Online or TF card offline

Slice Software

Creality Slicer/Cura/Repetier-

Host/Simplify3D

Power Supply

Input:100-240V 50/60Hz

Output: 24V

Total Power

480W

Bed Temp.

≤100℃

Nozzle Temp.

≤250℃

Resume Print

Yes

Filament Detector

Auto Leveing

Yes

language

Selection

Yes

Operating System

Windows XP/Vista//7/8/10

MAC/Linux

Printing Speed

≤180mm/s，Normal 30-

60mm/s

Base Frame Gantry Frame

Tool Box

Tool List

Filament(1kg)

No.

Image

Name

Qty

Wrench & Screw

Driver

1 set

TF Card & Reader

1 set

Spade

Pliers

0.4mm

Nozzle Cleaner

No.

Image

Name

Qty

Filament Holder

Bracket

Filament Holder Tube

Nuts

Power Cable

USB Cable

No.

Image

Name

Qty

PTFE Tube

Spare Parts

2 set

M5X25 black Hex-Bolt and

Lock Washer

4 set

M4X8 Screw and

M4 T- nut

4 set

02/

General List

*The list is for reference, subject to the actual object.

Filament Holder Installation Gantry Frame Installation

M5X25

4pcs 4pcs

M4X8

M4 T-nut

M5X25

4pcs

M4X8 & T-nut

X-Axis Spacer

X axis adjustment

100mm 100mm

03/

Device Installtion

*Please plug the power cord into

a three-hole power jack.

Ribbon Cable

04/

Cable Connection

Screen Info.

Main

Sub Menu

Explanation

TF card

Selected File

Stop

Pause

Printing Speed

Nozzle Temp.

Hot-bed Preheat

Fan(off\on)

Temp

Automatic

PLA\ABS（185°\220°）

Manual

Nozzle Preheat

Hot-bed Preheat

Cooling

yes\no

Fan

(off\on)

Setting

Levelling

Please Click Numbers to Assist

Levelling（①~⑤）

Refuel

Withdraw

Feed

Moving

X-axis

Y-axis

Z-axis

Motor off

yes\no

Language

English\Chinese

Printer Info

Machine Type、Firmware Version、

Printing Size、Website

Fan

Manual

Cooling

Automatic

Levelling

Refuel

Motor

Printer Info

Moving

Language

Set Temperature of the

Hot Bed

Set Temperature of

Nozzle

Current Temperature of

Nozzle

Current Temperature of

the Hot Bed

05/

Screen Information

Feeding

Press and hold the extrusion clip, insert the filiment from the inlet

to the position with red line above the small pneumatic connector.

* Check and ensure that the filiment are on the position with the

red line above the small pneumatic fittings before each print to ensure,

otherwise, it will can cause plugging during printing.

Q:How to Replace the Filament？

A: After the nozzles are preheated, quickly send the new

filiment to the postion with the red line above the small

pneumatic fittings.



Method 1、

Method 2、

200

06/

Loading Filament

Preheat

3. Adjust the platform height by turning the knob underneath. Use

a piece of A4 paper (standard printer paper) to assist with the

adjustment, making sure that the nozzle lightly scratches the

paper.

4. Complete the adjustment of the screw on all 4 corners.

5. Click the number ⑤ to test whether the middle gap of the

platform is suitable.

6. Repeat above steps 1-2 times if necessary.

1. Tighten the four levelling nuts at the bottom of the platform

before initial levelling.

2. Select Settings→Levelling, click on the number ①.

07/

Bed Levelling

The nozzle is too far away

from the platform, so the

c o n s u m a b l e s c a n n o t

adhere to the platform.

Filament are extruded evenly,

just sticking on the platform.

The nozzle is too close to

th e p l a t f o r m , a n d t h e

filament are not extruded

enough, even scraping the

platform.

1 2

3 4

Altri manuali per CR-X

Indice

Altri manuali Creality Stampante 3D

Creality

Creality Ender-3 Manuale utente

Creality

Creality CR-M4 Manuale utente

Creality

Creality Ender-5 Manuale

Creality

Creality HALOT-LITE Manuale utente

Creality

Creality CR-6 Max Manuale utente

Creality

Creality HALOT-ONE PRO Manuale utente

Creality

Creality CR-10 Series Manuale utente

Creality

Creality Ender-5 Plus Manuale utente

Creality

Creality CR-30 Manuale utente

Creality

Creality Ender 3 Pro Manuale utente

Creality

Creality CR-X Scheda tecnica

Creality

Creality CR-Scan Ferret 3D Pro Manuale utente

Creality

Creality 3dpRINTmILL Manuale utente

Creality

Creality Sonic Pad Manuale utente

Creality

Creality CR-100 Manuale

Creality

Creality CR-10 Max Manuale utente

Creality

Creality HALOT-ONE Manuale utente

Creality

Creality CR-Laser Falcon Manuale utente

Creality

Creality CR-10S Pro Manuale utente

Creality

Creality CR-100 Manuale

Creality

Creality CREALITY BOX Manuale utente

Creality

Creality CR-10 S5 Manuale utente

Creality

Creality CR-10 Smart Manuale utente

Creality

Creality CR-200B Pro Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente