Creality TL4800 Manuale utente

Creality Sonic Pad

User Manual

V3.0

SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD.

Thank you for choosing our prodcuts. For the better experiecne,

please read the entire instruction before operating the product. Our

teams will always be ready to provide you the best service. Please con-

tact us by phone or email provided at the end of this document if you

encounter any problem with our product.

In addition, you can visit our ofﬁcial website at www.creality.com to

ﬁnd relevant software/hardware information, contact details, opera-

tion, and warranty instructions.

Catalogue

01. Product Description

02. Packing list

03. Interface and button description

04. Operation Precautions

05. First use

06. Daily use

07. System upgrade

08. Advanced options

09. Time lapse video

10. Slicing software displays previews and thumbnails

11. Adaptation of other printers

12. The use of WEB operation terminal

13. SSH account

14. FAQ

When the Creality Sonic Pad is connected to the FDM printer via a

USB cable, it becomes the core system of the printer.

Hardware Speciﬁcations

1. Product Description

CPU

RAM

ROM

USB 2.0 interface

Screen resolution & size

Wi-Fi protocol

LAN interface

Gsensor interface

Power interface

Input voltage

T800

2GB

8GB

1024x600 & 7 Inch

IEEE 802.11b/g/n

100M

PS/2

DC 2.5

12V

2. Packing list

1. Creality Sonic Pad x1

2. 12V power adapter (including adapter) x1

3. G-sensor data cable x1

4. G-sensor x1

5. USB cable x1

6. USB drive x1

7. MicroUSB to MiniUSB connector x1

8. MicroUSB to Type-C connector x1

9. Instructions x1

10. Screw Pack x1

M3*8 self-tapping screw X2

M3*8 machine screw X2

M3*6 machine screw X2

3. Interface and button description

Reset

G-sensor interface

Speaker

Lan interface

USB 3

USB 4

12V power interface

System status light

Power indicator

Power button

M3 mounting holes

USB 1

M3 mounting

holes

USB 2

1. Please use the product strictly in accordance with this manual to

avoid personal injury and property damage.

2. Do not place the machine near any heat source or ﬂammable or

explosive objects. We suggest placing it in a well -ventilated, low-dust

environment.

3. Please use the power adapter that comes with the machine to

prevent damage to the machine.

4. Do not place this product in a vibration or unstable environ-

ment.

5. Please power off to clean the product regularly.

6. Users should comply with the laws and regulations of the corre-

sponding countries and regions where the equipment is located

(used), abide by professional ethics, pay attention to safety obligations,

and strictly prohibit the use of our products or equipment for any

illegal purposes. Creality will not be responsible for any violators' legal

liability under any circustance.

4. Operation Precautions

1. Device connection

1.1 Connect the Creality Sonic Pad to the AC110V/220V power supply

using the power adapter.

5. First use

LANCAMDC

USB

SENSOR

1.2 Connect the Creality Sonic Pad and 3D printer with a USB cable to your

printer (Use the correct adapter if necessary).

LANCAMDC

USB

SENSOR

2. Boot Settings

After the connection is completed, press the power button of the

Creality Sonic Pad to enter the boot-up operation (follow the order of

the guide instructions to conﬁgure the product).

2.1 Startup screen 2.2 Select language

2.3 Select region 2.4.1 Network settings (optional)

2.4.3 The network connection is

completed(optional)

2.4.2 Add a network(optional)

2.5 Privacy setting, click next after

reading and agree by selecting the

checkbox

2.6 Device Rename

2.7 Printer ﬁrmware ﬂashing (upgrade via SD/TF card)

2.7.1 Select printer model(users need to open up the printer to check the mother-

board chip model.

2.7.2 Taking the model Ender-3 S1 as an example, after selecting the model, you

will enter the ﬂashing guide page. Please prepare a card reader and memory card

for the printer ﬂashing.

2.7.3 Write the ﬁrmware to the SD/TF card, then insert the SD/TF card into the

printer, click Next step.

2.7.4 After the printer is powered on, the Creality Sonic Pad will automatically

connect to the printer. (the ﬁrmware in SD/TF will be automatically ﬂashed after

the printer is powered on)

2.7.5 After the printer ﬁrmware is ﬂashed, click Restart.

2.8 Printer ﬁrmware ﬂashing (upgrade via USB cable)

2.8.1 Select the printer (motherboards with chips such as atmega 2560 cannot be

upgraded via SD/TF card)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Creality Stampante 3D

Creality

Creality ENDER-3 V2 Manuale utente

Creality

Creality CR-10 Series Manuale utente

Creality

Creality Ender-3 Istruzioni per il montaggio

Creality

Creality Halot-Sky Manuale utente

Creality

Creality CR-5 Manuale utente

Creality

Creality CR-10 Smart Pro Manuale utente

Creality

Creality CR-100 Manuale

Creality

Creality Ender Manuale utente

Creality

Creality 3dpRINTmILL Manuale utente

Creality

Creality Ender-3 V3 KE Manuale utente

Creality

Creality HALOT-LITE Manuale utente

Creality

Creality Ender-3 V3 SE Manuale utente

Creality

Creality CR-10 S5 Manuale utente

Creality

Creality CR-6 SE Manuale utente

Creality

Creality CR-100 Manuale

Creality

Creality AL-BMG Manuale utente

Creality

Creality CR-10 Smart Manuale utente

Creality

Creality K1 Manuale utente

Creality

Creality Ender-3 S1 Manuale utente

Creality

Creality Halot-Sky Manuale utente

Creality

Creality CR-6 Max Manuale utente

Creality

Creality CR-10 Series Manuale utente

Creality

Creality CR-30 Manuale utente

Creality

Creality CR-M4 Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente