Creativechef VP160 Manuale utente

From Spain

E-mail : fsandoval@astursouring.com

Arroes de arriba,11 33314 Villaviciosa

ASTURSOURCING,S.L.

Vacuum Packaging Machine

Use and Maintenance Manual

VP160/VP180

Preface

Dear user, pleaseread this manual carefully before using it, which is veryimportant for youto use

the equipment properly and thesecurity of the operator. The dangers which may cause in the

process of operation and maintenance of the equipment will bedescribed through symbols in

this manual. And thefollowing symbols are used in thetext for your reference.

English

Safety warning

Dear user, pleaseread this manual carefully before using it, which is veryimportant for youto use

the equipment properly and thesecurity of the operator. The dangers which may cause in the

process of operation and maintenance of the equipment will bedescribed through symbols in

this manual. And thefollowing symbols are used in thetext for your reference.

Notes

This symbolrepresents thebasic information of the equipment and methods ortechniques

used bythe user.

We reviewed the contents of this manual. And we can’t guarantee that the contents is exactly

the same as the actual situation due to the error. But we will review the information periodically

and make necessary corrections and update accordingly. If you haveany concern about the

performance or operation of the equipment after referring to this manual, please contact us

or the distributor before using it.

We are not responsible for any equipment malfunction or accident caused by

installation and use of failure to follow the contents of this manual. All the copyrights of this

manual areowned bythe company and arestrictly prohibited fromspreading, copying and

other infringing actions. In caseof any infringement, the company will retain theright to sue.

Precautions should betaken to prevent the equipment fromdamagewhen removing

packaging. Please check whether thedelivered equipment is consistent with the contact or

requirements, if thedelivery is incomplete or damaged, please notify the distributor.

Contents

English

ontents

. Safety__________________________________________

1.1 Installation_____________________________________________________________

1.2 Risks_________________________________________________________________

1.3 Equipment_____________________________________________________________

1.4 Maintenance___________________________________________________________

. Production parameters________________________________

2.1 Model and specifications__________________________________________________

2.2 Product dimensions_____________________________________________________

2.3 Electrical principle______________________________________________________

.Operation________________________________________

3.1Start-up preparation_____________________________________________________

3.2 Setting_______________________________________________________________

3.3 Operation method______________________________________________________

3.4 Use of external equipment_______________________________________________

3.5 Shutdown operation____________________________________________________

3.6 Oil replace____________________________________________________________

. Common failures and troubleshooting methods___________________

. Others_________________________________________

5.1 Warranty terms_______________________________________________________

5.2 Packing list__________________________________________________________

5.3 Spare parts__________________________________________________________

1、Safety

■ 1.1 Installation

When the equipment is installed, you should select a location that is not

accessible to The child or the person who is not operating the equipment.

Therefore, the children are prohibited from using the equipment!

• It is forbidden to work in outdoor environment of humidity, rain and snow.

• It is forbidden to spray liquid on the equipment.

• The presence of flammable gases or flammable vapors is prohibited around

the equipment.

• The equipment must be used in rugged, stable and flat ground.

• The power must be cut off before the equipment is transported, cleaned and

moved.

• Rollover should be prevented when the equipment is moved to void leakage

of the pump oil.

• Please note the safety symbols or notes pasted on the equipment.

-1-

English

■ 1.2 Risks

Do not contact the live parts when working. It may be fatal to contact with

live parts!

• When the equipment is connected to the power, it must be compatible with

the rated power, frequency and voltage of the equipment.

• Power outlet may be used to connect power of the equipment, but it must

match the circuit breaker and leakage circuit breaker as well as earthing.

• It is prohibited from using a cable with defective or insufficient cross-section.

■ 1.3 Equipment

When the equipment is installed, you should select a location that is not

accessible to The child or the person who is not operating the equipment.

Therefore, the children are prohibited from using the equipment!

• The oil level of vacuum is sufficient when leaving the factory, but the oil level

of the vacuum pump should be inspected regularly.

• If any damage or leakage is found before starting the equipment, it should not

start running.

2、Product dimensions

• To keep the heating wire clean, because the service life of the heating wire

will be shorten due to pollution. And Teflon paint cloth should be wiped clean

with a damp cloth constantly.

• The package may be damaged with long vacuum time. So correct vacuum

time should be set according to the package property.

• When packing the liquid, it should ensure that there is no leakage in the

process of packaging, or it may lead to damage of the vacuum pump.

-2-

English

■ 1.4 Maintenance

• Onlythe people who know or are familiar with the performance of the equipment

or professional maintenance personnel may conduct the maintenance.

• It should be ensured that the equipment is still and its power is cut off with

cover down when maintained.

• Onlythe original accessories can be used when maintained. Some standard parts

are allowed (e.g. screws, etc.).

• It is forbidden to use acid, alkali or other corrosive solutions to wipe the vacuum

cover glass surface and vacuum chamber fuselage.

• It is forbidden to use sharp hard objects to scrape or knock on the glass surface

of vacuum cover.

type VP 160 VP 180

Voltage 220V/50HZ

Power 0.25KW

Gas extraction rate 4m³/h ≧-0.09Mpa

Vacuum oil -5-10℃- ISOVG 32 10-40℃-ISOVG 100

Net weight ≈20KG ≈24KG

Vacuum chamber size 305X300X110mm 355X300X110mm

Vacuum chamber volume ≈7L ≈9L

Sealing dimension 260X6mm 310X6mm

Spacer dimension 260X180X20mm 310X180X20mm

Overall dimension 360X490X210mm 410X490X210mm

■2.1 Product parameters

2. Product parameters

2、Product dimensions

-3-

English

■ 2.2 Product dimensions

■ 2.3 Electrical principle

3. Operation

3.1 Start-up preparation

The following actions must be taken before test!

Note: if the pump has no oil before operation, it may cause engine damage!

3.1.1 Location selection

• The equipment must be installed in a solid and flat face.

• The ground should be non-slip to minimize the risks associated with the

movement of equipment.

• This machine cannot be installed in hazardous areas.

• Please refer to 1.1 for other installation instructions.

3.1.2. Oil level examination

•If necessary, please turn off the power.

• The flip fuselage must befixed to prevent the fuselagefromaccidentally falling down.

• To check theoil level position of the vacuum pump. The oil level is correct in the 2-3/4

position of the endoscope. (the excessive oil must bedischarged through thedrain hole).

• To add appropriate vacuum oil (ISO VG32 or ISO VG100) ,which depending on

operating temperature). Pleaserefer to 3.6 for oil change.

3.2 Setting

The incorrect setting methods may affect the performance of the machine

or the effect of the package.

3.2.1 Control panel

· A program and work status display.

· B Power button, note: This button only opens and closes power supply of the control

panel, not cut off the total power supply of the equipment.

· C Stop button, to press it for return when setting, and press it for stop while working.

· D Setting button, to set all the functional parameters and confirm button.

· E Page up/down and replace the value.

· F Start up button for vacuum pump.

-4-

English

3.2.2 Setting methods

• Press setting button for standby, press page up/down to select program

film stall P0-P9, and press the setting button again to enter work parameter

settings.

• 1/4 vacuum time setting: press page up/down button to set the time of

0-99S. And press the setting button to save it and enter into next step.

• 2/4 charging time setting: press page up/down buttonto set the time of 0-9.9S.

And press the setting button to save it and enter into next step.

• 3/4 sealing time setting: press page up/downbutton to set thetime of 0-3.0S.

And press the setting button to save it and enter into next step.

• 4/4 cooling time setting: press page up/down button to set the time of 2-9.9S.

And press the setting button to save it and return.

• Set the time for 1-4 steps according to the principle from low to high.

• Press setting button for 3S for standby, to enter the functional setting.

• Pressure calibration: press page up/downbutton to calibratethepressure. And

press the setting button to save it and enter into next step.

• Screen protection: press page up/down button to turn onthestandby display.

And press the setting button and enter into next step.

• Button sound: press page up/downbutton to turn off buttonsound. And press

the setting button to save it and enter into next step.

• Language selection: press the page up/down button to select language. And

press the setting button to save it and return.

• Press stop button when setting, and return to standby display.

3.3 Operation methods

Incorrect or improper methods of operation may affect the effect of package.

• Turn onthepower switch, select the programstall and set the time parameters.

See 3.2.2.

• Select packing bags with appropriate size and material, put into thepackaging,

then put thepackage into the vacuum chamber flatly. Attention should betaken

when packing liquids.

• Put the sealing position of the packing bags onthesealing bar flatly, and press

the vacuum cover to start working.

• After the equipment starts working in accordance with the per -set time, the

upper cover bounces off and the work is completed.

-5-

English

3. Operation

3.4 Use of external equipment

• Select the program stall and set the time parameters.

• Open the upper cover, press the pump ① start button, the pump starts to work.

• A vacuum chamber suction nozzle is inserted at one end of the ② gas extraction

device.

• The other end of the ② gas extraction device is inserted into the ③fresh-keeping

tank suction nozzle.When reaching the setting time, it will stop automatically.

• And the work is completed.

• When this function is used,only the pump is working,

and other functions are turned off.

3.5 Shutdown operation

• Turn off power supply of the control panel,

• then turn off the equipment power.

• Please turn off the power when all the

work is completed.

• If it is not used for a long time, unplug the power plug and place it in a cool

and dry place.

3.6 Oil change

The quality of the oil will directly affect the performance and service life of the

vacuum pump. It is recommended to work full 150 hours for oil change for the

first time, later change oil after working for 500 hours. If the pump temperature

rises, and the exhaust outlet has lampblack, oil filter should be replaced.

• Rotate ③ oil drain hole screw and take it out,

thus the oil will be released through the oil hole.

• Install the ③ oil drain hole screw and fasten it.

• Rotate the ① refueling hole knob and take it out.

• Add the oil to the 2-3/4 position of the

② speculum through the ① refueling hole.

• Install the ① refueling hole knob and fasten it.

-6-

English

4. Common failures and troubleshooting methods

-7-

English

Fault

Reasons

troubleshooting methods

The equipment can’t

work

No connection or bad connection for the power

supply cable

Check the connection of power supply cable

Main power is not open or its switch is closed Check the switch

Fuse damaged Check the fuse or replace

Control panel damaged

Check the control panel or replace

The starting switch is not contacted

Adjust the switch to make it contact

No vacuum or low

degree of vacuum

Oil level of the vacuum pump is too low

Add vacuum oil to proper location

The ambient temperature is too low, and the vacuum

oil is frozen

Replace the vacuum oil with appropriate

viscosity

The vacuum pump is damaged

Replace vacuum pump

Leakage of vacuum pump and connecting pipes

Check pumps, connectors, connecting pipes or

replace

Leakage of solenoid valve

Check solenoid valve connector or replace

solenoid valve

The setting working time of vacuum pump is too low

Increase working time for pump properly

Pressure display inaccurate Set pressure calibration the menu

Vacuum chamber seal seam is not good or

damaged

Check or replace the seals

Sealing can’t be done

Heat seal temperature setting is too low Increase heat seal time appropriately

Bad contact or damage caused by sealing

transformer

Check the transformer wire or replace

The sealing heating wire is damaged or broken Check electric wire or replace

Bad contact of sealing power conductor Check the conductors or replace

Seal parts are not raised

Replace airbag solenoid valve

Bad effect of sealing

Heat seal temperature setting is too low or too high

Reduce or increase heat seal time

appropriately

Foreign substances on the surface of the seals

Wipe and clean foreign substances in the seals

Serious air leakage, heating blocks fit loosely

Check pumps, connectors, connecting pipes or

replace

Electric wire deformation or folding

Check electric wire or replace

Teflon paint cloth damaged

Replace Teflon paint cloth

Bad effect of packing

or air leakage

Vacuum pump time is too low or too high

Increase or decrease pump working time

appropriately

Sealing is not bonded which causes air leakage Adjust the sealing time

Sharp hard objects, packing bags are too thin Replace thicker packing bags

Packing small objects with big packing bags

Replace the appropriate packing bag

No gas discharge

after completion of

work

Air discharge solenoid valve not open or damaged

Check air discharge solenoid valve or replace

Control panel damaged Check control panel or replace

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Elettrodomestico da cucina popolari di altre marche

Tayama

Tayama TYG-35AF Manuale utente

AEG

AEG 43172V-MN Manuale utente

REBER

REBER Professional 40 Guida utente

North American

North American BB12482G / TR-F-04-B-NCT-1 Manuale utente

Presto

Presto fountain popper Manuale utente

Westmark

Westmark 1035 2260 Manuale utente

Zanussi

Zanussi ZCG64396XA Manuale utente

HOFFEN

HOFFEN SM-9302M Manuale utente

Philips

Philips HD3133 Manuale utente

Ronco

Ronco Beef Jerky Manuale utente

Hendi

Hendi 470411 Manuale utente

Livoo

Livoo MEN386 Manuale utente

Vogue

Vogue D446 Manuale utente

croydon

croydon WR-10313-700 Manuale utente

ADE

ADE AUTOMATIC-L Manuale utente

Chefman

Chefman RJ43-SQ Series Manuale utente

Vacmaster

Vacmaster VP680 Manuale utente

Jetmaster

Jetmaster 900HG Manuale utente