Crestron Green Light GL-IPAC-SW8 Manuale utente
GL-IPAC-SW8
Crestron Green Light® Integrated Switching
System
Product Manual
Crestron Electronics, Inc.
The original language version of this document is U.S. English.
All other languages are a translation of the original document.
Regulatory Model:
Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_
agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed online at patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron, the Crestron logo, and Crestron Green Light, are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. UL and the UL logo are either trademarks or registered
trademarks of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not
responsible for errors in typography or photography.
©2022 Crestron Electronics, Inc.
Contents
Overview 6
Features 6
Out of the Box Lighting Controls 6
Save Energy 6
Easy Deployment 6
Key Features Include: 7
Specifications 8
Product Specifications 8
Installation 11
Front Panel Controls 11
Wiring Diagram 12
Wiring Guidelines 19
Calculate Power 19
Strip and Tin Wire 20
Add Hubs 20
Configuration 21
Project Settings 22
Panels 23
Changing the Number of External Loads 23
Set External Load IDs 24
Occupancy Sensors 24
Internally Connected Occupancy Sensors 25
Cresnet Connected Occupancy Sensors 25
GLS-SIM Connected Occupancy Sensors 26
Assign an Occupancy Sensor 27
Photo Sensors 29
Photo Sensor Range 29
Lighting Threshold Settings 30
Assign Photo Sensors to Loads 31
Keypads 32
Program Button Function 33
Assign Button Function and Select Loads 33
Remote Keypads 34
Contact Closures 35
Timeclock 36
Time Clock Events 38
Ethernet Settings 39
About 40
Product Manual — Doc. 7389C Contents • iii
v • Contents Product Manual — Doc. 7389C
Product Manual — Doc. 7389C GL-IPAC-SW8 • 6
Overview
The Crestron GL-IPAC-SW8 switching panel provides internal controls for eight circuits of
switched load and is expandable to support up to 64 circuits of switched load by adding external
panels and switching modules. It features local inputs for sensors and keypads, along with an
LCD user interface where installers or users can set up the system without having to connect to
a computer.
The GL-IPAC-SW8 is perfect for smaller-sized installations, such as retail stores, small office
spaces, parking garages, and service stations, which typically require only on/off switching—
eliminating the need for a larger, more expensive panel. In addition, the GL-IPAC-SW8 can be
easily integrated with Crestron automation solutions for centralized monitoring and remote
control of multiple locations.
Features
Out of the Box Lighting Controls
The GL-IPAC-SW8 comes preconfigured for use as the central control processor for a Crestron
Green Light® Power Switching system. Right out of the box, the GL-IPAC-SW8 affords easy
setup and programming for a complete switching system consisting of up to 64 switched loads,
16 local and two remote keypads, 24 occupancy and photo sensors, and 100 time clock events.
Keypads with as many as 12 buttons each can be programmed easily to control lighting loads
and other functions. Lights can be programmed to turn on and off automatically using the built-
in astronomical time clock. Lighting events may be programmed to occur at specific times or at
an offset from sunrise or sunset. Occupancy sensors and photo sensors may also be
implemented to enable automatic on/off lighting control based on room occupancy and ambient
light levels.
Save Energy
Built-in support for occupancy and photo sensors helps to strike a perfect balance between
daylight harvesting and comfort, reducing energy costs. Automatically turn off lights in
unoccupied areas to allow natural light level in the space to light the area. Crestron GLS sensors
can be placed strategically in each space to maximize the benefits of energy management.
Easy Deployment
Packaged in one metal enclosure, the GL-IPAC-SW8 can be deployed in small spaces, including
plenum ceilings. The surface-mount GL-IPAC-SW8 can be affixed to a wall or ceiling rafter,
cleanly out of sight. Standard wire-entry knockouts are provided.
7 • GL-IPAC-SW8 Product Manual — Doc. 7389C
Key Features Include:
lEight internal circuits for switched loads
lExpandable to control up to 64 circuits of switched load
lSupports 100 to 277 volt applications
l16 amp load rating per channel
lBuilt-in astronomical time clock
lPositive air gap at each output
lPhase-independent channels
lLocal controls for setup, testing, and verification
lLocal and remote override capability
lNon-volatile power failure memory
lEasy access is facilitated from the hinged front cover
lCECTitle 24 2013 Compliant
Product Manual — Doc. 7389C GL-IPAC-SW8 • 8
Specifications
Below are the product specifications for the GL-IPAC-SW8. For a list of available accessories,
visit the GL-IPAC-SW8 product page.
Product Specifications
Load Rating
Switched Channels 8 internal;
Expandable up to 64 by adding external panels and modules
Per Channel 16 Amps @ 120 to 277VAC, 50/60 Hz
Switched Load Types Florescent Ballast, Incandescent, Magnetic Low-Voltage, Electronic Low-
Voltage, Neon/Cold Cathode, High-Intensity Discharge, LED, Motor
Relay Lifetime Resistive rating: 100,000 on/off operations, 50A @ 277VAC;
General rating: 50,000 on/off operations, 16A @ 120/277VAC
Power Requirements
Main Power 100-277V AC, 50/60 Hz, via channel 1 (LINE 1, NEUT)
Available Cresnet Power 15 W at 24VDC
Connectors (Class 1)
NEUT (2) terminal blocks, paralleled, line input neutral
Line 1 - Line 8 (16) terminal blocks, line power inputs;
2 connections per channel, paralleled, allows for easy daisy-chaining;
SW1 - SW8 (8) terminal blocks, switch channels outputs
Connectors (Class 2)
Cresnet (1) 4-pin 3.5 mm terminal block;
A maximum of 10 GLS-SIMs may be connected via the Cresnet® terminal block
for occupancy sensors and for photo sensors;
Up to 20 occupancy sensors may be supported (10 external Cresnet sensors and
10 external, non-system sensors connected to the Cresnet network via GLS-
SIM);
Up to 20 photo sensors may be supported (10 external, non-system sensors
wired directly to a Cresnet occupancy sensor and 10 external, non-system
sensors wired to a GLS-SIM using the Cresnet network)
OVR (1) 2-pin 3.5 mm terminal block, comprising (2) inputs for external contact
closures to trigger the preset Override state
9 • GL-IPAC-SW8 Product Manual — Doc. 7389C
Contact Closures (1) 9-pin 3.5 mm terminal block comprising (8) contact closure inputs and (1)
GND port
Sensor Input 1-4 (1) 6-pin 3.5 mm terminal block comprising (4) sensor inputs for internal,
nonsystem occupancy sensors, (1) +24VDC, and (1) GND port (provides sensors
with power)
Sensor Input 5-8 (1) 6-pin 3.5 mm terminal block comprising (4) sensor inputs for internal,
nonsystem photo sensors, (1) +24VDC, and (1) GND port (provides sensors with
power)
USB (1) USB Type-B console port, for communication with Crestron Toolbox™
software
LAN (1) 8-wire RJ-45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
LEDDisplay
Green LCD dot matrix, 128x64 resolution, adjustable LED backlight
Controls and Indicators
▼ and ▲ (2) pushbutton, adjusts menu parameters
ENTER (1) pushbutton, selects underlined item and stores settings
HOME (1) pushbutton, returns to the home page
BACK (1) pushbutton, returns to the previous page
CANCEL (1) pushbutton, cancels current action without saving
HELP (1) pushbutton, opens context-sensitive help screen
Soft Keys (4) pushbuttons for activation of LCD driven functions
PWR (1) Green LED;
Solid illumination indicates line power is applied to NEUT and LINE1
HW-R (1) Recessed miniature push-button for hardware reset (reboots the processor)
SW-R (1) Recessed miniature push-button for software reset (restarts the program)
OVR (1) Red LED and (1) miniature push-button for enabling override mode
ON/OFF ON/OFF: (8) Red LEDs and (8) miniature push-buttons for individual manual
channel activation
Environmental
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Product Manual — Doc. 7389C GL-IPAC-SW8 • 10
Dimensions
Height 12.13 in. (308 mm)
Width 14.13 in. (359 mm)
Depth 4.06 in. (104 mm)
Compliance
ULListed Enclosure
FCC, IC
Altri manuali per Green Light GL-IPAC-SW8
1
Indice
Altri manuali Crestron Sistema di controllo
Crestron
Crestron DIN Rail 4 Series Manuale utente
Crestron
Crestron 4 Series Manuale utente
Crestron
Crestron FlipTop FT2 Series Manuale utente
Crestron
Crestron Prodigy System Manuale utente
Crestron
Crestron FlipTop FT2 Series Manuale utente
Crestron
Crestron 4K DigitalMedia 3-Series Manuale utente
Crestron
Crestron FlipTop FT2 Series Manuale utente
Crestron
Crestron 4 Series Manuale utente
Crestron
Crestron DM-RMC-4KZ-100-C Manuale utente
Crestron
Crestron 4 Series Manuale utente
Crestron
Crestron RMC3 Guida rapida
Crestron
Crestron Zūm Manuale utente
Crestron
Crestron FlipTop FT2 Series Manuale utente
Crestron
Crestron CP4 Manuale utente
Crestron
Crestron AV2 Manuale utente
Crestron
Crestron Prodigy PMC2 Manuale utente
Crestron
Crestron 4 Series Manuale utente
Crestron
Crestron IRP2 Manuale utente
Crestron
Crestron FlipTop FT2 Series Manuale utente
Crestron
Crestron 3 Series Manuale utente
