CTA PAD-PARAFP Manuale utente
Premium Locking Floor Stand Kiosk
with Enclosed Printer Storage & Cable Management
PAD-PARAFP
INSTRUCTION - MANUAL
CONTENTS:
INSTALLATION:
888-733-4448
1. Assembling base
x2
1A. Combine both halves of the base (B) as shown above. Take (1) unit of
the body (A) and align the mounting holes. Rotate in (4) screws (E) with
provided allen key until securely tightened.
2. Attaching Base Pads
2A. Flip over the now combined base section. Find the base pads (H) and
peel off the sticker to expose the adhesive. Place the foam pads (adhesive
face down on base) at the corners and give it a firm press for a few
seconds until it’s securely attached.
3. Assembling Body Segments
3A. Find the other body unit (A) and the printer shelf unit (C). First unlock the
compartments using the keys (I).Then align holes between two body units at
a time. Take (4) screws (E) and using the provided allen key tool (G), rotate
in the screws as shown until securely tightened. Each body segment has it’s
own unique key set. Identify which keys go with each segments. Each key
set is specific to a segment.
A
x2
B
x6
I
x4
D
M5 x 6
x12
E
M5 x 12
x4
J
M6 anchor
x2
F
M5 Allen Key
x1
G
x4
H
x1
C
A
B
G
E
H
B
A
E
I
C
A
(4)
G
I
I
888-733-4448
4. (Optional) Anchoring Base to Floor
4A. Drill (4) holes into the surface using a power drill or like (not
provided). Take the metal anchor (F) and place the casing into the
holes. Then take the screw end and rotate in with screwdriver (not
included) until securely tightened.
4B. If not anchoring into floor, use the (2) hole fillers (D) to plug in for a
more seamless look.
**Tablet and enclosure
shown for illustration,
NOT INCLUDED.
**Monitor shown for
illustration only,
NOT INCLUDED.
**Monitor shown for
illustration only,
NOT INCLUDED.
F (4) D (4)
Assembling Enclosure to
Printer Shelf Component
Assembling Monitor to
Printer Shelf Component
Align the VESA holes of the enclosure to that of
the printer shelf component (C). Rotate in screws
(J) from above using provided allen key tool (G) as
shown until securely tightened.
Align the VESA holes of the monitor to that of the
printer shelf component (C). Rotate in screws (J)
from behind using provided allen key tool (G) as
shown until securely tightened.
(4) M5 x 12
Cable Routing
Cable Management
Unlock all (3) body unit storage compartments
using the correct key for each section. Fish the
cables through as shown and out the opening
at the very bottom as needed.
G
G
J
J
C
J
(4) M5 x 12
J
Altri manuali CTA Rack e supporto
CTA
CTA PAD-MFSV Manuale utente
CTA
CTA PAD-VPOS2BC Manuale utente
CTA
CTA ADD-PARAFS Manuale utente
CTA
CTA PAD-ASK13B Manuale utente
CTA
CTA PAD-PARAFU Manuale utente
CTA
CTA PAD-CHKBM10 Manuale utente
CTA
CTA PAD-ASKM6 Manuale utente
CTA
CTA PAD-PARAFDC Manuale utente
CTA
CTA AUT-VDMC Manuale utente
CTA
CTA PAD-2VDMB Manuale utente
CTA
CTA PAD-PARAFPE Manuale utente
CTA
CTA PAD-UATPB2 Manuale utente
CTA
CTA PAD-PARAPOSW Manuale utente
CTA
CTA PAD-2VDMWA Manuale utente
CTA
CTA PAD-HSKSBAE Manuale utente
CTA
CTA PAD-HGTSB Manuale utente
CTA
CTA PAD-CHKB Manuale utente
CTA
CTA PAD-UGT Manuale utente
CTA
CTA PAD-VADMWE Manuale utente
CTA
CTA PAD-SWM Manuale utente
