CucinaPro 340 Manuale utente

340

APPLE PEELER

CARE INSTRUCTIONS

CAUTION! BE CAREFUL WHEN HANDLING MACHINE

BLADES ARE EXPOSED

• Secure machine onto a clean, dry, smooth surface such as a counter or

table top by turning the suction release lever on the suction base.

• Attach crank handle.

• Release the groove clamp by pushing down on the retaining latch and pull

the crank handle all the way back.

• Spin off the handle.

• Turn the handle around.

• Attach and tighten the handle.

• Check the alignment of the (A) 3-Prong Gripper Fork and the position of the

Corer/Slicer Blade using diagrams A & B.

HOW TO USE

PEEL, CORE, AND SLICE

• Release the groove clamp by pushing down on the retaining latch and pull

the crank handle all the way back.

• Push apple securely onto the 3-Prong Gripper Fork (either end of the apple

will work).

• Simply turn the crank handle until the apple comes in contact with the

blade. If necessary, to adjust the depth at which the blade peels the apple,

loosen the wing nut on the peeler blade and adjust the gap between the

blade and the casting.

• Remove the apple core by releasing the groove clamp and firmly pulling

back on the crank handle. The apple core will pop off the gripper fork.

CORE AND SLICE ONLY

• Carefully pull back on peeler arm and flip retaining latch to hold back the

peeler arm. Leave corer/slicer blade in position.

PEEL ONLY

• Remove (B) corer/slicer blade and use as directed.

CLEANING AND CARE

Immediately after use, rinse the machine with warm water and dry with a

towel. This machine is not dishwasher safe. Hand wash only.

CORRECT

CENTERING BLADE

3 Pronger fork centered

Corer/Slicer Blade

Support Base

Wing Nut

INCORRECT

3 Pronger fork

not centered

Corer/Slicer Blade

Corer/

Slicer

Blade

Corer/

Slicer

Blade

Coring Ring

Coring

Ring

CORRECT

Wing Nut

Blade

Red casting

Gap determines

thickness of peel

INCORRECT

Corer/Slicer Blade

CHANGING THE BLADES

CORER/SLICER BLADE

• When attaching this blade to the frame, make sure the (A) 3-Prong Gripper

Fork is all the way forward by releasing the groove clamp.

• Fit and center (B) corer/slicer blade over (A) 3-prong gripper fork and

support plate with the wing nut and hole (see diagram A). It is very

important to attach the blade with the coring ring facing out, not facing

towards the prongs (see diagram B).

PEELER BLADE

• Loosen wing nut to replace or adjust the blade. Blade can be adjusted

depending on peel thickness (see diagram C).

TROUBLESHOOTING

PROBLEM SOLUTION

Won’t peel

Still won’t peel

Fruit breaks up

before completion

Fruit is not slicing

3-Prong Gripper Fork must be centered

through corer/slicer blade as in diagram A

and peeling blade is set as in diagram C.

Adjust blade (see diagram C) by increasing

gap no further than 1/16” at a time. If the

gap it too big, it will gouge the apple.

Fruit is too soft. Use only fresh, firm fruit.

Corer/Slicer blade is on backwards

(see diagram B).

ONE YEAR LIMITED WARRANTY

CucinaPro warrants to the original purchaser that this product will be free

from defects in material and workmanship under normal home use for one

year from the date of purchase with valid proof of purchase. During this

period, CucinaPro will either repair or replace, at its discretion, any defective

product at no charge to the owner. Replacement products or repaired parts

will be guaranteed for only the unexpired portion of the original warranty or

six months, whichever is greater.

This limited warranty does not apply to any defects resulting from accident,

misuse, improper maintenance, or normal wear and tear. The manufacturing

company is not liable for any incidental or consequential damages incurred

by such circumstances. If for any reason you’re not completely satisfied with

your purchase, you may return your selection with original proof of purchase

for an immediate exchange or refund (less shipping and processing) within 30

days of receipt with valid proof of purchase.

This warranty only applies to CucinaPro products operated in the United

States. CucinaPro products operated outside the United States, the original

purchaser will be responsible for shipping costs. If you believe your product is

defective, please contact CucinaPro Customer Service.

www.cucinapro.com

customerservice@cucinapro.com

Indice

Altri manuali CucinaPro Elettrodomestico da cucina

CucinaPro

CucinaPro 220-05NS Manuale utente

CucinaPro

CucinaPro 300 Manuale utente

CucinaPro

CucinaPro 1550 Guida rapida

CucinaPro

CucinaPro 1447 Manuale utente

CucinaPro

CucinaPro 447 Manuale utente

CucinaPro

CucinaPro 1552 Manuale utente

CucinaPro

CucinaPro 1448 Manuale utente

CucinaPro

CucinaPro 1550 Manuale utente

CucinaPro

CucinaPro 1453 Manuale utente

CucinaPro

CucinaPro 530 Manuale utente

CucinaPro

CucinaPro 1447 Manuale utente

CucinaPro

CucinaPro 1447 Manuale utente

CucinaPro

CucinaPro 1551 Manuale utente

CucinaPro

CucinaPro 1445 Manuale utente

CucinaPro

CucinaPro 760 Manuale utente

CucinaPro

CucinaPro 220-06 Manuale utente

CucinaPro

CucinaPro 220-05P Manuale utente

CucinaPro

CucinaPro 1448 Manuale utente

CucinaPro

CucinaPro 220-05NS Manuale utente

Manuali Elettrodomestico da cucina popolari di altre marche

Tayama

Tayama TYG-35AF Manuale utente

AEG

AEG 43172V-MN Manuale utente

REBER

REBER Professional 40 Guida utente

North American

North American BB12482G / TR-F-04-B-NCT-1 Manuale utente

Presto

Presto fountain popper Manuale utente

Westmark

Westmark 1035 2260 Manuale utente

Zanussi

Zanussi ZCG64396XA Manuale utente

HOFFEN

HOFFEN SM-9302M Manuale utente

Philips

Philips HD3133 Manuale utente

Ronco

Ronco Beef Jerky Manuale utente

Hendi

Hendi 470411 Manuale utente

Livoo

Livoo MEN386 Manuale utente

Vogue

Vogue D446 Manuale utente

croydon

croydon WR-10313-700 Manuale utente

ADE

ADE AUTOMATIC-L Manuale utente

Chefman

Chefman RJ43-SQ Series Manuale utente

Vacmaster

Vacmaster VP680 Manuale utente

Jetmaster

Jetmaster 900HG Manuale utente