CYP CDPS-44SM Manuale utente

CDPS-44SM

HDMI 4x4 Seamless Matrix Switcher

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and is be-

lieved to be accurate. Cypress Technology assumes no responsibility

for any infringements of patents or other rights of third parties which

may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no com-

mitment to update or to keep current the information contained in

this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, tran-

scribed, stored in a retrieval system, or any of its part translated into

any language or computer le, in any form or by any means—elec-

tronic, mechanical, magnetic, optical, chemical, manual, or other-

wise—without express written permission and consent from Cypress

Technology.

Version 1.0 January 2012

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 21/09/26 Preliminary Release

RDV2 17/04/13

RDV3 04/06/13 Matrix mode 1080i@50/60 IN4

Disabled

CONTENTS

1. Introduction........................................... 1

2. Applications.......................................... 1

3. Package Contents ............................... 1

4. System Requirements........................... 1

5. Features................................................. 2

6. Operation Controls and Functions...... 3

6.1 Front Panel ....................................... 3

6.2 Rear Panel........................................ 5

6.3 Remote Control............................... 6

6.3.1 Remote Control Dip Switch......... 7

6.4 RS-232 Protocols .............................. 7

6.5 RS-232 & Telnet Commands........... 8

6.6 RS-232 & Telnet control................. 10

6.7 Telnet Setting ................................. 11

6.8 OSD MENU...................................... 11

7. Connection Diagram ......................... 15

8. Specications ..................................... 16

9. Timing .................................................. 17

9.1 Input Support Timing ..................... 17

9.2 Output Support Timing ................. 18

1. INTRODUCTION

The 4 by 4 HDMI Seamless Matrix Switcher allows the signal from 4 dif-

ferent input sources to be freely selected and arranged on 4 displays

(TV or monitor), providing three output modes (Matrix, Dual and TV

Wall) for various applications. Matrix mode routes the source signals

to output displays as regular matrix does, Dual mode allows 2 sets of

2 selected sources to show on designate output displays with POP

method and TV Wall mode extends a selected source to display on

all 4 output displays as one. The device supports video timings up to

WUXGA@60RB and 1080p@60Hz, audio format up to 7.1CH LPCM at

192kHz sampling rate based on input source EDID. For all the opera-

tion/control can be done through IR, remote control, Telnet, RS-232 or

front panel buttons.

2. APPLICATIONS

• Broadcasting room and control

• Surveillance room and control

• Public advertisement and control

• Digital Presentation

• Conference call or meeting room presentation

3. PACKAGE CONTENTS

• 1 x 4 by 4 Seamless Matrix Switcher

• 1 x Remote Control (CR-125)

• Software CD Driver (Optional)

• 1 x 12V/3A DC Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipments such as DVD/Blu-ray players or any video

signal and PC/Notebook devices and output HD TV/monitor.

5. FEATURES

• HDMI, HDCP1.1 and DVI compliant

• Deep color support 8/10/12 bit source

• Seamless switching

• Supports three different modes: Matrix mode/ Dual mode/ TV Wall

mode

■ Matrix mode: Can routes and output any 4 source to any 4 dis-

plays with seamless switching

Note: Under output timing 1080i@50/60 input 4 will be disabled,

OSD will show “IN 4 Disabled”

■ Dual mode: Can display POP (Picture Of Picture) image com-

bined by 2 sources to be presented on the HDMI output ports

(Dual A and Dual B)

■TV Wall mode: Can output any source to 4 displays (2 by 2

Video wall) as a full image with adjustable Bezel Correction for 4

displays

• Supports OSD, RS232, Telnet, Remote control and on-panel controls

• Input resolutions support VGA~WUXGA and 480i~1080p

• Output resolutions support 480p~1080p

• Supports different input resolution and output resolution selectable

from OSD menu. The factory default value for the output resolution

is 720p@60Hz/ 2CH LPCM

• Audio supports LPCM 2CH, 6CH, 8CH/AC3/DTS/Dolby Digital Plus/

Dolby TruHD & DTS-HD

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

INPUT 234SAVERECALL

OUTPUT BCD

4X4 SEAMLESS MATRIX CDPS-44SM

LOCK

MATRIX/

DUAL/WALL

XGA

720P

1 2 3 4 5 8 9

6 7

1IR Window:

Accept IR signal from the device’s remote control included in the

package.

2Power

 ON/OFF: Press this button to power on the device or set it to

standby mode.

 Factory default: Press Power then connect power supply to

reset the system to Factory default setting.

3MENU:

Press this button to bring up the OSD menu on screen.

Press “MENU” with “-“button to switch output timing to 720P@60Hz

instantly.

Press “MENU” with “+” button to switch output timing to XGA

(1024x768@60Hz) instantly.

4-/+ Buttons:

Press these buttons to scroll down/up the OSD selections then press

“MENU” button to conrm.

5CHANNEL INPUT 1~4 and CHANNEL OUTPUT A~D:

 Matrix mode:

i. Press “Matrix/Dual/Wall” button to switch to Matrix mode and

LED will illuminate constantly.

ii. Press an output from A~D and then press corresponding input

from 1~4. For example: press output A then press input 1,

output A will display input 1’s image. Each output setting must

be made individually.

 Dual mode: To combine 2 sources to be presented on each

HDMI output ports (Dual A and Dual B).

i. Press “Matrix/Dual/Wall” button to switch to Dual mode and

LED unilluminate.

ii. Press output A/B and then press corresponding input 1/2. For

example: press output A then press input 1, output A will

display input 1’s image on the left side, then press output B

and then press input 2, output A will display input 2’s image

on the right side. Both output A and B will have identically

image.

iii. Dual A group are output A and B, Dual B group are output C

and D. Each group will output the same image

simultaneously.

iv. Press button A or B for 3 seconds, to switch Dual A channel’s

audio between output A or B.

v. Press button C or D for 3 seconds, to switch Dual B channel’s

audio between output C or D.

TV Wall mode:

i. Press “Matrix/Dual/Wall” button to switch to TV Wall mode

and LED will blink constantly.

ii. Press input 1~4 to select a source to 4 displays (2 by 2 Video

wall). The audio will be on output A only.

6MATRIX/DUAL/WALL:

Press to switch between Matrix mode, Dual mode and TV Wall

mode. When in Matrix mode the LED will illuminate constantly,

when in DUAL mode the LED will unilluminate and when in TV Wall

mode the LED will blink constantly.

7LOCK:

Press once to lock the keypad and remote control, press 3 second

again to release the lock function.

8SAVE:

To save the customized input and output corresponding settings.

 Press “Matrix/Dual/Wall” button to select mode status.

 Press each output channel A~D and then press corresponding

input channel 1~4.

 Press “SAVE”, the input 1~4 LEDs will all illuminate at the same

time, then press input 1/2/3 or 4 to save to the system memory.

For example: Select Matrix mode, press output A then press

input 4, then press “SAVE”. This will corresponding to remote

control FAV.1~FAV.4.

9RECALL:

When in the mode status “Matrix, Dual or Wall”, press “RECALL”

and the input channel 1~4 LED will illuminate at the same time,

and select input channel 1/2/3 or 4 to recall the customized

screen settings and this will corresponding to remote control

FAV.1~FAV.4.

6.2 Rear Panel

4321 DCBACONTROL

RS232 DC 12V

USB

SERVICE

ONLY

HDMI IN HDMI OUT

1 2 3 4 5 6

1HDMI IN 1~4:

Connect with HDMI source equipments such as DVD/Blue-ray play-

ers and or PC/Notebook devices.

2HDMI OUT 1~4:

Connect with HDMI TV/Monitor/Recorder for output image display

or saving.

3Control:

Connect to an active network for telnet control (Please refer to 6.5

telnet Commands).

4USB SERVICE ONLY:

This slot is reserved for factory use only.

5RS-232:

Connect from PC/Notebook with D-Sub 15pin cables for RS-232

command sending and controling over the device.

6DC 12V:

Plug the 12V DC power supply into the unit and connect the

adaptor to an AC outlet.

Altri manuali per CDPS-44SM

Indice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette

Lindy

Lindy 38042 Manuale utente