CYP CED-S11 Manuale utente
CED-S11
EDID / CEC Selector
Operation Manual
CED-S11
Revision History
Version No Date Summary of Change
V1 20090304 Preliminary Release
Precaution
Failure to follow the precautions described below may cause damage to
EDID/CEC Selector and void the warranty.
DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
DO NOT use third-Party AC adapter or power cord. Doing so may
damage EDID/CEC Selector.
DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
DO NOT set any liquids or beverages on the drive as they may
damage EDID/CEC Selector.
Table of Contents
1
1
1
1
2
3
3
4
4
4
1. Introduction…………………………………………………........……….
2. Application…………………………………………………................….
3. Contents……………………………………………….........................…
4. System Require…………………………………….…………........…….
5. Features…………………………………………….......……........………
6. Operation Controls and Functions…………………………………….
6.1 Front Panel ...............................................................................
6.2 Rear Panel ………………………………………….........….….…
7. Connection and Installation…………………………….........……..…
8. Specications……………………………………………...........………..
1. Introduction
This high performance HDMI v1.3 switcher allows user to set a firm EDID and
CEC between the source and the display. Instead of waiting for signal
configuration with synchronization for displaying this HDMI v1.3 switcher save
time on it and displaying instantly with your desire setting. It also easy user
with configuration choices by push buttoms, power selection of internal/
external, and EDID setting auto/set these useful functions make the unit in
whole to support and satisfy each and every user’s habits.
Please follow this manual to begin enjoying the benefit of your HDMI 1.3 DA.
We suggest keeping it in a safe place for future reference.
2. Application
To set EDID
Be the best choise setting between display and source with instalation
Solve no audio and video issue due to EDID restriction
3. Contents
EDID / CEC selector
5V 2.6A power adaptor
Operational Manual
4. System Require
Input source equipment with HDMI cable and output displayers with HDMI
cable.
1
5. Features
Compliant with HDMI 1.3 and DVI 1.0 standards.
Serial data rate at up to 2.25Gbps, capable of supporting the following
digital video formats in Deep Color Mode at up to 36 bits (12 bits/color):
■DTV resolutions: 480i/p, 576i/p, 720p, 1080i/p
■PC resolutions: VGA, SVGA, XGA, SXGA to UXGA
Supports HD audio-Dolby Digital TrueHD and DTS-HD.
Embedded EDID.
Built-in CEC support with compliant CEC PHY.
HDMI cable distance test with 1080p/8bit or 12bit resolution the input/
output can run up to 10/15 meters.
Supports DVI source & DVI display by using HDMI to/from DVI adaptor
cable.
Can select EDID source from TV or this splitter.
Support CEC by pass or set EDID manually.
Easy to install and simple to operate.
2
①Enter key – Press the button after each selection.
②LED light – Illuminate the actual selection.
③Audio – Select the audio format Bitstream such as Dolby, TrueHD or
DTSHD and LPCM 7.1 or 2.0.
④Deep Color – Select the deep color of 12/10/8 bit.
⑤Resolution - Select the resolution of UXGA, SXGA, XGA, 1080P, 1080I or
720P. Use PC monitor or monitor that support PC mode when selecting
PC resolution UXGA, SXGA or XGA, if using LCD TV with built-in EDID the
device will not record HDMI resolution and may cause display problem.
Note: The above key selections are only functioning when EDID is switched to
SET. Press enter after the selection or the LED light will be blinking,
the image will reset and only the EDID's contents will be changed
according to the selection not HDMI output frame rate or others.
⑥CEC – Select the CEC function by ON/OFF or system reset. Press enter
when switch in between the CEC function. CEC switch to SYS.RST mean
the system will be reset every 8~10min, switch to OFF means eypass CEC
OFF and switch to ON means bypass allowing souce reading display's
CEC.
⑦EDID – Select the EDID format by TV’s or manual selection (SET)
⑧Power – Push the button to power on the device or power off the device
to standby.
6. Operation Controls and Functions
6.1 Front Panel
1 2 3 4 5 6 7
Power
TVON
EDIDCECResolution
Deep
ColorAudioEnter
SET
OFF
SYS.RST
SYS.RST
CEC OFF
CEC ON
1080P
1080I
720P
UXGA
SXGA
XGA
12bit
10bit
8bit
Bitstream
LPCM7.1
LPCM2.0
8
3
7. Connection and Installation
Frequency bandwidth 2.25Gbps (single link)
Input port 1x HDMI female port (Type A connector)
Output ports 1x HDMI female port (Type A connector)
Power Supply 5VDC/2.6A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 97(W) x 125(D) x 30(H)
Weight(g) 250
Chassis Material Aluminum
Color Silver
Operating Temperature from 0°C~ 40°C
Power Consumption 2.7W
8. Specications
DVD / Blue Ray LCD TV
CED-S11
6.1 Rear Panel
POWER
DC 5V HDMI INPUT HDMI OUTPUT
①Power – Plug with 5V 2.6A’s power adaptor and connect to the power
source
②HDMI INPUT – Plug with HDMI cable with input source equipment
③HDMI OUTPUT – Plug with HDMI cable with output display equipment
1 2 3
4
20090306 MPM-CEDS11
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.
Indice
Altri manuali CYP Interruttore
CYP
CYP EL-5500 Manuale utente
CYP
CYP CPLUS-401V Manuale utente
CYP
CYP EL-C81C Manuale utente
CYP
CYP PU-444HBTE Manuale utente
CYP
CYP CDPS-U42HPIP Manuale di installazione
CYP
CYP CDPS-41SQN Manuale utente
CYP
CYP CSC-5300 Manuale utente
CYP
CYP CP-290 Manuale utente
CYP
CYP CMIR-44 Manuale utente
CYP
CYP CH-2537TXWPUS Manuale di installazione
CYP
CYP CLUX-4S2 Manuale utente
CYP
CYP AU-11CA Manuale utente
CYP
CYP CPRO-3D42S Manuale utente
CYP
CYP CH-2537TXM-TB Manuale utente
CYP
CYP AU-D41 Manuale utente
CYP
CYP EL-5300 Manuale utente
CYP
CYP EL-42S Manuale utente
CYP
CYP EL-42HEAC Manuale utente
CYP
CYP CPLUS-V3H1H Manuale utente
CYP
CYP CPLUS-V4H1H Manuale utente
