CYP EL-5400 Manuale utente
EL-5400
HDMI / VGA / Display Port
Presentation Switch
OPERATION MANUAL
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
electrical shock and injury to persons.
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 06/01/12 Preliminary Release
RDV2 07/02/12
RDV3 31/07/12 Add RS-232 Commands
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................4
7.OSD Menu and Function List.................. 5
8. Remote Control...................................... 6
8.1 RS-232 Protocols ...............................7
8.2 RS-232 Commands...........................8
9. Connection and Installation............... 10
.................................... 11
10.1 PC, HDMI, DP Input Timing ..........12
10.2 Output Resolution ........................14
11. Acronyms ........................................... 15
1
1. INTRODUCTION
This high performance video processor which allows 3D movies to be
watched on a 2D display. With HDMI, DisplayPort and PC/Component
inputs to its HDMI output and the associated audio signal processed
synchronously. The operation of both 3D-to-2D and scaling features
can be handled easily through on-panel buttons, IR remote control, or
RS-232 protocol.
2. APPLICATIONS
Convert 3D signal to 2D signal for 2D display
3D source bypass to 3D display without scaling
Scale HDMI, DisplayPort and PC/Component inputs to HDMI output
3. PACKAGE CONTENTS
Ultra High Resolution Scaler with 3D
5V/2.6A DC power adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Input HDMI/DisplayPort/PC sources and output with 2D or 3D HDMI
display.
5. FEATURES
Supports HDMI 3D processing on Frame Packing and Top-
Supports digital and analog audio bidirectional conversion,
or from the HDMI source
Supports component input when connected VGA to 3RCA
adaptor
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
3D
BYPASS 3D
→
2D
ENTER
MENU/
OPTICAL
OUT
IN
AUDIO HDMI OUT
DC 5V
POWER
OPTICAL AUDIO
1
4 5 8 9 10 11 12
2 3 6 7
1MENU/ENTER
the selection.
2-/IN
a. “-“: When in OSD page, sequentially press this button to move
down the OSD selection.
b. “IN”: Press this button to quick enter the input port selection.
3+/OUT
a. “+”: When in OSD page, sequentially press this button to move
up the OSD selection.
b. “OUT”: Press this button to quick enter the output resolution
selection.
43D BYPASS
Press MENU/ENTER and -/IN buttons simultaneously to switch to 3D
bypass without scaling.
5
Press -/IN and +/OUT buttons simultaneously to switch from 3D to
2D.
3
6OPTICAL OUT
7AUDIO L/R OUT
phone jack to the display.
8OPTICAL IN
9AUDIO L/R IN
10 HDMI OUT
This slot is where you connect the HDMI display with HDMI cable.
11 IR sensor
12 DC 5V
Plug the 5V DC power supply into the unit and connect the
turn RED.
4
6.2 Rear Panel
1
2 3 4 5
HDMI 1 HDMI 2 VGA
SERVICE DisplayPort
RS232
IN
1RS232
for RS-232 control.
2SERVICE
update only.
3DisplayPort IN
This slot is where you connect the DisplayPort source output for
DisplayPort signal sending.
4HDMI 1/2 IN
These slots are where you connect the HDMI sources output for
HDMI signal sending.
5VGA IN
This slot is where you connect the VGA source output for VGA
signal sending, when using component signal please have 3RCAto
D-sub 15pin adaptor.
5
7.OSD MENU AND FUNCTION LIST
Input Video PC
COMP
HDMI 1
HDMI 2
DP
Exit
Input Audio AUDIO
Optical
HDMI/DP
Mute
Exit
Output Resolution 720x480P
1280x720P
1920x1080P
640x480
800x600
1024x768
1280x1024
1600x1200
1920x1200
By Native
3D Bypass
Exit
Output Format
3D Bypass
Exit
6
Main Menu 2nd Layer 3rd Layer
Miscellany EDID Mode Internal / External / Exit
Info. OSD Mode Off / On / Exit
About CS-801H FW Ver.
Factory Reset System Reset
Exit
Exit
8. REMOTE CONTROL
1VIDEO IN
Press to select HDMI 1/HDMI
2/DP/PC/Component input
source.
2AUDIO IN
Press to select AUDIO/
or MUTE the system.
3EXIT
Press the EXIT the OSD
selection.
4MENU
Press this button to ENTER the
OSD menu.
5ENTER
6INFO
To show input and output resolution information.
7OUTPUT
Press to show the output resolution table.
8
Press up/down buttons to select OSD selection.
DP
HDMI/DP
MENU
OUTPUTINFO
HDMI 1
PC
AUDIO
MUTE
EXIT
NATIVE
3D →2D 3D BYPASS
HDMI 2
COMP
OPTICAL
ENTER
CR-111
AUDIO IN
VIDEO IN
1
2
4
7
11
8
3
6
9
10
5
7
9
Press to switch from 3D to 2D.
10 3D Bypass
Press to switch to 3D bypass.
11 Native
Press to switch to Native resolution.
8.1 RS-232 Protocols
RS-232 modem cable.
CS-801H Remote Controller
PIN PIN
1N
C 1NC
2 2
3 3
4NC 4NC
5 GND 5 GND
6NC 6NC
7NC 7NC
8NC 8NC
NC NC
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
Indice
Altri manuali CYP Interruttore
CYP
CYP DCT-17 Manuale utente
CYP
CYP DT-21 Manuale utente
CYP
CYP PU-1H2HBTE Manuale utente
CYP
CYP CPRO-U4H1HFS Manuale utente
CYP
CYP EL-41S-4K22 Manuale utente
CYP
CYP CSO-T2 Manuale utente
CYP
CYP CH-1539TXPLPD Manuale utente
CYP
CYP EL-C81C Manuale utente
CYP
CYP XA-S11 Manuale utente
CYP
CYP EL-42S Manuale utente
CYP
CYP EL-5600 Manuale utente
CYP
CYP MED-AS60 Manuale utente
CYP
CYP EL-42HEAC Manuale utente
CYP
CYP EL-C41C Manuale utente
CYP
CYP DCT-17 Manuale utente
CYP
CYP EL-41S-4K22 Manuale utente
CYP
CYP CPLUS-31PS Manuale utente
CYP
CYP CPLUS-V4H1H Manuale utente
CYP
CYP CDPS-U4H4HSA Manuale utente
CYP
CYP EL-41PIP Manuale utente
