Cypress DCT-9 Manuale utente
DCT-9
Universal Digital
/ Analog Audio
Converter
Operation Manual
DCT-9
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 July 2009
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20090713 Preliminary Release
Table of Contents
1
1
1
1
1
2
2
3
4
4
4
5
5
6
1. Introduction…………………………………………………........……….
2. Applications……………………..…………………………................….
3. Package Contents…………………………......…………….............…
4. System Requirements......……………………..….…………........…….
5. Features…………………………………………….......……........………
6. Specications..………………………………………...........………...….
6.1 Input Audio Reerence Level.......................................................
6.2 Input Audio with Output Audio Comparison Chart.................
7. Operation Controls and Functions………………...……........…….…
7.1 Top Panel .................................................................................
7.2 Right Panel ………………………………………….........…….…
7.3 Left Panel .................................................................................
7.4 Back Panel ……………………………..………….........……...…
8. Connection and Installation …….…………………..........…..…..…...
1. Introduction
This comprehensive audio converter device allows users to make a wide use
with audio format and interfaces. With three different types of bidirectional
connectors of optical, Coaxial and L/R, this device can convert all three signals
into the desire format. Analog audio signal can be converts into digital output
and digital audio signal can be converts into analog output. Not only so, it
can be perform simultaneously without any signal loss. The audio converter is
compact and elegant, it is easy to set up and friendly use.
2. Applications
Analog audio signal convert into digital output
Digital audio signal convert into analog output
Simultaneously digital and analog audio output
3. Package Contents
Universal Digital / Analog Audio Converter
Power Adaptor
Operational Maunal
4. System Requirements
Input audio source(s) equipments with connection cable(s) and output signal
with connection cables.
5. Features
Intergrated digital interpolator filter and Digital-to-Analog Converter (DAC)
Integrated Analog –to-Digital Converter (ADC)
Supports sampling frequencies from 16 to 100kHz
Provides elelctromagnetic-noise-free transmission
Easy to install and to operate
Compact size with elegant design
1
Input Ports Optical, Coaxial and L/R
Input Format Toslink, SPIDIF and LPCM 2CH
Sample Frequency 32kHz, 44.1kHz, 48kHz and 96kHz
Output Ports Coaxial, Optical and L/R
L/R Input Impedance 47KΩ
L/R Output Impedance 47KΩ
ESD Protection Humand body model: ±10kV (air-gap discharge)
±6kV (contact discharge)
Power Supply 5V / 1A DC (US/EU standard, CE/FCC/UL certified)
Dimensions(mm) 97(W) x 85(D) x 35(H)
Weight(g) 120
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0ºC~40ºC / 32ºF~104ºF
Storage Temperature -20ºC~60ºC / -4ºF~140ºF
Power Consumption 1W
Relative Humidity 20~90% RH (non-condensing)
6.1 Input Audio Reference Level
Input L/R
Reference
Level/Freq
Output
Output
Reference
Level
Output
T.H.D+N
Signal to
Noise Ratio
L/R
2Vrms
1KHz
L/R 1Vrms±0.05 0.01%↓>90dB
COAX 0 dB~-0.35dB 0.01%↓>90dB
OPTICAL 0 dB~-0.35dB 0.01%↓>90dB
Input COAX
Reference
Level/Freq
Output
Output
Reference
Level
Output
T.H.D+N
Signal to
Noise Ratio
COAX
OdBFS
1KHz
L/R 1Vrms±0.05 0.01%↓>90dB
COAX 0 dB±0.05 0.01%↓>90dB
OPTICAL 0 dB±0.05 0.01%↓>90dB
6. Specications
2
Input Ports Optical, Coaxial and L/R
Input Format Toslink, SPIDIF and LPCM 2CH
Sample Frequency 32kHz, 44.1kHz, 48kHz and 96kHz
Output Ports Coaxial, Optical and L/R
L/R Input Impedance 47KΩ
L/R Output Impedance 47KΩ
ESD Protection Humand body model: ±10kV (air-gap discharge)
±6kV (contact discharge)
Power Supply 5V / 1A DC (US/EU standard, CE/FCC/UL certified)
Dimensions(mm) 97(W) x 85(D) x 35(H)
Weight(g) 120
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0ºC~40ºC / 32ºF~104ºF
Storage Temperature -20ºC~60ºC / -4ºF~140ºF
Power Consumption 1W
Relative Humidity 20~90% RH (non-condensing)
6.1 Input Audio Reference Level
Input OPTICAL
Reference
Level/Freq
Output
Output
Reference
Level
Output
T.H.D+N
Signal to
Noise Ratio
OPTICAL
OdBFS
1KHz
L/R 1Vrms±0.05 0.01%↓>90dB
COAX 0 dB±0.05 0.01%↓>90dB
OPTICAL 0 dB±0.05 0.01%↓>90dB
6.2 Input Audio with Output Audio Comparison Chart
Audio Input
Source Output Output
Format Remark
L/R
Analog 2CH
L/R Analog 2CH
COAX PCM2CH(48KHz)
OPTICAL PCM2CH(48KHz)
OPTICAL
AC3/DTS
L/R
No Support
(Support optical / coaxial
LPCM 2CH only)
Odd sound
may appear
COAX AC3/DTS Bypass
OPTICAL AC3/DTS Bypass
COAX
AC3/DTS
L/R
No Support
(Support optical / coaxial
LPCM 2CH only)
Odd sound
may appear
COAX AC3/DTS Bypass
OPTICAL AC3/DTS Bypass
3
①Power: Power LED indicator. When power on the device the LED is green,
when turn off the device the LED is red.
②Input Analog 2CH LED indicator. When selecting input L/R, blue LED will
illuminate.
③Input COAX: Input Coax LED indicator. When selecting input COAX, blue
LED will illuminate.
④Input OPTICAL: Input OPTICAL LED indicator. When selecting input
Optical, blue LED will illuminate.
7. Operation Controls and Functions
7.1 Top Panel
7.2 Right Panel
1 2 3
POWER L/R COAX OPTICAL
UNIVERSAL
DIGITAL / ANALOG
AUDIO CONVERTER
4
①OPTICAL: Connect from audio source equipment’s optical audio output
with optical cable.
②COAX: Connect from audio source equipment’s coaxial audio output
with coaxial cable.
③L/R: Connect from audio source equipment’s L/R audio output with L/R
RCA jack cable.
1 2 3
4
7.3 Left Panel
①L/R: Connect to audio equipment’s L/R input such like TV or amplifier
with L/R RCA jack cable.
②COAX: Connect to audio equipment’s coaxial input such like TV or
amplifier with coaxial cable.
③OPTICAL: Connect to audio display equipment’s optical input such like
TV or amplifier with optical cable.
2 31
7.4 Back Panel
1
①DC 5V Power Jack: Plug 5V 1A DC power supply into the unit and
connect the adaptor to AC wall outlet.
②INPUT SELECT: Use this switcher to select input from optical, coaxial or L/R.
③Power Switch: Push to button to turn on or switch off the device.
2 3
5
8. Connection and Installation
TV
Optical
or
or
or
Amplifier
Blue Ray
DVD
Set-top-Box
L/R
Coaxial
Coaxial
Optical L/R
6
Altri manuali per DCT-9
1
Indice
Altri manuali Cypress Convertitore multimediale
Cypress
Cypress CSY-2100 Manuale utente
Cypress
Cypress CCR-2SRGB Manuale utente
Cypress
Cypress CSLUX-1080p Manuale utente
Cypress
Cypress CSLUX-300I Manuale utente
Cypress
Cypress PCHD-HDMI-SCALER Manuale utente
Cypress
Cypress CP-293 Manuale utente
Cypress
Cypress CP-260D Manuale utente
Cypress
Cypress CP-254 Manuale utente
Cypress
Cypress CVLUX-1080P Manuale utente
Cypress
Cypress CMDP-DL2DVI Manuale utente
Cypress
Cypress CP-261HS Manuale utente
Cypress
Cypress OSM-2400 Manuale utente
Cypress
Cypress CVSD-3A Manuale utente
Cypress
Cypress CV-401D Manuale utente
Cypress
Cypress CHQV-2H Manuale utente
Cypress
Cypress CM-1392M Manuale utente
Cypress
Cypress DCT-15 Manuale utente
Cypress
Cypress CDM-660 Manuale utente
Cypress
Cypress CM-398H Manuale utente
Cypress
Cypress CCR-8 Manuale utente
