DFI EC70A-SU Manuale utente
1
EC70A-SU Installation Guide
Package Contents
DFI reserves the right to change the specifications at any time prior to the product's release. For the latest revision and details of the
installation process, please refer to the user's manual.
www.dfi.com
•
1 EC70A-SU system unit
• Mounting screws for SATA drive
•
Mounting screws for Mini PCIe module
•
1 Quick Installation Guide
•
1 CD disk includes:
-Drivers / Manual
Panel
Front View
Power
(green)
Reset
HDD LED
(blue)
Status LED
(blue)
VGACOM 1 COM 4/ 8-bit DIOCOM 2
Rear View
HDMI
Antenna
hole
COM 3
LAN 1~2 DC-in
USB 3.0
Line-out
Mic-in
Switch
USB 3.0
Antenna
hole
2
Installing a 2.5" SATA Drive
2. Locate the SATA drive bay on the system board. Remove 4 mounting screws that secure the drive
bay to the system board.
3. Align the mounting holes of a SATA drive with the mounting holes on the drive bay and connect the
SATA cable (data and power) to the 2.5" SATA drive. Then, use the provided HDD mounting screws
to affix the HDD to the drive bay.
1. Remove the two screws securing the chassis cover and lift the cover to open the system.
Mounting screw
SATA drive bay
SATA drive bay
SATA power connector
SATA connector
Chassis screw
Mounting screws
3
4. Place the SATA with the attached drive bay to the system and connect the SATA cable to the SATA
connectors on the system board.
5. Secure the SATA drive bay with the mounting screws you removed in step 1.
Mounting screw
SATA cable
SATA data connector SATA power connector
Mounting screw
Mounting screw
2.5" SATA drive
SATA data and power cable
4
Installing a Mini PCIe Card
Note:
The system also has a half-size Mini PCIe slot that can accommodate either a Mini PCIe or an mSATA
card. Refer to jumper settings for signal selection for this slot.
The system board is equipped with 2 Mini PCIe slots: one full-size and one half-size slot. Here we will
demonstrate the installation of a full-size Mini PCIe card.
1. Grasp the Mini PCIe card by its edges and align the notch in the connector of the PCIe card with
the notch in the connector on the system board.
2. Push the Mini PCIe card down and use the provided mounting screw to secure the card on the
system board.
Mounting Screw
5
Board Layout and Jumper Settings
A44701653
Note:
You cannot use COM 4 and DIO at the same time.
Please set JP1 and JP2 together.
www.dfi.com
DC-in
1
6
1
1
1
3
1
1
Mini PCIe
1
1
12
12
1
Reset
Power
Front
Panel
(JP11)
DDR4 DDR4 DDR4 DDR4
COM 4
LAN 2 LAN 1
USB 2
USB 1
USB 3.0
USB 4
USB 3
COM 3
COM 2 COM 1
VGA
USB 3.0
SATA 3.0
SPI Flash
BIOS
JP2
JP1
Battery
JP7
Mini PCIe
MIC-inLINE-out
DP
SATA 2 SATA Power
Realtek ALC888
Intel
WGI210AT
JP3
JP4
COM4/DIO Pin Select
COM4/DIO Pin Select
Clear CMOS
Mini PCIe PCIe/
SATA Select (JP3)
(JP4)
Auto PWR ON
(JP1)
(JP2)
(JP7)
COM4 / DIO Pin Select JP1
COM4 1-2, 4-5, 7-8,
10-11 On
DIO 2-3, 5-6, 8-9,
11-12 On
COM4 / DIO Pin Select JP2
COM4 1-2, 4-5, 7-8,
10-11 On
DIO 2-3, 5-6, 8-9,
11-12 On
Mini PCIe PCIe/SATA Select JP3
PCIe 2-3 On
SATA 1-2 On
Clear CMOS JP4
Normal 1-2 On
Clear CMOS 2-3 On
Auto PWR ON JP7
Normal 1-2 On
Auto-PWR ON 2-3 On
Altri manuali per EC70A-SU
1
Indice
Altri manuali DFI PC industriale
DFI
DFI EC510-KH Manuale utente
DFI
DFI EC500-ADS Manuale utente
DFI
DFI DT200-CS Manuale utente
DFI
DFI DT200-CS Manuale utente
DFI
DFI EC531-SD Manuale utente
DFI
DFI VC900-M8M Manuale utente
DFI
DFI EC541-HD Manuale utente
DFI
DFI EC531-HD Manuale utente
DFI
DFI EC51 CS Series Manuale utente
DFI
DFI ST102-SD Manuale utente
DFI
DFI EC102-XNX Manuale utente
DFI
DFI EC510 Manuale utente
DFI
DFI GM831-CSF Manuale utente
DFI
DFI KS156P-EHL Manuale utente
DFI
DFI EC500-KH Manuale utente
DFI
DFI EC500-HD Manuale utente
DFI
DFI EC300 Series Manuale utente
DFI
DFI EC500-ADS Manuale utente
DFI
DFI KS156-AL Manuale utente
DFI
DFI EC70A-KU Manuale utente
